Male Aluminum Quick Release End
Click image to enlarge
Q & A
What's in the Box
- 10-32 RH stud
- Includes 1/4" steel and 10-32 aluminum ball
- 1" UHL
This product has no reviews.
No questions have been asked.
You may also be interested in:
Aluminum Heim Joint Rod Ends, 3/16 Inch (10-32) LH MalePrice: $7.99More InfoCompare
Swedged Aluminum Throttle Linkage Tubes, 3/16 Inch (10-32) ThreadMore InfoCompare
Speedway Steel 3/16 Inch LH Male Throttle Linkage Rod Ends with StudMore InfoCompare
Aluminum rod ends are a close tolerance, 3-piece, medium duty design. Hard anodized 7075-T6 aerospace quality aluminum body. Heat treated, 5210 precision ground ball, Kevlar race. Self lubricating Teflon liner seals out dirt and debris.
Applications: Designed for motorsports application where weight is critical. All of the strength & features of the Precision rod ends at half of the weight.
Assembly Tip: To ease assembly, be sure to run a tap or die through the threads on chrome plated fasteners and apply an anti-seize compound to prevent galling of the threads.
Aluminum Rod Ends Chart (GIF)
This swedged throttle linkage tubing is tapped 3/16" (10-32) LH and RH thread. One end of the throttle rod will have left hand threads, and the other end will have right hand threads. Made of 5/16" x 0.049 round aluminum tubing.
Note: When measuring for your tube length, you will want to allow 1.5" in length for the rod ends (3/4" of length for each end when calculating your eye-to-eye measurement. For instance, an eye-to-eye length of 11.5" would require a 10" swedged tube.
These 3/16" rod ends can be used to create a trick throttle linkage system when combined with our swedged aluminum tubing.
Use with swedged aluminum throttle tube.
Item Details3/16" stud/thread