ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Lokar MSL6B2 Tremec/Borg Warner T5,T45,T56, Double 16 Inch Shift Lever

SAME DAY SHIPPING! Order within the next 7 hours 3 minutes and receive same day shipping

Lokar MSL6B2 Tremec/Borg Warner T5,T45,T56, Double 16 Inch Shift Lever

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

If you went to the junk yard to get that modern manual transmission, you probably didn't get the shifter lever.  We have just what you need for that T5, T45, or T56 transmission.

Lever consists of a shift handle and mount bolts only, it does not include a boot, linkage or knob.

Notes

Lever is for 7/8" center to center mounting holes and has 3/8"-24 threads for the knobs. From the center of the top mounting hole to the middle of the first bend is 3 5/8", middle of second bend 8", and to the bottom of the knob jamb nut is 14-5/8". From the same hole to the top of the threads is 15-7/16". The 16" is from the bottom of the lever to the bottom of the jam nut for the knob. Overall length from bottom to top of threads is 16 7/8".

 

Customer Reviews

Rated 3.3 out of 5 by 3 reviewers.
RATING BREAKDOWN
3 reviews
5 Stars
1
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
1
RECOMMEND THIS PRODUCT:

bigmurf
Detroit area

Nice shifter, bolts don't match TKO 500

May 26, 2014
Seems like a perfectly nice shifter. However, although the 7/8" bolt spacing matches the shifter on my TKO 500, the bolts don't. They're the wrong size. Why 8mm bolts? I spent a couple of bucks to swap them for 5/16" - 18. On the plus side, this double-bend shifter wraps around the front of my Glide Engineering seat perfectly!
Pros:
  • double bend is perfect shape
  • Nice Finish
Cons:
  • oddball 8mm bolts
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

panhead
sacramento

buy a couple so when shifter breaks off

April 09, 2011
mine broke where bolts go thru after 3 months of driving my 31 ford. Buy a couple so when shifter breaks off you won't be stranded
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Merchant Response:

Lokar, Inc. warranties all products they manufacture and will replace or repair any products proved to be defective. Lokar provides a lifetime warranty on all of their products. Customer's shifter was covered under this warranty, and he was sent a replacement unit.
Reed's Performance Transmissions
Wallingford, CT USA

Lokar Double Bend Shift Lever

January 21, 2010
Great for a street rod, rat rod, or '55-'57 Chevy
Pros:
  • Perfect Fit
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

3 questions : 3 answers

1 answers

Finish? Please describe the finish. Bare? Painted black? Chrome?

bigmurf
February 11, 2014

Finish? Please describe the finish. Bare? Painted black? Chrome?

Answers

February 12, 2014
EricM
This is a chrome shifter with a black knob like shown in the picture.
1 answers

How long is this shift lever?

July 30, 2011

How long is this shift lever?

Answers

August 01, 2011
Jason
This is a 16" lever
1 answers

Could you tell me the measured distance from the center of the top mounting hole to the middle of the first bend? Then from that point to the center of the next bend and from there to the knob threads? If this rod were straight, would it measure 16" or if I ran a tapemeasure along the length and bendsof this shifter, would it equal 16"?

ColbyJack
Tulsa, OK
April 23, 2015

Could you tell me the measured distance from the center of the top mounting hole to the middle of the first bend? Then from that point to the center of the next bend and from there to the knob threads? If this rod were straight, would it measure 16" or if I ran a tapemeasure along the length and bendsof this shifter, would it equal 16"?

Answers

April 27, 2015
John
Expert
From the center of the top mounting hole on shift lever 4918003 to the middle of the first bend is 3 5/8", middle of second bend 8", and to the bottom of the knob jamb nut is 14 5/8". From the same hole to the top of the threads is 15 7/16". The 16" is from the bottom of the lever to the bottom of the jam nut for the knob. Overall length from bottom to top of threads is 16 7/8"
Page 1 of 1

You may also be interested in:

Lokar MSL6B Single Bend Shift Lever, 16 Inch
(Part #4918000)
                        If you went to the junk yard to get that modern manual transmission, you probably didn't get the shifter lever. We have just what you need for that T5, T45, or T56 transmission. 

Lever consists of a shift handle and mount bolts only, it does not include a boot, linkage or knob. Lever is for 7/8" center to center mounting holes and has 3/8"-24 thread for the shifter knobs.
Lokar MSL6C Tremec/Borg Warner T5/T45/T56 Shift Lever 12 Inch, Single
(Part #4918001)
                        If you went to the junk yard to get that modern manual transmission, you probably didn't get the shifter lever. We have just what you need for that T5, T45, or T56 transmission. 

Lever consists of a shift handle and mount bolts only, it does not include a boot, linkage or knob. Lever is for 7/8" center to center mounting holes and has 3/8"-24 thread for the shifter knobs.
Lokar MSL6D Tremec/Borg Warner T5/T45/T56, Single 10 In Shifter Lever
(Part #4918002)
                        If you went to the junk yard to get that modern manual transmission, you probably didn't get the shifter lever. We have just what you need for that T5, T45, or T56 transmission. 

Lever consists of a shift handle and mount bolts only, it does not include a boot, linkage or knob. Lever is for 7/8" center to center mounting holes and has 3/8"-24 thread for the shifter knobs.
Lokar SK-6872 5 Speed Ivory Manual Shift Knobs
(Part #4916872)
                        An ivory manual shifter knob for your 5 speed transmission. Knobs are 2" in diameter. Includes inserts to fit both 3/8"-24 and 3/8"-16 threads.
                    
Lokar SK-6874 5 Speed White Manual Shift Knobs
(Part #4916874)
                        A white manual shifter knob for your 5 speed transmission. Knobs are 2" in diameter. Includes inserts to fit both 3/8"-24 and 3/8"-16 threads.
                    
Lokar SK-6876 5 Speed Black Manual Shift Knobs
(Part #4916876)
                        A black manual shifter knob for your 5 speed transmission. Knobs are 2" in diameter. Includes inserts to fit both 3/8"-24 and 3/8"-16 threads.
                    
Speedway Hot Rod Shifter Boots
(Part #91021801)
                        

Each Speedway hot rod shifter boot kit includes a black vinyl boot, polished stainless base ring and stainless screws.

Base ring has 4" inside diameter and 5" outside diameter.
   

Cast Resin Shift Knob - Frankie
(Part #910939)
                        Row through those gears in style with this character shift knobs. 3/8" threaded insert. Fully painted. Can be used as automatic shift knob or manual shift knob.
                    
Cast Resin Shift Knob - Helmet Skull
(Part #910940)
                        

Row through those gears in style with this character shift knobs. 3/8" threaded insert. Fully painted. Can be used as automatic shift knob or manual shift knob.

Cast Resin Shift Knob - Top Fuel
(Part #910941)
                        Row through those gears in style with this character shift knobs. 3/8" threaded insert. Fully painted. Can be used as an automatic shift knob or a manual shift knob.
                    
Lokar SK-6877 Black Manual 6 Speed Shift Knobs
(Part #4916877)
                        A black 6 speed manual shifter knob for your 6 speed transmission. Knobs are 2" in diameter. Includes inserts to fit both 3/8"-24 and 3/8"-16 threads.