Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Moroso 21324 Circle Track Oil Pan w/ One Piece Rear Main Seal & Plug

SAME DAY SHIPPING! Order within the next 10 hours 33 minutes and receive same day shipping

Specs
Material Type:
Steel
Sold in Quantity:
Each
Finish:
Painted
Liquid Measurement:
7
Depth:
7.50
Dipstick Location:
Passenger Side
Inside Width:
11.00
MFG. Part #:
21324
Oil Inspection Plug:
Yes
Pan Style:
1-Piece Rear Main
Garage Sale:
No
Sump Style:
Wet Sump
Moroso 21324 Circle Track Oil Pan w/ One Piece Rear Main Seal & Plug
Moroso 21324 Circle Track Oil Pan w/ One Piece Rear Main Seal & Plug

Click image to enlarge

Speeday Motors Logo
X
Moroso 21324 Circle Track Oil Pan w/ One Piece Rear Main Seal & Plug

Details

Reviews

Q & A

What's in the Box

Now you can have a Moroso oil pan for an affordable price. It features trap doors for oil control, removable windage tray, built-in crank scraper and accepts up to 3.800" stroke with steel rods. It's 7-1/2" deep, 11" wide and fits 78-87 Metric chassis and Camaro stubs. Fits small block Chevy.

  • Cost-effective Circle Track oil pan with Moroso quality and performance
  • Trap door baffles for oil control
  • Removable louvered windage tray
  • Built–in crankscraper
  • Accepts 3.80" stroke with steel rods
  • Accepts most starter and flywheel combinations
  • Will not fit engine blocks with splayed main caps
  • Accepts most starter and flywheel combinations
  • Will not fit engine blocks with splayed main caps
  • Has a 7 quart capacity (not including oil filter)

You may also be interested in:

Moroso 20431 Big Block Chevy Conversion Oil Pan
                        

If you have ever tried to put a B/B chevy in a Tri-Five Chevy or Chevy II, you know there just isn't much room. This pan was designed to make the job a little easier. This pan has a 7 quart capacity (w/o filter) and accepts up to a 4-1/4" stroke with steel rods.

  • Pick-up 54524430 is required for installation
  • Notched rear sump clears steering linkage
  • Accepts strokes up to 4.250" with steel rods, 4.090" with aluminum rods
  • Compatible with most starter/flywheel combinations
  • 1/4" NPT Thread for dipstick assembly, suggested dipstick # 545-25971

Fits Mark IV style 396-454 (except Gen V and Gen VI) Big Block Chevy V-8s. For 1962-67 Chevy II (without power steering) and 1955-57 Chevys. Transmission MUST be in stock position.

Please see below for suggested oil pump pick-up.

Instructions (PDF)

Moroso 21316 Circle Track Oil Pan, 1955-79 w/ Driver Side Dipstick
                        

Now you can have a Moroso oil pan for an affordable price. It features trap doors for oil control, removable windage tray, built-in crank scraper and accepts up to 3.800" stroke with steel rods. It's 7-1/2" deep, 11" wide and fits 78-87 Metric chassis and Camaro stubs. Fits small block Chevy.

  • Cost-effective Circle Track oil pan with Moroso quality and performance
  • Trap door baffles for oil control
  • Removable louvered windage tray
  • Built–in crankscraper
  • Accepts 3.80" stroke with steel rods
  • Accepts most starter and flywheel combinations
  • Will not fit engine blocks with splayed main caps
  • Accepts most starter and flywheel combinations
  • Will not fit engine blocks with splayed main caps
  • Has a 7 quart capacity (not including oil filter)
Moroso 21317 Circle Track Oil Pan, 1980-85 w/ Pass. Side Dipstick
                        

Now you can have a Moroso oil pan for an affordable price. It features trap doors for oil control, removable windage tray, built-in crank scraper and accepts up to 3.800" stroke with steel rods. It's 7-1/2" deep, 11" wide and fits 78-87 Metric chassis and Camaro stubs. Fits small block Chevy.

  • Cost-effective Circle Track oil pan with Moroso quality and performance
  • Trap door baffles for oil control
  • Removable louvered windage tray
  • Built–in crankscraper
  • Accepts 3.80" stroke with steel rods
  • Accepts most starter and flywheel combinations
  • Will not fit engine blocks with splayed main caps
  • Accepts most starter and flywheel combinations
  • Will not fit engine blocks with splayed main caps
  • Has a 7 quart capacity (not including oil filter)
Moroso 21320 Circle Track Oil Pan, 1986-Up w/ One Piece Rear Main Seal
                        

Now you can have a Moroso oil pan for an affordable price. It features trap doors for oil control, removable windage tray, built-in crank scraper and accepts up to 3.800" stroke with steel rods. It's 7-1/2" deep, 11" wide and fits 78-87 Metric chassis and Camaro stubs. Fits small block Chevy.

  • Cost-effective Circle Track oil pan with Moroso quality and performance
  • Trap door baffles for oil control
  • Removable louvered windage tray
  • Built–in crankscraper
  • Accepts 3.80" stroke with steel rods
  • Accepts most starter and flywheel combinations
  • Will not fit engine blocks with splayed main caps
  • Accepts most starter and flywheel combinations
  • Will not fit engine blocks with splayed main caps
  • Has a 7 quart capacity (not including oil filter)
Moroso 20211 Chevy II 1955-1979 Small Block Oil Pan
                        

If you are lucky enough to be putting together a '62-'67 Chevy II, you know the oil pan is a little bit special. These Moroso pans take the pain out of the engine install while giving it a better oiling system. Has a 6 quart capacity (not including filter).

  • Pick-up 54524120 or 54524122 is required for installation
  • Wet Sump, 9" Deep
  • Clears 3.80" stroke with most steel rods
  • Notched sump clears steering linkage
  • Compatible with most starter/flywheel combinations
  • Reduces oil temperature

For cars without power steering. Pump pick-up NOT included but is available as noted below.

Moroso Oil Pan Instructions (PDF)

Moroso 21322 Oval Track Oil Pan, 1955-1979 Driver Side Dipstick
                        Now you can have a Moroso oil pan for an affordable price. It features trap doors for oil control, removable windage tray, built-in crank scraper and accepts up to 3.800" stroke with steel rods. It's 7-1/2" deep, 11" wide and fits 78-87 Metric chassis and Camaro stubs. Fits small block Chevy. Also has 1" Inspection plug.

Has a 7 quart capacity.
Moroso 21323 Circle Track Oil Pan, 1980-85 Pass. Side Dipstick w/ Plug
                        

Now you can have a Moroso oil pan for an affordable price. It features trap doors for oil control, removable windage tray, built-in crank scraper and accepts up to 3.800" stroke with steel rods. It's 7-1/2" deep, 11" wide and fits 78-87 Metric chassis and Camaro stubs. Fits small block Chevy.

  • Cost-effective Circle Track oil pan with Moroso quality and performance
  • Trap door baffles for oil control
  • Removable louvered windage tray
  • Built–in crankscraper
  • Accepts 3.80" stroke with steel rods
  • Accepts most starter and flywheel combinations
  • Will not fit engine blocks with splayed main caps
  • Accepts most starter and flywheel combinations
  • Will not fit engine blocks with splayed main caps
  • Has a 7 quart capacity (not including oil filter)
SuperSeal Small Block Chevy Oil Pan Gasket, 1986-Up One-Piece
                        

Small Block Chevy oil pan gasket by SuperSeal. 

  • 1986-Up one-piece
  • Approx 1/8" thick
  • Gray gasket w/ torque limiting washers
Moroso 24316 Pick-Up for Hi-Volume Pump
                        Pick-up for Hi-Volume pump
                    
Moroso 24317 Pick-Up for Standard Pump
                        Designed for use with Moroso oil pans, these steel pickups are  precision-bent and heliarc welded. A wire mesh steel screen, which is  welded to the pickup box, traps debris without restricting oil flow.  For high volume race pumps only.  Tube diameter is 0.625".