Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

6.5 Inch Pedal Car Tire

SAME DAY SHIPPING! Order within the next 16 hours 37 minutes and receive same day shipping

Specs
Material Type:
Rubber
Color:
Black
Sold in Quantity:
Each
Overall Thickness:
0.79
Finish:
Natural
Overall Diameter:
7.00
Inside Diameter:
5.75
Garage Sale:
No
Outside Diameter:
7.00
6.5 Inch Pedal Car Tire

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

6.5 Inch Flat or Round Profile Pedal Car Tire

Choose between flat or round.

Select the link below to view all parts for your pedal car.

Please refer to application tab to double check part fitment.  

Parts shown in the exploded view but not listed are currently not available. Sorry!

Murray Three-Wheeler Illustration 

Garton Kidillac Illustration 

Exploded Parts View for Murray Boat (Link)

Exploded Parts View for Murray Dip Side/ Full Side (Link)

Exploded Parts View for Murray Three-Wheeler (Link)

Exploded Parts View for Murray Flat Face (Link)

Exploded Parts View for Murray Tot Rod (Link)

Exploded Parts Diagram for Murray Sad Face (Link)

Exploded Parts View for Murray Pontiac (Link)

Exploded Parts Diagram for Murray V-Front/Tooth Grille (Link)

Exploded Parts View for Murray Comet/Torpedo (Link)

Exploded Parts View for Murray Atomic Missile (Link)

Exploded Parts View of AMF Mustang (Link)

Exploded Parts View for AMF/BMC Truck (Link)

Exploded Parts View for AMF Generic (Link)

Exploded Parts View for AMF 508-519 Firefighter (Link)

Exploded Parts View for AMF/BMC Fish Mouth/Star Grille (Link)

Exploded Parts View for Garton Kidillac (Link)

Exploded Parts View for Garton Mark V (Link)

Exploded Parts View for Garton Hot Rod (Link)

Exploded Parts View for Garton Tin Lizzy (Link)

Exploded Parts View for Garton Casey Jones (Link)

Exploded Parts View for Garton Jeep (Link)

Exploded Parts View for Steelcraft 1941 Chrysler (Link)

Exploded Parts View for Steelcraft Chrysler Airflow (Link)

Exploded Parts View for Steelcraft Pursuit Plane (Link)

Exploded Parts View for Steelcraft Lincoln Zephyr (Link)

Exploded Parts View for BMC Racer (Link)

Exploded Parts View for Hamilton Jeep (Link)

Exploded Parts View for Midwest Industries Studebaker (Link)

 

Application

Applicable to:

  • Murray Boat
  • Murray Dip Side/ Full Side
  • Murray Three-Wheeler
  • Murray Flat Face
  • Murray Tot Rod 
  • Murray Sad Face
  • Murray Pontiac 
  • Murray V-Front/Tooth Grille
  • Murray Comet/Torpedo
  • Murray Atomic Missile
  • AMF Mustang
  • AMF/BMC Truck
  • AMF Generic
  • AMF 508-519 Firefighter
  • AMF/BMC Fish Mouth/Star Grille
  • Garton Kidillac
  • Garton Mark V
  • Garton Hot Rod
  • Garton Tin Lizzy
  • Garton Casey Jones
  • Garton Jeep
  • Steelcraft 1941 Chrysler
  • Steelcraft Chrysler Airflow
  • Steelcraft Pursuit Plane
  • Steelcraft Lincoln Zephyr
  • BMC Racer
  • Hamilton Jeep
  • Midwest Industries Studebaker

Item Details

Also part number 9180-0413,-3813,-3815,-0813,-1213, -0613,-0615,-0612,-1015,-0215,-5013,-5015,-5031,-3215, -4213,-4215,-3415,-2415,-5413

Customer Reviews

Rated 4.9 out of 5 by 7 reviewers.
RATING BREAKDOWN
7 reviews
5 Stars
6
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Philly
Lorain,ohio
Product Rating

Great purchase. Good fitting product.

August 15, 2012
Easier to mount than expected. Took a little muscle but didn't have to heat the tire like some others.
Pros:
  • Well Made
  • Quality Materials
  • Easy to mount Nice Rubbe
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

lon
colorado springs
Product Rating

Tires

July 02, 2010
[...], first ordered based on wheel diameter, but they were too small. ordered replacement outside diameter and they arrived in one day. wish they had catalogs available.
Pros:
  • Tires fit great
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

rg carman
Verified Purchaser
N.Y.
Product Rating

well made tire

November 20, 2011
one piece formed,nice fit
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Catrin
Verified Purchaser
Product Rating

Great Seller!!

July 20, 2014
Received prompt service, great prices, and speedy shipping.
Pros:
  • great service! product exactly as described
Cons:
  • None
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

mark1958
Verified Purchaser
Product Rating

just what I was looking for!

March 07, 2014
My order was just what I was looking for. Good price and shipped on time. Very pleased!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

19chuck34
Verified Purchaser
Product Rating

Firetruck back in action

March 27, 2015
It was a real fight to break the nuts lose on the front axles of my pedalcar firetruck. Then it was even tougher to slide the front wheels off the axles. I finally got the wheels off to wirebrush the surfaces and spray on heavy coats of Rustoleum red rusty primer and a few coats of red finish. I boiled the new tires in a pan for about ten minutes and they stretched right into place on the fresh wheels. They look great and fit perfectly. I will replace the rear tires next.
Pros:
  • Perfect Fit
Cons:
  • None
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Gary
Verified Purchaser
Verified Reviewer
Tulsa, Oklahoma
Product Rating

Pedal Car

May 16, 2015
Well I bought tires, decals, pedals, bell, light, and other things. Speedway was very good to tell me exactly how to put them on. They were just great I thought!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1
91800815

Product Q&A

10 questions : 10 answers

1 answers

If I take a picture of my car can someone identify it and tell me a little about it? What accessories go with this?

gusp
Pittsburgh, PA, USA
February 23, 2014

If I take a picture of my car can someone identify it and tell me a little about it? What accessories go with this?

Answers

February 24, 2014
EricM
This tire is meant to be installed on a 6.5" wheel. If you would like to send us some pictures of your pedal car we will assist in any way we can to help identify it. Send us an email with your pictures to sales@SpeedwayMotors.com and one of our Blue Diamond pedal car specialists will be happy to help.
1 answers

What would an AMF firetruck use? I can't tell if the old ones are flat or round.

Gigi
Pasadena, CA, USA
November 25, 2012

What would an AMF firetruck use? I can't tell if the old ones are flat or round.

Answers

November 26, 2012
Jason
The original ones would be flat.
1 answers

HOW DO YOU MOUNT THE TIRE ON THE WHEEL

sadface
November 11, 2012

HOW DO YOU MOUNT THE TIRE ON THE WHEEL

Answers

November 12, 2012
Jason
This type of tire is pretty easy to install. Obviously, you need to remove the old tire first. I recommend that you simply take a large side cutter (a pair of “dykes”) and snip the rubber in 2. Some installations will have a piece of wire embedded inside. The wire will also need to be cut to remove the old tire. Now, clean up/straighten/repaint the wheel as you see fit. Finally, heat the new tire to make it softer and more “stretchy”. I suggest that you preheat your kitchen oven to 250-275 degrees and place the tire(s) in the oven on a cookie sheet for about 10 minutes. When you take the tire out of the oven (you may want to wear gloves because it will be HOT!), quickly “stretch” the tire as if you were making a pizza pie and then set the tire into the groove on one side of the wheel. Grip the wheel & tire with the fingers of both hands and use your 2 thumbs to push and roll the other side of the tire over the wheel lip and into the wheel groove. With the tire on the wheel, check to make sure it is centered in the tire groove and the tire “lines” (tread pattern) are straight. When the tire cools it will shrink slightly and become firm again. When the tire reaches room temperature you are ready to roll! Please consider this information and let us know if you wish to place an order or if you have additional questions.
1 answers

I have a midwest sportster , need tires, a hub cap, midwest graphics,a seat, also need to know what color paint was used ,can you help me. Thanks

buddy
decatur, alabama
August 03, 2011

I have a midwest sportster , need tires, a hub cap, midwest graphics,a seat, also need to know what color paint was used ,can you help me. Thanks

Answers

August 04, 2011
Ken
Thanks for your interest in our product line! If you go to our website (www.speedwaymotors.com) and input “Midwest industries” in the Search box at the top of the page you can click on the image that shows the Gold-colored car (which should be towards the bottom of the page). This will bring up the listing of components we offer for your car. This will include the tires, hubcaps, seat cover and graphics. As for paint color, we have never found any factory-original paint code formulas. We do not offer paint for pedal cars. Our suggestion is to have an automotive paint shop match a part of your car that was protected from the elements (usually on the underside, where 2 components might’ve been bolted together since new). Alternately, you can look through a “paint chip” book at an auto body supply store. You can choose whatever color you feel best approximates the color of your original car. As a hint, Fleet Colors tend to be non-metallic hues (most pedal cars were not painted with metallic colors) and are usually grouped in such a way that they will gradually go from blue-to-green-to-yellow…etc. and will make it easier to choose the color you like best. Please consider this information and let us know if you wish to place an order or if you need further assistance.
1 answers

Hi, Where can information be found about the correct color paints for the Kidillac cars. Do you offer these? Thanks

Jeff
Pensacola
April 04, 2011

Hi, Where can information be found about the correct color paints for the Kidillac cars. Do you offer these? Thanks

Answers

April 05, 2011
Tech Support
We have searched the world over for the correct paint codes for the vintage pedal cars with absolutely NO luck! There seems to be no surviving records for any of them. Your best course of action is to find some part of the car with a remnant of the original paint color (usually on the underside of the car, perhaps where 2 pieces were bolted together and thus protected from the sun and other elements) and have the color matched by a supplier of auto body materials. Short of that you might look in a paint chip book for Fleet Colors (which usually did not have the metallic hues common to full-size automobiles) and find a tone that you feel is suitable.
1 answers

what measurement should be taken to determine what size tire to order... Do you measure the tire all the way around or do you measure it across? Thanks Eric

Eric
Sandwich, IL
November 21, 2011

what measurement should be taken to determine what size tire to order... Do you measure the tire all the way around or do you measure it across? Thanks Eric

Answers

November 22, 2011
Ken
Hello, Thanks for your interest in our product line! Remember, wheels are metal and tires are rubber. To measure the diameter of a circle you need to start at one edge and measure going directly across the center of the circle to the opposite side of the circle. To determine the suitability of a pedal car tire we need to know 2 dimensions: the outside diameter of the METAL part of the wheel, and the width of the “slot” or “groove” where the tire fits into the wheel. So for example, a 6.5” tire (such as our 918-00815) will fit on a wheel that is 6.25” to 6.5” in diameter and which has a width of about 5/8”. A 7.5” tire (such as our 918-05215) will fit a wheel that is 7.25” to 7.5” diameter and a width of about 5/8”. I hope this answers your question. If you need further input, or your wheel has significantly different measurements, please feel free to contact us again. We will be happy to assist your pedal car parts search! Thank you for choosing Blue Diamond Classics®! A Division of Speedway Motors Inc.
1 answers

I have a 1960s Murray V-front and I have no idea of the tire part #. can you please supply this or tire size?

August 24, 2011

I have a 1960s Murray V-front and I have no idea of the tire part #. can you please supply this or tire size?

Answers

August 26, 2011
Ken
A 1960s-era Murray V-front would originally have had a tire like the 918-00815-FLAT. This tire will fit on a wheel that measures approximately 6.5” outside diameter (that is the METAL part of the wheel, not counting the original tire). Thank you for choosing Blue Diamond Classics!
1 answers

My rim measures six and a quarter inches. Will the tire fit on that size rim?

scotty
Slidell, La
September 17, 2011

My rim measures six and a quarter inches. Will the tire fit on that size rim?

Answers

September 20, 2011
Ken
You’re in luck! The tire you mention is intended for a wheel that measures from 6.25” to 6.5” outside diameter. Thank you for choosing Blue Diamond Classics!
1 answers

how do you getold rubber off? AND HOW DO YOU PUT NEW ON?

COLDWATER MI
July 16, 2011

how do you getold rubber off? AND HOW DO YOU PUT NEW ON?

Answers

July 19, 2011
Ken
This type of tire is pretty easy to install. Obviously, you need to remove the old tire first. I recommend that you simply take a large side cutter (a pair of “dykes”) and snip the rubber in 2. Some installations will have a piece of wire embedded inside. The wire will also need to be cut to remove the old tire. Now, clean up/straighten/repaint the wheel as you see fit. Finally, heat the new tire to make it softer and more “stretchy”. I suggest that you preheat your kitchen oven to 250-275 degrees and place the tire(s) in the oven on a cookie sheet for about 10 minutes. When you take the tire out of the oven (you may want to wear gloves because it will be HOT!), quickly “stretch” the tire as if you were making a pizza pie and then set the tire into the groove on one side of the wheel. Grip the wheel & tire with the fingers of both hands and use your 2 thumbs to push and roll the other side of the tire over the wheel lip and into the wheel groove. With the tire on the wheel, check to make sure it is centered in the tire groove and the tire “lines” (tread pattern) are straight. When the tire cools it will shrink slightly and become firm again. When the tire reaches room temperature you are ready to roll! Please consider this information and let us know if you wish to place an order or if you have additional questions.
1 answers

I have a Murray flat face with 6 1/4 wheels. How do I know if the tires needed should be flat or round?

Malibu Tom
Detroit, Mi.
December 02, 2011

I have a Murray flat face with 6 1/4 wheels. How do I know if the tires needed should be flat or round?

Answers

December 05, 2011
Ken
Hello, Thanks for your interest in our product line! Either style (flat or round) will fit and work just fine on your 6 ¼” wheels. Most toy makers used the round profile tires up to about 1955, and switched to the flat profile tires after that. The flat face cars began in 1958, so they would originally have had the flat profile tires. Many people use the round profile tires on models newer than 1955 as they feel those are somewhat easier to install. Only on certain, very collectible models do aficionados feel that to be improper (such as the Mustang pedal car). Please feel free to place your order or contact us again if you need further information. Thank you for choosing Blue Diamond Classics®! A Division of Speedway Motors Inc.
Page 1 of 1