Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Moroso 65750 Lightweight Fuel Pump Pushrod

Moroso 65750 Lightweight Fuel Pump Pushrod
Moroso 65750 Lightweight Fuel Pump Pushrod

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

This lightweight fuel pump push rod helps prevent fuel pump arm float at high RPM and subsequent fuel starvation. Fits both Small Block Chevy (SBC) and Big Block Chevy (BBC).

  • For use in Drag, Oval Track and Street-Performance applications

 

You may also be interested in:

Small Block Chevy Fuel Pump Seals
SKU-91011853
                        

This seal was originally developed to contain lubrication inside the fuel pump cavity in order to lubricate the pump arm, but it also allows the pump to deliver cooler fuel to the carburetor. Uses a molded neoprene seal bonded to an alloy plate to seal around the pump arm. A special insulating gasket and sleeved, insulated bolts also cut down on the engine heat transferred to the pump to further reduce fuel temperature. 

  • 91011853-Hol
    • Fits old style Holley/Edelbrock pumps w/ 1/2" NPT ports on opposite end
  • 91011853-Car
    • Fits new style Holley/Carter fuel pumps
Red Line 80312 Engine Assembly Lube, 4 Oz.
SKU-60710004
                        

Red Line Oil Assembly Lube is not designed to be the cheapest – it's built to be the best. It has three times greater film-strength than conventional black Molybdenum Disulfide lubricants. Provides excellent rust and corrosion protection. Stays put and supplies a high film strength for protection. Excellent for crankshaft installation. Can be used safely with all metals, including bearings. Can be used with petroleum or synthetic oils.

  • Prepares potential wear surface and prevents metal contact before adequate lubrication can be supplied
  • Will not plug filters after initial engine start-up, unlike other assembly lubes
  • Provides 3x greater film strength than conventional black Molybdenum Disulfide greases
  • Excellent rust and corrosion inhibitor, allows for long-term storage
  • For use on camshafts, lifters, pushrods, piston skirts, main and rod bearings, and bolt threads
  • Do not use on exhaust bolts or other high temperature bolts which require an anti-seize
  • Recommended and used by top camshaft and drivetrain manufacturers

Assembly Lube Product Data (PDF)

Learn why using assembly lube is so important in our tech article, Installing New Hardware.

Chevy Fuel Pump Push Rod for Roller Cams
SKU-91511985
                        

These lightweight fuel pump pushrods are specifically for use with 8620 and 9310 steel billet roller and slot hardfaced camshafts. One end of the pushrod has a bronze tip to bear against the fuel pump eccentric on the camshaft, eliminating the wear problems that occur when using a standard fuel pump pushrod (especially in endurance type applications).

  • Fits both S/B Chevy 262-400 (1955-1995) and B/B Chevy 396-454 (1965-1990)
  • Heat treated tubular steel construction
  • Centerless ground for concentricity
  • Much lighter than solid steel O.E. type pushrods

 

 

Chevy Fuel Pump Push Rod for Flat Tappet Cams
SKU-91511986
                        

This tubular steel fuel pump pushrod is for hydraulic and mechanical "cast" type flat tappet camshafts. Both ends of this pushrod are steel tipped for the best wear characteristics.

Fits both S/B Chevy 262-400 (1955-1995) and B/B Chevy 396-454 (1965-1990).

  • Heat treated tubular steel construction
  • Centerless ground for concentricity
  • Much lighter than solid steel O.E. type pushrods
ARP 134-8701 Small Block Chevy Lightweight Fuel Pump Pushrod
SKU-1011348701
                        
These quality fuel pump pushrods from ARP are designed for used with Small Block Chevy engines only.  They feature heat treated chromoly steel construction.
  • For Small Block Chevy fuel pumps
  • Black oxide finish
  • Diameter: 1/2"
  • Overall length: 5-3/4"
  • Sold each