Lubrication Engineers 3752 LE Almagard Industrial Grease, 14.5 Oz

							                        

                                                        
Almaplex all purpose industrial lubricant is very effective in severe operations caused by moisture or high temperatures. All purpose lubricant is ideal for high speed bearings, wheel bearings, as a chassis lubricant, and for U-joints.
Seals out dirt and water
Prevents corrosive wear
Timken OK load of 45 lbs
Excellent for electric motors, machine tools, presses, forging equipment, metal fabrication, and wood working
Can be used in central lubrication systems
Excellent reversibility
Bearings operate coolerVery high dropping point
Excellent oxidation resistance and rust protection
Retains soft body and plasticity much longer than ordinary greases
Good low temperature pumpability
Aluminum complex thickener
L-E Almaplex Data Sheet (PDF)
                                                    

						                        

							                        

                                                        
Red Line’s team of chemists formulate  fully-synthetic lubricants using only the world’s  finest base stocks. At Red Line, it’s not designed to be the cheapest – it’s built to be the best.  Red Line only uses superior polyester-based products – resulting in  lubricants that are extremely stable at high temperatures.
            Synthetic CV-2 grease provides excellent water resistance, low temperature flow, and its very high melting point allows it to be used in high temperature wheel bearings, high angle and conventional CV-joints, chassis lubrication and many industrial applications.
Outperforms the best conventional or synthetic greases and lubes
Excellent high-temp stability, extreme-pressure protection, and water resistance
Used in a variety of applications with operating temps from -100°F to 500°F
Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals
Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment
Synthetic fluidity allows increases in bearing life up to 200%
Contains a red moly compound which is a superior lubricant to black moly disulfide lubricants
                                                    

						                        

							                        

                                                        Quickly packs bearings with new grease while forcing out old grease.
                                                    
						                        

							                        

                                                        For removal of grease and oil seals. Two tip sizes accomodate many applications.
                                                    
						                        

							                        

                                                        
Inject grease into low profile grease zerks or hard to reach places with this adapter. Nipple snaps into your existing grease gun end.  
 
                                                    

						                        

							                        

                                                        Kit includes:
20 - 1/4" - 28  Straight
10 - 1/8" - NPT Straight
10 - 6mm  - 1   Straight
5  - 8mm  - 1   Straight
5  - 10mm - 1   Straight
5  - 1/4" - 28  45 Deg.
5  - 1/8" - NPT 45 Deg.
5  - 1/4" - 28  90 Deg.
5  - 1/8" - NPT 90 Deg.
                                                    

						                        

							                        

                                                        
A true high temp/low temp friction-free racing grease for qualifying and racing.  Extreme friction reduction to minimize drag. This one out-performs all other racing grease formulas! Dyno tested and track proven!
Full Synthetic
Drip point 560 Degrees
Long Lasting
Timken Load 60 lbs
Excellent cold temperature properties
Resist Extreme Pressure
Extreme Friction Reducer
Designed for highest performance in wheel bearings and chassis lubrication
 
                                                    

						                        

							                        

                                                        
Lucas Red 'N' Tacky Grease is a smooth, tacky, red  lithium complex grease fortified with rust and oxidation inhibitors. It  has good water resistance and washout properties. It has excellent  mechanical stability and storage life. It is able to withstand heavy  loads for extended periods of time. It can be used in many agricultural,  automotive and industrial applications. Lucas Red 'N' Tacky Grease is  fortified with a high degree of extreme pressure additives that give it a  TRUE Timken load much higher than other greases of this type. Its  especially good for sliding surfaces and open gears.
14.5 oz. cartridge 
Key Benefits: 
Rust and oxidation inhibitors
Water resistant
Excellent mechanical stability
Long storage life
Agricultural, automotive and industrial applications