Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

MSD 8200 Blaster 2 Coil - Chrome

Price:$42.99
8200 - MSD Blaster Coil - Chrome W/ .8 Ohm Resistor
Price:
$42.99
EA
In Stock
Item #:
5478200
MSD 8200 Blaster 2 Coil - Chrome
Click image to enlarge Click image to enlarge
No video at this time.
 

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6 or 7, the Blaster Coil line is the right choice. All of the Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the Blaster Coil available. All of them have the same internal specifications, but have different housings or components. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, MSD 5, 6 or 7 Ignition Control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.

547-8200 Instruction Sheet (pdf)

Features:

  • Improved output coil for stock points or electronic ignitions, Blaster Ignition or MSD 5, 6, and 7 Series
  • Supplied with two spark plug wire boots, terminals and a ballast resistor (required if used with stock points ignition)
  • 100:1 turns ratio and lower primary resistance produce high voltage output
  • Chrome metal canister is filled with a premium grade oil for cooling
  • CARB E.O. Approved

 

Turns ratio:100:1
Primary resistance:.7 OHMs
Secondary resistance:4.5K OHMs
Inductance:8 mH
Maximum voltage:45,000 Volts
Peak current:140 mA
Spark duration:350 uS
MSD
MSD
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
Our Techs also Suggest the Following:
8213 - MSD Coil Bracket
Price:
$6.99
EA
In Stock
Item #:
5478213
You May Also Be Interested In...
  • MSD 8203 Blaster 2 Ignition Coil w/ Resistor
    MSD 8203 Blaster 2 Ignition Coil w/ Resistor
    Price: $46.99
    Sale Price: $44.99
    4% off
    More Info
    MSD 8203 Blaster 2 Ignition Coil w/ Resistor
    x 
    							                        
    
                                                        
    If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage.  The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control.
    The 0.8 ohm ballast resistor must be used with stock points ignition and Mallory Unilite applications. Includes MSD Power Tower top.
    • Improved output coil for stock points or electronic ignitions, Blaster Ignition, or MSD 5, 6, and 7 Series
    • Supplied with two plug wire boots, terminals, and jumper wire 
    • 100:1 turns ratio and lower primary resistance produce high voltage output
    • MSD Red metal canister is filled with a premium grade oil for cooling
    MSD Blaster 2 Ignition Installation Instructions (PDF)
  • MSD 8445 Cap-A-Dapt Kit
    MSD 8445 Cap-A-Dapt Kit
    Price: $45.99
    More Info
    MSD 8445 Cap-A-Dapt Kit
    x 
    							                        
    
                                                        
    If the new Pro-Cap doesn't work on your application, these MSD Cap-A-Dapts will do the trick. The MSD Cap-A-Dapt adapts a large, Ford style cap onto your MSD distributor. This large cap spaces the spark plug terminals farther apart which lessens the chances of cross-fire and ionization occurring. Spark plug-style terminals are used on the cap for tight connections that will not vibrate loose. 
    The Cap-A-Dapts will install on most MSD Pro-Billet Distributors (except the Ford FE). Kits are supplied with a high quality cap with brass terminals, rotor and cap spacer.   
    547-8445 Instructions (PDF)
  • Pertronix 60130 Flame-Thrower HV Coil, 3.0 Ohm
    Pertronix 60130 Flame-Thrower HV Coil, 3.0 Ohm
    Price: $75.99
    More Info
    Pertronix 60130 Flame-Thrower HV Coil, 3.0 Ohm
    x 
    							                        
    
                                                        
    These high voltage E-core design coils by Pertronix put out an incredible 60,000 volts and are encased in a 6063 T-5 aluminum heat sink. These coils are 50 state legal and are available with different resistance values for your application.
    • 3.0 Ohm primary resistance
    • 60,000 volts
    • 50 state legal
     
  • MSD 8226 Blaster Coil - GM
    MSD 8226 Blaster Coil - GM
    Price: $45.99
    More Info
    MSD 8226 Blaster Coil - GM
    x 
    							                        
    
                                                        
    Top off your GM Ignition system with these great new replacement coils. The GM Coils have MSD performance in factory style housings! MSD designed these Coils by combining our Blaster Coil experience with E-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The Coils will work with stock ignition systems as well as MSD equipped cars and trucks. 
    • Direct performance replacement for GM dual connector coil
    • 85:1 turns ratio and lower primary resistance produce high voltage output
    • Works with stock ignition as well as MSD Ignitions
    • CARB E.O. Approved
    547-8226 Instruction Sheet (pdf)
  • OTB Gear 6831 Finned Aluminum Coil Mount, Polished
    OTB Gear 6831 Finned Aluminum Coil Mount, Polished
    Price: $62.99
    More Info
    OTB Gear 6831 Finned Aluminum Coil Mount, Polished
    x 
    							                        
    
                                                        
    Not only is this finned aluminum coil mount good looking, it actually has some worthwhile features too. Features a standoff mounting rib that allows you to easily clean the backside and the surface behind it. No inaccessible areas to drive you crazy. Mounted with 1/4"-20 drive studs (removable) that can't be mistakenly driven into the side wall of the coil. Cast in aircraft grade A356 aluminum and polished to a very high sheen.
    Made in USA.
  • OTB Gear 6832 Finned Aluminum Coil Mount, Plain
    OTB Gear 6832 Finned Aluminum Coil Mount, Plain
    Price: $44.99
    More Info
    OTB Gear 6832 Finned Aluminum Coil Mount, Plain
    x 
    							                        
    
                                                        
    Not only is this finned aluminum coil mount good looking, it actually has some worthwhile features too. Features a standoff mounting rib that allows you to easily clean the backside and the surface behind it. No inaccessible areas to drive you crazy. Mounted with 1/4"-20 drive studs (removable) that can't be mistakenly driven into the side wall of the coil. Cast in aircraft grade A356 aluminum and polished to a very high sheen.
    Made in USA.