Call: 800.979.0122
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
x
Help Center

sales@speedwaymotors.com

Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Moroso 20212 Chevy II 1986-Up Small Block Oil Pan

SAME DAY SHIPPING! Order within the next 14 hours 52 minutes and receive same day shipping

Free Shipping Free Shipping
Specs
Material Type:
Steel
Sold in Quantity:
Each
Finish:
Zinc
Liquid Measurement:
6
Depth:
9.00
Dipstick Location:
Passenger Side
MFG. Part #:
20212
Oil Inspection Plug:
No
Pan Style:
1-Piece Rear Main
Garage Sale:
No
Sump Style:
Wet Sump
Moroso 20212 Chevy II 1986-Up Small Block Oil Pan
Moroso 20212 Chevy II 1986-Up Small Block Oil Pan
Moroso 20212 Chevy II 1986-Up Small Block Oil Pan

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

If you are lucky enough to be putting together a '62-'67 Chevy II, you know the oil pan is a little bit special. These Moroso pans take the pain out of the engine install while giving it a better oiling system. Has a 6 quart capacity (not including filter).

  • Pick-up 54524120 or 54524122 is required for installation
  • Wet Sump, 9" Deep
  • Clears 3.80" stroke with most steel rods
  • Notched sump clears steering linkage
  • Compatible with most starter/flywheel combinations
  • Reduces oil temperature

For cars without power steering. Pump pick-up NOT included but is available as noted below.

Moroso Oil Pan Instructions (PDF)

Item Details

Blocks with One-Piece Rear Main Seal

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Coach
Verified Purchaser
Richmond, Il

Moroso oil pan

May 09, 2015
Delivery super fast and correct great job guys !!!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

2 questions : 2 answers

1 answers

will this pan fit a 94 lt1 corvette engine? The engine is in my 67 Nova. The motor has passenger side dipstick. Wasnt for sure it said 86 and up but not for sure if Lt1 is included.

Lee
forsyth mo
July 15, 2011

will this pan fit a 94 lt1 corvette engine? The engine is in my 67 Nova. The motor has passenger side dipstick. Wasnt for sure it said 86 and up but not for sure if Lt1 is included.

Answers

July 18, 2011
John
This pan will fit the ’86 and up small block Chevy engines prior to the introduction of the LS series engines with one piece rear main and passenger side dipstick.
1 answers

Im wondering if this pan is right hand dipstick?

dthompson
Kansas
February 24, 2011

Im wondering if this pan is right hand dipstick?

Answers

February 25, 2011
Jeremy O
This pan uses a factory style block mounted press in dipstick.
Page 1 of 1

You may also be interested in:

Moroso 23900 Oil Accumulator, 3 Quart Capacity
(Part #54523900)
                        

This Moroso oil accumulator prevents intermittent loss of oil pressure that can occur under hard acceleration, severe cornering or hard braking. If oil pressure drops below optimum levels, an air-charged piston automatically forces up to 3 quarts of reserve oil to the main galleries.

The Accumulator is tapped to the pressure side of the engine’s oiling system. When the engine is running, oil pressure forces reserve oil into the accumulator and compresses the air ahead. When the danger is over and the pump is once again primed with oil, the oil pressure forces oil back into the Accumulator where it is ready for the next emergency. Moroso Accumulators can also be used to manually pre-lube engines before starting to prevent cold-start scuffing and premature bearing wear.

  • Three quarts of oil under pressure provide emergency supply instantaneously when needed
  • Air Pressure gauge verifies that Accumulator is ready for use
  • Cold start valve releases oil into cold engine for reduced wear
  • Tapped for 1/2" NPT fitting
  • Can be mounted in any position using Moroso Accumulator Mount Brackets

545-23900 Instructions (PDF)

Small Block Chevy Stock Volume Oil Pump
(Part #577OP55)
                        Stock volume oil pump for S/B Chevy. Pump is preset to 55-65 psi and uses a 5/8" diameter pick-up tube.
                    
Small Block Chevy High-Volume Oil Pump, 5/8 Pickup
(Part #577OP55HV)
                        

Thse high-volume oil pumps move 25% more volume than stock volume oil pumps. Pumps are preset to 55-65 psi. Fits Small Block Chevy.

Moroso 20211 Chevy II 1955-1979 Small Block Oil Pan
(Part #54520211)
                        

If you are lucky enough to be putting together a '62-'67 Chevy II, you know the oil pan is a little bit special. These Moroso pans take the pain out of the engine install while giving it a better oiling system. Has a 6 quart capacity (not including filter).

  • Pick-up 54524120 or 54524122 is required for installation
  • Wet Sump, 9" Deep
  • Clears 3.80" stroke with most steel rods
  • Notched sump clears steering linkage
  • Compatible with most starter/flywheel combinations
  • Reduces oil temperature

For cars without power steering. Pump pick-up NOT included but is available as noted below.

Moroso Oil Pan Instructions (PDF)

Pick-up for Stock S/B Oil Pump
(Part #54524120)
                        

Moroso Small Block Chevy extended oil pump pickups are engineered to be "where the oil is" under the most demanding racing conditions. Designed for use with Moroso oil pans, these steel pickups are precision-bent and heliarc welded. A wire mesh steel screen, which is welded to the pickup box, traps debris without restricting oil flow.

  • 9 inch oil pan depth
  • Press-fit
  • Features bolt-on support bracket 
  • Aftermarket pan style

 

Pick-up for HV S/B Oil Pump
(Part #54524122)
                        

Moroso extended oil pump pickups are engineered for Small Block Chevys to be "where the oil is" under the most demanding racing conditions. Designed for use with Moroso oil pans, these steel pickups are precision-bent and heliarc welded. A wire mesh steel screen, which is welded to the pickup box, traps debris without restricting oil flow.

  • 9 inch oil pan depth
  • Press-fit
  • Small Block Chevy
  • Aftermarket Pan Style
  • Features bolt-on support bracket