Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

MSD 5098 DynaForce Mopar Starter, 318-440

SAME DAY SHIPPING! Order within the next 1 hour 7 minutes and receive same day shipping

Specs
MFG. Part #:
5098
MSD 5098 DynaForce Mopar Starter, 318-440
MSD 5098 DynaForce Mopar Starter, 318-440

Click image to enlarge



Details

Reviews

Q & A

What's in the Box

The new DynaForce Starter is designed to crank over the highest compression engines on a hot day in Death Valley. Not that too many race cars are sitting in Death Valley, but it’s good to know that you have the oomph to make it happen. The DynaForce Starter features all new components beginning with a three horsepower motor. This power is used to crank over the reduced 4.4:1 gear set to deliver great torque to the engine’s ring gear to get the engine turning. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement and thousands of starts. The downsized housing clears most headers and oil pans. The assembly is powder coated MSD red and will stay looking good, even though it’s underneath your car.

The Chrysler version is a compact replacement for everything from small blocks to 440 engines.

  • Gear reduction of 4.4:1 
  • 3 horsepower motor 
  • Ball bearing supported armature and pinion gear
  • Downsized design helps clearance issues with oil pans and exhaust

547-5098 Instructions (pdf)

MSD Rebate (Link)

You may also be interested in:

Moroso 62520 Mopar Solid Motor Mounts
(Part #54562520)
                        These Chrysler solid motor mounts fits Mopar V8, replaces OEM 2536121.
                    
Powermaster 9300 1965-1987 Mopar V8 Gear Reduction Starter
(Part #91067482)
                        

This PowerMAX Series high-torque gear reduction starter clears all headers and oil pans where original equipment starters won't. Also has no heat soak problems. 4.4:1 reduction ratio, 160 ft. lbs. of torque.

  • Bolt-On Replacement for Early Chrysler Starter
  • 4.4:1 Gear Reduction Ratio
  • Dyno Test Results Included
  • Weight 8.5 lbs.
  • Adjustable mounting block
  • Recommended for 10:1 Compression
  • Clears MOST headers
  • Works with most oversize kickout oil pans

Fits most 1965-1987 Chrysler, Dodge, & Plymouth S/B and B/B engines.

910-67482 Instructions (PDF)

Mopar Engine Mid Plate, 3/8 Inch Offset
(Part #91711669)
                        

Mopar engine mid plates. Fits most popular IMCA modified using Small Block Mopar. Aluminum.


Quick Time RM-6072 Small Block Mopar 318-360 Steel Bellhousing
(Part #91027020)
                        

These strong, lightweight steel bellhousings are just the ticket for installing a Mopar 3 or 4 speed manual transmission behind your favorite V8 engine. We're now offering them for small block 318-360 Mopars.

The compact design allows the bellhousings to fit in tight quarters and most will accommodate up to a 10-1/2" clutch. Set up to use an original style clutch fork and release bearing, but can also be used with hydraulic release bearings.  

  • Height = 7.400"
  • Trans. Bore Ø = Universal 4.807/5.125
  • Engine = Mopar 318/360
  • Trans. = 3-4 speed Mopar
  • Clutch Ø = 10.5"
  • Flywheel = 130 tooth
  • Weight = 22#
  • Fork bracket, full engine plate, and grade 8 bolts included

 

Book - How to Build Big-Inch Mopar Small Blocks
(Part #91085275)
                        This engine building book shows you how to get big-cube power in your Mopar small-block, and then shows you how to optimize the engine's induction, heads, valvetrain, ignition, exhaust, & more.
                    
Edelbrock 2915 Victor Small Block Mopar Intake Manifold
(Part #3252915)
                        

Edelbrock's Victor 340 is designed for 340-360 c.i.d. Chryslers using standard rectangular-port heads. For oval track and drag race engines operating from 3500-8000 rpm. Can be used on 318 c.i.d. engines with 340-360 heads. Will not fit 1992 and later Magnum engines.

IMCA Approved

Victor Mopar Intake Manifold Installation Instructions (PDF)

Quick Time RM-6070 Adapter Bellhousing, Mopar 318/360 to Muncie Trans
(Part #9106070)
                        

These durable bellhousings are perfect for mating your custom built engine and transmission.  They are designed to fit small block Mopar engines to Muncie/Jerico style transmissions. They are built from high grade steel with over 80,000 PSI strength, which is over two times the strength of any other steel bellhousing.

  • Fits Engine: Mopar 318 / 360
  • Fits Transmission: Muncie / Richmond / Falcon / Bert / Jerico 4-5 speed / Brinn / Saginaw / Chevy TKO 500-600 / BW-T10
  • Transmission bore diameter: 4.685"
  • Flywheel: 130 tooth
  • Weight: 22lbs
  • Clutch: 10.5"
  • SFI: 6.1
  • Included hardware:
    • Fork bracket
    • Full engine plate and grade 8 bolts

9106070 Mopar to Muncie Bellhousing Instructions (PDF)

MSD 50981 DynaForce Starter, Chrysler 318-440 Engines
(Part #54750981)
                        Our new DynaForce Starter is designed to crank over the highest compression engines on a hot day in Death Valley. Not that too many race cars are sitting in Death Valley, but its good to know that you have the oomph to make it happen. The DynaForce Starter features all new components beginning with a three horsepower motor. This power is used to crank over the reduced 4.4:1 gear set to deliver great torque to the engines ring gear to get the engine turning. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement and thousands of starts. The downsized housing clears most headers and oil pans. The assembly is powder coated MSD red and will stay looking good, even though its underneath your car.
  • Gear reduction of 4.4:1 improves torque for great cranking
  • Three horsepower motor provides power for high compression engines
  • Ball bearing supported armature and pinion gear
  • Downsized design helps clearance issues with oil pans and exhaust
MSD 8534 Chrysler 318, 360 Billet Distributor
(Part #5478534)
                        Remove the MSD cap and Race Rotor and youll find easy access to the adjustable mechanical advance assembly. This advance is designed for accuracy and strength with TIG-welded weight pins, nylon pads for smooth movement of the weights and a QPQ coating for friction reduction. Different advance springs and stop bushings are supplied so you can custom tailor a timing curve to fit your Chryslers needs. Supporting the advance assembly is a hardened, polished steel shaft. Two ball bearing guides are used to support the shaft producing incredible stability. Precision paddles of a zinc-plated reluctor pass a maintenance-free magnetic pick-up creating a trigger signal that tells the MSD to fire.

Installation Instructions (PDF)

  • CNC machined billet aluminum housing and Dupont Rynite base
  • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range
  • Polished steel shaft is QPQ coated and guided by two sealed ball bearings
  • Advance plate and weights are fine blanked from chrome moly steel and QPQ coated for friction reduction
  • Mechanical advance assembly can be locked out for crank trigger systems
  • Advance weight pins are staked and tig welded to the plate
  • Nylon pads ensure smooth operation of the advance weights
  • Supplied with an HEI style distributor cap and rotor (accepts Cap-A-Dapts)
  • Must be used with an MSD Ignition Control
  • No CARB Exemption Order Number
  • Must be used with an MSD 6, 7, 8 or 10 Ignition Control.
  • Does not accept a vacuum advance.
  • Fits Chrysler 273, 318, 340, 360
Edelbrock 2176 Performer Series Intake Manifold, Chrysler 318/360 V8
(Part #3252176)
                        

Designed for use with Chrysler Small Block V8 engines such as the 318/340/360, the Performer Series intake manifold from Edelbrock is a stock replacement/street legal addition to your OEM 4 barrel carburetor.  These manifolds are not equipped with EGR valves for original appearance and function.

  • For Chrysler 318/340/360 V8 engines
  • OEM replacement
  • Satin finish

Note: These are now IMCA approved for Hobby Stocks, Stock Cars, and SportMods.

Note: These manifolds are not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines.

3252176 Installation Instructions (PDF)