Model A to 1934 Ford 48 Inch I-Beam Axle Radius Rod Kit - Ford Spindle, Plain

							                        

                                                        
Apply Pro-Blend anti-seize directly to any metal surface that may gall or seize due to heat, pressure, torque loading or shock. Excellent in environments of gas, alcohol, water, solvents, dirt, sand, and grit.
Defies contact of dissimilar or like metals
Not affected by heat, moisture, salt water, or corrosion
Learn why using anti-seize is so important in our tech article, Installing New Hardware.
                                                    

						                        

							                        

                                                        
These Speedway spindles are a one piece, drop forged design constructed of high strength 4140 steel, which makes them superior to original components. These spindles are modeled after the '37-'41 round-back design and use '37-'41 Ford kingpins. They  fit Ford axles from '28-'48 and can be used with period correct drum brakes or modern Speedway Motors disc brakes, but will not work with hubs from '28-'36.
Uses 1937-1941 kingpin kit
For Ford axles 1928-1948
Will not work with 1928-1936 Hubs 
Be sure to include our kingpin kit (91032121) with these spindles. 
Spindles also available in kit form with Standard or Deluxe kingpins.
Spindle Identification Guide (GIF) 
910-32121 Instructions (PDF)
910-32122 Instructions (PDF)
                                                    

						                        

							                        

                                                        
Speedways Radius Rod Tube axle kits are designed to fit '28-'31 Model A and '32-'34 Ford frames. These tube axles require '37-'48 Ford passenger car spindles 
Each kit includes: 
48" kingpin-to-kingpin tube axle, 3" dropped
27" hairpin radius rods
Forged steel perch bolts
Forged steel lower shock mounts (key-slotted design)
Spring shackles w/ nylon bushings
31-1/4" eye-to-eye 6-leaf Super Glide spring, 1-3/4" wide
All hardware for assembly
 Front Axle/Suspension Tech Tips (GIF) 
                                                    

						                        

							                        

                                                        
Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, rubber brake lines, spindles, dust caps, spindle nuts, AN3 caliper fittings, kingpins, flat plate steering arms, tie rod assembly and hardware.  
For 46" kingpin-to-kingpin axles. 
Traditional steering arm for left front wheel NOT included with Traditional steering kit.
Ford kit features:
Mr. Roadster 1928-48 Ford Spindles 
One piece forged 4140 steel 
Modeled after the 1937-41 round-back design 
Standard king pins fit to spindles
Speedway 11" Brake Kit 
11" vented iron rotor, 1" thick  
5 x 4-1/2" or 5 x 4-3/4" bolt patterns
Wheel studs - 1/2" Fine (4-1/2" BP), 7/16" Fine (4-3/4" BP) 
Hub flange (hat) diameter - 6-1/4" 
GM Metric '78-'88 calipers, 2-1/2" piston
7/16" banjo bolt to AN-3 line adapter kit 
Traditional or Cross Steering Kit 
Flat plate steering arms
5/8" tie rod steering link
5/8" standard heim joint rod ends
Seals-it 5/8" rod end seals
Spindle Identification Guide (GIF)
                                                    

						                        

							                        

                                                        
Now you can dress up your '28-'48 Ford front axle with these chrome forged 4140 steel spindles. They come complete with bushings installed and '37-'41 style kingpins fitted. 
Superior strength compared to original spindles
Modeled after the '37-'41 round-back design
Uses '37-'41 Ford kingpins
For Ford axles '28-'48
Will not work with '28-'36 hubs
Complete with kingpin kit
Bushings fitted to pin and installed 
Don't forget to include our spindle nut kit (910616004) with these spindles. 
Note: Not to be used with disc brake kits 91031942 or 91631903 as these kits require modification to the spindle which is not recommended for chrome spindles. 
Spindle Identification Guide (GIF)
                                                    

						                        

							                        

                                                        
Split bones front end kit for '37-'48 Ford style spindles. Kit is based on our 910-35140.
Kit Includes:
Wishbone style radius rods
Radius rod frame mounts
29” leaf spring
Shackles
Perches
Lower shock mounts
Hardware
                                                    

						                        

							                        

                                                        
Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.
Features these Wilwood components:
4-piston Forged Billet Dynalite Calipers
10-3/4" diameter x .38" thick solid steel rotors - black finish
Lightweight clear-anodized aluminum hubs
Choose:
Traditional or cross steering
Chrome or plain steering arms and tie rod cross bar  
Traditional steering arm for left front wheel NOT included with kit. 
                                                    

						                        

							                        

                                                        
Speedway Radius Rod I-Beam axle kits are designed to fit '28-'31 Model A and '32-'34 Ford frames. I-Beam axles require '37-'48 Ford passenger car spindles. Kits are available in Plain steel or Chrome.
Each kit includes: 
48" kingpin-to-kingpin I-beam axle, 4" dropped
27" hairpin radius rods
Forged steel perch bolts
Forged steel lower shock mounts (key-slotted design)
Spring shackles w/ nylon bushings
31-1/4" eye-to-eye 4-leaf Super Glide spring, 1-3/4" wide
All hardware for assembly
Front Axle/Suspension Tech Tips (GIF)