Lokar TCB-40DQ Throttle & Kickdown Cable Bracket for Edelbrock Carbs

							                        

                                                        
These Hi-Tech 700-R4 transmission kickdown kits have a braided stainless, Teflon lined cable, which will adapt to virtually any 700R4 carburetor manifold (including tinnel ram, blower manifolds, and Weber induction systems). 36" long, you-cut-to-fit cable attaches to the stainless bracket # 491-4350 or # 491-SRK4000.
491-2700HT Instructions (PDF)
                                                    

						                        

							                        

                                                        
Lokar universal black throttle cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.
Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 
491-1000U Instructions (PDF)
                                                    

						                        

							                        

                                                        If you want to modify your carburetor-equipped vehicle for performance today, you can choose from three major carburetor families – Holley, Demon, and Edelbrock. While Holley and Holley-style carburetors like Demon have been popular for years with their well documented successes and quirks, there has never before been a book covering the ins and outs of the emerging Edelbrock line of carburetors.

How to Rebuild and Modify Carter/Edelbrock Carburetors reflects the emergence of Edelbrock carburetors as the predominant Carter-style carburetors in the market today. A revision of the best-selling title Super Tuning and Modifying Carter Carburetors, this book contains more than 300 color photos, illustrations, and diagrams, covering rebuilding, tuning, and modifying Carter and Edelbrock carburetors.

This book also features the history of Carter as well as the history of the AFB and the AVS since the purchase by Edelbrock. Author David Emanuel outlines carburetor types, gives a thorough look at carb selection and carb function, and offers detailed information on modifications, tuning, and rebuilding Carter/Edelbrock carburetors.
                                                    
						                        

							                        

                                                        
Lokar Hi-Tech Braided Stainless Steel Throttle Cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.
Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 
                                                    

						                        

							                        

                                                        
This linkage kit allows you to drive around on just one 4 barrel unless you mash it. Unique linkage is adjustable and is inline for dual quads only.
 
                                                    

						                        

							                        

                                                        
This linkage kit allows you to drive around on just one 4 barrel unless you mash it. Unique linkage is adjustable and is inline for dual quads only.
 
                                                    

						                        

							                        

                                                        
These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.
Fuel Line Kit Instruction Sheet (PDF)
                                                    

						                        

							                        

                                                        
These 3/8” fuel line kits have a clean look and are easy to install. These fuel inlets for Edelbrock carburetors provide a clean and custom plumbing solution. The drop-down design routes the fuel line on the right-hand (passenger side) of the carburetor below the linkage and choke housing. The 325-8126 includes a barbed end for a push-on 5/16" or 3/8" rubber fuel line. The 325-8131 includes an aluminum fuel filter with a 40 micron filter element and -6 AN female inlet will accept an Edelbrock fuel line kit for a complete fuel-pump to carburetor plumbing solution. They are manufactured of chrome plated steel and include a 5/8" -20 threaded banjo bolt with gaskets.
Fuel Line Kit Instruction Sheet (PDF)
                                                    

						                        

							                        

                                                        Throttle Cable Bracket, Manifold Mounting. For Edelbrock Performer or Performer AVS Carbs.
Black anodized
Billet aluminum
Bracket Mounts to intake manifold
Accepts Transmission Kickdown Cable
Accepts Throttle Return Spring
Return Spring NOT Included
Hardware NOT Included
                                                    

						                        

							                        

                                                        
All Lokar Hi-Tech Throttle Cables are designed with a specially extruded liner for extended  life of the cable – not to be confused with ordinary braided brake  hose.  Cables are equipped with aluminum fittings and aluminum ferrules  to eliminate fraying.            "U-Cut-to-Fit" outer housing is  available in 48" lengthswith a "U-Cut-to-Fit" stainless inner  wire.  Clevis is designed without cotter pins or set screws.  Adapts to  factory and aftermarket pedals.   Kits complete with installation instructions.