Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Moroso 63420 Manifold Filler Neck

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Centerline of Holes:
3.25
Material Type:
Aluminum
Overall Height:
3.50
Overall Length:
4.50
Sold in Quantity:
Each
Finish:
Natural
Filler Neck Height:
.88
Tube Length:
1.50
Outside Diameter:
1.88
Thread Pitch:
3/8"-16
Hose ID:
1.55
Tube I.D.:
1.30
Gasket(s) Included:
Yes
Hardware Included:
Yes
MFG. Part #:
63420
Notes
Has (1) 1/2" NPT fitting and (2) 1/4" NPT fittings. Filler neck has a 3/8" hose barb.
Moroso 63420 Manifold Filler Neck
Moroso 63420 Manifold Filler Neck

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Makes manifold the highest filling point.  For cooling problems where radiator is mounted low. Fits both right or left applications. Sender mount. Fits GM V8, 90° V6.

  • Locates filler neck at highest point on cars with low-mount radiators to bleed off air
  • Unit can be flipped 180° for either right or left outlet location
  • Includes 1/2" NPT fitting for installing water temperature sending unit and two 1/4" NPT fittings for return lines on popular aftermarket cylinder heads
  • Made of 356-T6 cast aluminum; 3-1/4" high
  • Includes gaskets, bolts and washers, and standard size radiator cap filler neck
  • Cap is NOT included

 

Specs


You may also be interested in:

Speedway 180 Degree High Flow Thermostat
SKU-91015703
                        

Speedway takes a quality Robertshaw 330-180 high flow 180° thermostat, then modifies it to function properly in high RPM, high flow applications. They feature a balanced sleeve design and are strongly recommended for any performance application. Fits most domestic applications.

  • 2-1/8" diameter 
  • High flow 180° thermostat
  • Balanced sleeve design
  • Recommended for any performance application
  • Fits most domestic applications

Learn more about the importance of the thermostat with cooling systems and how they work by reading our tech article, Cooling System Principles.

Stant 10393 High Pressure Racing Radiator Cap, 28-32 Lbs
SKU-91015707
                        

Used by all the top NASCAR teams. The best high pressure radiator caps you can buy!

Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles

Speedway Straight Silicone Radiator Hose, 6 Inch Long
SKU-9171006
                        

These 6" long silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated).

Choose hose diameter (I.D.) needed.

 

Speedway Manifold Filler Neck
SKU-5752200
                        

This neck allows you to fill your cooling system at the intake manifold if you radiator is lower than the intake. It can be flipped over for RH or LH upper hoses, and has two 1/4" npt and one 1/2" npt hole in the back for bypass lines or sending units. Fill cap plate has a 7/16" pipe nipple welded into the overflow area.

Fits Small Block or Big Block Chevy V8.

AFCO 80152-16 Billet Aluminum Radiator Cap
SKU-1068015216
                        

This 16 lb. radiator cap is made of billet aluminum and fully polished.

Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles.  

Water Outlet Restrictor Kit
SKU-54563440
                        Fits all GM V8s, V6s, and small block Fords. Three aluminum water outlet restric plates with 5/8", 3/4" and 1" diameter holes.