Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Moroso 63420 Manifold Filler Neck

Price:$61.99
63420 - Manifold Neck Filler Kit
Price:
$61.99
EA
In Stock
Item #:
54563420
Moroso 63420 Manifold Filler Neck
Click image to enlarge Click image to enlarge
No video at this time.
 

Makes manifold the highest filling point.  For cooling problems where radiator is mounted low. Fits both right or left applications. Sender mount. Fits GM V8, 90° V6.

  • Locates filler neck at highest point on cars with low-mount radiators to bleed off air
  • Unit can be flipped 180° for either right or left outlet location
  • Includes 1/2" NPT fitting for installing water temperature sending unit and two 1/4" NPT fittings for return lines on popular aftermarket cylinder heads
  • Made of 356-T6 cast aluminum; 3-1/4" high
  • Includes gaskets, bolts and washers, and standard size radiator cap filler neck
  • Cap is NOT included

 

  • 54563420
    Overall Height
    3.500" (3 1/2")
    Overall Length
    4.500" (4 1/2")
    Outside Diameter
    1.880"
    Hose ID
    1.550"
    Tube I.D.
    1.300"
    Tube Length
    1.500" (1 1/2")
    Filler Neck Height
    0.880"
    Thread Pitch
    3/8"-16
    Centerline of Holes
    3.250" (3 1/4")
    Material Type
    Aluminum
    Finish
    Natural
    Sold in Quantity
    Each
    Notes
    Has (1) 1/2" NPT fitting and (2) 1/4" NPT fittings. Filler neck has a 3/8" hose barb.
    Gasket(s) Included
    Yes
    Hardware Included
    Yes
    MFG. Part #
    63420
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
You May Also Be Interested In...
  • 180 Degree High Flow Thermostat
    180 Degree High Flow Thermostat
    (3 Ratings)
    Price: $12.99
    More Info
    180 Degree High Flow Thermostat
    x 
    							                        
    
                                                        
    Speedway takes a quality Robert Shaw high flow 180° thermostat, then modifies it to function properly in high RPM, high flow applications. They feature a balanced sleeve design and are strongly recommended for any performance application.  Fits most domestic applications.
    • 2-1/8" diameter 
    • High flow 180° thermostat
    • Balanced sleeve design
    • Recommended for any performance application
    • Fits most domestic applications
    Learn more about the importance of the thermostat with cooling systems and how they work by reading our tech article. Cooling System Principles.
  • Stant High Pressure Radiator Cap, 28-32 Lbs
    Stant High Pressure Radiator Cap, 28-32 Lbs
    (1 Rating)
    Price: $19.99
    More Info
    Stant High Pressure Radiator Cap, 28-32 Lbs
    x 
    							                        
    
                                                        
    Used by all the top NASCAR teams. The best high pressure radiator caps you can buy!
    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles. 
  • Speedway Manifold Filler Neck
    Speedway Manifold Filler Neck
    (1 Rating)
    Price: $37.99
    More Info
    Speedway Manifold Filler Neck
    x 
    							                        
    
                                                        
    This neck allows you to fill your cooling system at the intake manifold if you radiator is lower than the intake. It can be flipped over for RH or LH upper hoses, and has two 1/4" npt and one 1/2" npt hole in the back for bypass lines or sending units. Fill cap plate has a 7/16" pipe nipple welded into the overflow area.
    Fits Small Block or Big Block Chevy V8.
  • Speedway Straight Silicone Radiator Hose, 6 Inch Long
    Speedway Straight Silicone Radiator Hose, 6 Inch Long
    (1 Rating)
    Price: $9.99
    More Info
    Speedway Straight Silicone Radiator Hose, 6 Inch Long
    x 
    							                        
    
                                                        
    These 6" long silicone radiator/coolant hoses can be cut to length, allowing you to build just what you need. This 3 layer, reinforced silicone material exceeds SAE standards and is designed for todays high temp, high pressure cooling systems (-100ºF to +380ºF rated). 
    Choose hose diameter (I.D.) needed.
     
  • AFCO 80152-16 Billet Aluminum Radiator Cap
    AFCO 80152-16 Billet Aluminum Radiator Cap
    (3 Ratings)
    Price: $31.99
    More Info
    AFCO 80152-16 Billet Aluminum Radiator Cap
    x 
    							                        
    
                                                        
    This 16 lb. radiator cap is made of billet aluminum and fully polished.
    Learn more about cooling systems, how to choose the proper pressure cap, and how they work by reading our tech article. Cooling System Principles.