Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Mild Steel Exhaust Bend Kit, 2-1/2 Inch

Specs
Material Type:
Steel
Sold in Quantity:
Kit
Finish:
Natural
Tube O.D.:
2.50
Hardware Included:
No
Wall Thickness:
.06
Mandrel Bent:
Yes
Garage Sale:
No
Notes
Includes 4 each: 45* bends, 90* bends, 180* bends, and 48" lengths. No clamps or hangers are included.
Mild Steel Exhaust Bend Kit, 2-1/2 Inch

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately. Natural, uncoated finish. Not aluminized.

  • Four 48" Straight Pipes
  • Four 90 Degree Pipes
  • Four 45 Degree Pipes 
  • Four 180 Degree U-Bends

Customer Reviews

Rated 4.7 out of 5 by 32 reviewers.
RATING BREAKDOWN
32 reviews
5 Stars
24
4 Stars
7
3 Stars
0
2 Stars
0
1 Star
1
RECOMMEND THIS PRODUCT:

chris88
Verified Purchaser
Amarillo, TX, USA
Product Rating

great product!

January 27, 2015
Ordered this kit and was very happy with product, price, and shipping speed. Very good quality would definitely buy again! !
Pros:
  • shipping speed
  • Price
  • Quality
Cons:
  • None
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

cuttinup
Verified Purchaser
texas
Product Rating

exactly as listed

October 14, 2014
Ordered the kit to build a 2 1/2 system for my Model A. Got just what I wanted. Good quality.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

csones
Verified Purchaser
Kansas, USA
Product Rating

good kit for a low price

July 18, 2014
easy to install kit, works great, low price. will order another for next vehicle.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Gdub
texas
Product Rating

Good value

September 29, 2013
I bought this kit to build the exhaust on my panel truck. It had plenty of each type of bend to do everything I needed and have quite a bit left over. I'm very pleased with it.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Cobrabird55
Verified Purchaser
Titusville, FL, USA
Product Rating

Very nice quality, very low price.

January 26, 2013
Have not built the exhaust system yet, so I can not advise as to the weldability of the product, but the visual quality is excellent. Buying the kit was far less expensive than buying the individual pieces and I will have several sections left over for the next project.. Way to go guys!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

morgantj
Verified Purchaser
Louisville Ky.
Product Rating

I would buy product again

September 18, 2012
This is all you need to make a new exhaust from scratch if you are making you own.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Jeff
Verified Purchaser
WI
Product Rating

Good Quailty Pipe

July 07, 2012
I needed to shape my head pipe for clearance issues with the pan comming off the block hugger headers. It will not crack when shaped cold like other pipe I have used.
Pros:
  • Heavy gage steel
  • Nice smooth bends
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Pat
Okawville Illinois
Product Rating

nice kit priced right

May 18, 2012
Used on My 63 falcon. Took a little time in planning but worked perfectly. I'm glad that you did not come with a bunch of cramps that I wouldn't use anyway.
Pros:
  • As always super fast shup
  • Nice fit universal kit
  • No clamps keeps price low
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Mad Mike
Verified Purchaser
Marquette, MI
Product Rating

Puts the speed in Speedway!

February 02, 2012
The product arrived fast, allowing me to get my project(a daily driver) back on the road! The metel was of good quality and I had no problems with fitment, or welding it! I was super impressed with my whole experience with Speedway Motors.
Pros:
  • Fast delivery
  • Easy To Install
  • Great customer support
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Fallguy
Verified Purchaser
Franklin Tennessee
Product Rating

Best thing out there!!

November 23, 2010
Building an exhaust for my LT1 S10. This is going to be fun!!
Pros:
  • Great Value
  • COULDN'T GET ANY BETTER
  • Lots of pros
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 4
91013824

Product Q&A

7 questions : 11 answers

2 answers

What is the tubing center line bend radius of the included bends?

51Daddy
Portland, OR, USA
October 13, 2014

What is the tubing center line bend radius of the included bends?

Answers

October 15, 2014
cuttinup
The U bends are a 4" Radius
October 14, 2014
EricM
The mandrel bends in this kit have a 4" center line radius.
1 answers

What other parts are required? I'm looking to build true dual H pipes for my '79 F-350, auto, single cab 4x4 with side pipes exiting in front of rear wheels - everything from behind the headers/manifold. Hardware and hangers aside, what else will I need? Just mufflers, flanges @ the headers/manifold and flanges for in front of the mufflers somewhere (for disassembly)?

CharlieG
Pennsylvania, USA
November 21, 2013

What other parts are required? I'm looking to build true dual H pipes for my '79 F-350, auto, single cab 4x4 with side pipes exiting in front of rear wheels - everything from behind the headers/manifold. Hardware and hangers aside, what else will I need? Just mufflers, flanges @ the headers/manifold and flanges for in front of the mufflers somewhere (for disassembly)?

Answers

November 21, 2013
EricM
Each installation is a little different but your list of extras seems to be fairly complete. Depending on how removable you want it and the exact placement consider adding flanges for a remove H pipe as well.
1 answers

3 Inch kit Would like to know if you make a Mild Steel Exhaust Bend Kit in 3 inch? thanks, Bob.

IROCBOB86
New York State
October 29, 2012

3 Inch kit Would like to know if you make a Mild Steel Exhaust Bend Kit in 3 inch? thanks, Bob.

Answers

October 30, 2012
Jason
Sorry, at this time we only offer this kit in 2-1/4" and 2-1/2". You may check with Dynatech for availability on a 3" kit
3 answers

Are the fittings mandrel bends ?

John
Cecil Pa.
September 30, 2011

Are the fittings mandrel bends ?

Answers

June 07, 2013
Jake99
yes.
January 17, 2012
nice442
Yes - nice smooth bends, unlike the average muffler shop bend.
September 30, 2011
Jason
This exhaust kit features mandrell bends and it is made from hi-grade steel tubing with a wall-thickness of app .060". The tubing is raw steel, NOT aluminized.
1 answers

What dimensions are the exhaust tubing?

Eric
NY
July 10, 2011

What dimensions are the exhaust tubing?

Answers

July 11, 2011
QC
2.5 OD 2 3/8 ID 48 inches long for the long straight parts This exhaust kit features mandrell bends and it is made from hi-grade steel tubing with a wall-thickness of app .060". The tubing is raw steel, NOT aluminized.
2 answers

Is the mild steel tubing aluminized? Are these mandrel bends?

Moneypit
Arlington, TX
March 09, 2011

Is the mild steel tubing aluminized? Are these mandrel bends?

Answers

June 07, 2013
Jake99
Not aluminized, yes, mandrel bends.
March 23, 2011
Waymon
Yes these are mandrel bends, but they are not aluminized.
1 answers

I was just wondering what gauge this pipe is?

Ty
February 21, 2011

I was just wondering what gauge this pipe is?

Answers

February 25, 2011
Waymon
This kit consists of 16 gauge steel tubing.
Page 1 of 1

You may also be interested in:

Header Reducer Kit, 2-1/2 to 2 Inch
(Part #91013751)
                        Each mild steel reducer comes with a welded-on 3-bolt flange, gaskets and bolts.
                    
Stainless Steel Exhaust/Muffler Tube Clamps
(Part #91013001)
                        

These superior quality muffler tube clamps/u-bolts are 100% stainless steel. They are ideal for any exhaust system and feature a saddle-type clamp for added strength. Choose plain or polished. Choose from 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8", 2-1/4", and 2-1/2" sizes available. Thread size on tube clamps is 8mm-1.25.

  • Stainless steel
  • Ideal for any exhaust system 
  • Saddle-type clamp for added strength
  • Thread size on clamps is 8mm-1.25
  • Choose plain or polished
  • Choose from 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8", 2-1/4", and 2-1/2" pipe diameter
Stainless Steel Exhaust Bend Kit, 2-1/2 Inch
(Part #91013828)
                        

Sometimes it's just easier to do it yourself than have someone else screw it up for you. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation. Clamps sold separately. Natural, uncoated finish.

  • Four 48" Straight Pipes
  • Four 90° Pipes
  • Four 45° Pipes 
  • Four 180° U-Bends
Dynatech® 789-70250 Stepped Band Tube Clamp, 2-1/2 Inch
(Part #31178970250)
                        

Smooth transition taper allows proper fit to seal expanded slip-fit connections. Great for muffler, tailpipe, merge pipe connections.

One clamp per package.

Mild Steel Exhaust Bend, 45 Degree, 2-1/2 Inch
(Part #91013879)
                        

Each pipe is expanded on one end to allow easy installation. 16-gauge mild steel. Natural, uncoated finish. Not Aluminized.

Mild Steel Exhaust Bend, 90 Degree, 2-1/2 Inch
(Part #91013880)
                        

Each pipe is expanded on one end to allow easy installation. 16-gauge mild steel. Natura, uncoated finish. Not aluminized.

Mild Steel Exhaust Bend, 180 Degree, 2-1/2 Inch
(Part #91013881)
                        
  • Each pipe is expanded on one end to allow easy installation
  • 16-gauge mild steel
  • Natural, uncoated finish
  • Not aluminized
Mild Steel 48 Inch Exhaust Tubing Length, 2-1/2 Inch
(Part #91013882)
                        

Each pipe is expanded on one end to allow easy installation. 16-gauge mild steel. Natural, uncoated finish. Not Aluminized.