Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image

MSD 8352 Ford 289-302 Ready-To-Run Distributor

Price:$420.99
Sale:$399.99
8352 - MSD Pro-Billet Distributor, Ford 289-302
Price:
$420.99
EA
Sale Price:
$399.99
In Stock
Item #:
5478352
Item Details:
289-302 Ford
MSD 8352 Ford 289-302 Ready-To-Run Distributor
Click image to enlarge Click image to enlarge
Watch the video below to learn which MSD Distributor is best for your application.

 

MSD’s Ready-to-Run Ford Distributors are the perfect upgrade for bulky DuraSpark systems or ancient breaker point models. These distributors come complete and ready-to-run. All you need to do is drop it in the engine, connect three wires and fire the engine. Each distributor features an ignition module that produces a powerful inductive spark to improve combustion of the fuel mixture resulting in quick starts, smooth idle and increased performance. The billet aluminum housings of these distributors are 5/8” smaller in diameter to accommodate induction setups and tight engine compartments.

  • Simple and clean installation with only three wires to connect
  • Powerful built-in module produces a 7.5 amp single spark through high rpm
  • Easy-to-adjust mechanical advance with supplied springs and stop bushings
  • Vacuum advance canister for improved economy (can be locked out)
  • CNC machined billet aluminum housing and billet aluminum base
  • Housing is 5/8” smaller in diameter than stock Ford distributors
  • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range
  • Polished steel shaft is QPQ coated and guided by a sealed ball bearing
  • Advance plate and weights are fine blanked from Chromoly steel and QPQ coated for friction reduction
  • Mechanical advance assembly can be locked out for crank trigger systems
  • Advance weight pins are staked and tig welded to the plate
  • Nylon pads ensure smooth operation of the advance weights
  • Supplied with small diameter cap with HEI style terminals and race rotor (will accept 8441 Cap-A-Dapt)
  • Does not require an MSD Ignition Control
  • CARB E.O. Approved

547-8352 Instructions (PDF)


  1. Housing is 5/8” smaller in diameter than stock Ford distributors to accommodate induction setups and tight engine compartments.
  2. Does not require an MSD Ignition Control.
For warranty information, please visit http://www.msdhelp.com/
MSD
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Our Techs also Suggest the Following:
8202 - MSD Blaster 2 Coil
Price:
$42.99
EA
In Stock
Item #:
You May Also Be Interested In...
  • Price: $44.99
    More Info
    MSD 8207 Blaster SS Coil
    x
    							                        

    Don’t let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps with a maximum voltage output of 40,000 volts! The secondary windings are wound on a segmented bobbin which reduces the chance of voltage breakdown between the primary and secondary windings. For more protection, these windings are encased in a polyurethane compound for complete protection against vibration. The Blaster SS features brass terminals and a sturdy Rynite housing. It is supplied with a 90° boot, terminal and vibration mounts. A great addition to CD Ignitions and some stock applications.

    • Improved output coil for electronic ignitions, and MSD Ignitions
    • Efficient winding design and assembly creates a compact housing
    • Primary and secondary windings are encased in Ciba polyurethane
    • 70:1 turns ratio and lower primary resistance produce high voltage output
    • Dupont Rynite housing with a tall tower and brass primary terminals

    547-8207 Instructions (PDF)

  • (1 Rating)
    Price: $89.99
    More Info
    MSD 35599 8.5mm Spark Plug Wires Set, S/B Chevy HEI, Under Headers
    x
    							                        

    What makes or breaks a plug wire is not only how well the wire is insulated, but how low of resistance the center core has. These assembled wire sets test 40-50 ohms per foot, while most others test 1500 ohms per foot.

    These low resistance spark plug wires are designed for Small Block Chevys with HEI and are routed under the headers. 

  • (1 Rating)
    Price: $79.99
    More Info
    MSD 31359 8.5mm Spark Plug Wires Set, Chevy HEI, Over Valve Cover
    x
    							                        

    The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of low resistance spark plug wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire.

    To accomplish this, MSD uses a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.

  • (5 Ratings)
    Price: $179.99
    More Info
    Professional Products 30000 Chevy Powerfire Ready-to-Run Distributor
    x
    							                        

    This is the easiest to install, easiest to adjust CNC machined distributor you will find. Just drop in as you normally would, hook up the three wires, set the initial timing, run a vacuum line to the advance and you are ready to dial it in. Literally. The knob on the side allows you to change timing up or down 1/2 a degree at a time. Starts producing a super hot spark at 50 rpm for easy starting and keeps putting out through 10,000 rpm. It also has a small diameter cap to clear tight fit applications.

    • Cap diameter is 4.138 or slightly over 4 1/8”
    • Cap diameter at the hold down boss is 4.624 or approximately 4 5/8”
    • Cap height is 4.354 or about 4 3/8” from attachment surface to top of male plug wire post
    • Comes with the plug wire retainer plate and a 3 wire pigtail with female plug in

    Cap has HEI-style terminals. Fits Small Block and Big Block Chevy V8.