Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Lokar 6098 Eliminator Floor Mount Throttle Pedal, Billet Aluminum

SAME DAY SHIPPING!

Specs
Material Type:
Aluminum
Overall Width:
2.00
Sold in Quantity:
Each
Finish:
Natural
Pedal Length:
6.75
Bolt Hole Pattern:
1.47" x 1.54"
Material Thickness:
.23
MFG. Part #:
FMG-6098
Garage Sale:
No

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect.  Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket.  Mounts in multiple positions for floor and toe board angles.  Designed with built-in pedal travel stops.   Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Order 48" cable for LS1, Ramjet and Vortec applications.

  • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
  • Mounts in multiple positions for floor and toe board angles
  • Designed with built-in pedal travel stops
  • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
  • Pedal pad is 2” by 6-3/4”
  • Pad is parallelogram in shape and NOT rectangle
  • Brushed billet aluminum finish

Eliminator Throttle Pedal Installation Instructions (PDF)

 

You may also be interested in:

Lokar Hi-Tech Stainless Throttle Cable Kit
                        

Lokar Hi-Tech Braided Stainless Steel Throttle Cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

Lokar Universal Black Throttle Cable Kit
                        

Lokar universal black throttle cables are designed with a specially extruded Teflon liner for unparalleled smoothness and long life. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. “U-Cut-to-Fit” outer housing is available in 24" or 36" lengths with a “U-Cut-to-Fit” stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

Cables can be cut to fit nearly any installation. Kits come complete with installation instructions. 

491-1000U Instructions (PDF)

Lokar DP-1000HT36 36 Inch Duo-Pak Hi-Tech SS Throttle Cable Kit
                        Save with Lokar's Duo-Pak Hi-Tech Throttle Cable Kits.  The kit is   equipped with a Throttle Cable in stainless housing plus our  Stainless  Steel Carburetor Bracket and Return Spring Kit.  Duo-Pak only  available  for carbureted applications with Holley, Edelbrock, AFB,  Quadrajet and  In-Line Dual Quad carbs.
                    
Lokar TC-1000HT48 Hi-Tech Throttle Cable, 48 Inch
                        

All Lokar Hi-Tech Throttle Cables are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. "U-Cut-to-Fit" outer housing is available in 48" lengthswith a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.  Kits complete with installation instructions.

 

Lokar XFMG-6098 Billet Aluminum Eliminator Floor Mount Throttle Pedal
                        

Recipient of NSRA best new product, Lokar's Eliminator Floor Mount Throttle Pedal is designed with the Signature Lokar Quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops. Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications.  Use 48" cable for LS1, Ramjet and Vortec applications.

  • Comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket 
  • Mounts in multiple positions for floor and toe board angles
  • Designed with built-in pedal travel stops
  • Requires 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications
  • Black finish

Eliminator Throttle Pedal Installation Instructions (PDF)

Lokar XTC-1000HT36 36 Inch Black Stainless Hi-Tech Throttle Cable
                        Lokar's "U-Cut-to-Fit" Hi-Tech Throttle Cables are available in black  stainless steel braided housing. They are              designed with a  specially extruded liner for extended life  of the cable – not to be  confused with ordinary brake hose. 36" throttle cable features aluminum fittings  with ferrule to eliminate frayed cable ends. These throttle cables are adaptable  for all types of manifolds including tunnel  ram, blower manifolds and  Weber induction systems.  Mount our throttle cable  with our Stainless Steel             Carburetor Bracket and Return Springs (sold separately).    Complete instructions included in kit.
                    
Lokar SG-6017 X-Large Steel Brake Pedal Pad w/Rubber Inserts, Chromed
                        

Lokar's chrome steel brake pedal cover is EXTRA LARGE for those seeking more substance under foot.  The brake pedal pads mount with a 1/2 - 20 stud built into the back of the pad.

  • Chrome finish
  • Designed after OEM pedals
  • EXTRA LARGE for those seeking more substance under foot
  • Mount with a 1/2 - 20 stud built into the back of the pad
  • 3-3/4" x 2-3/4"

Brake and Clutch Pedal Pad Installation Instructions (PDF)

Lokar 6097 Eliminator Floor Mount Throttle Pedal, Billet Aluminum
                        

Recipient of NSRA best new product, Lokar's Eliminator Throttle Floor Mount Pedal is designed with the signature Lokar quality you have come to expect. Pedal eliminates routing cables through firewall and comes equipped with a billet aluminum splined adjustable shaft and stainless steel "under-the-floor" cable mounting bracket. Mounts in multiple positions for floor and toe board angles. Designed with built-in pedal travel stops.

  • Recipient of NSRA best new product
  • Eliminates routing cables through firewall
  • Billet aluminum splined adjustable shaft
  • Stainless steel "under-the-floor" cable mounting bracket
  • Mounts in multiple positions
  • Built-in pedal travel stops

Note: These throttle pedals require 36" "U-Cut-to-Fit" Lokar Throttle Cable for most applications. Order 48" cable for LS1 Ramjet and Vortec applications.

Lokar BAG-6107 Standard Oval Billet Aluminum Brake Pedal Pad, Brushed
                        

These oval billet aluminum brake pads come in a standard size. The brake pedal covers are designed with a 1/2 - 20 thread and includes a 1/2 - 20 stud in the kit. Can be mounted centered or off center.

  • 1/2 - 20 thread with stud included
  • Mounted either centered or off center
  • 3-3/4" x 1-3/4"

4916107 Installation Instructions (PDF)

Lokar XBAG-6005 Standard Black Billet Alum Brake Pedal Pad w/Rubber
                        

Billet aluminum brake pedal covers are designed to match the throttle pedal assemblies and are machined to fit over the stock steel pads with Lokar's exclusive mounting design, no drilling is needed and installation is simple. Traditional brake pedal pads are available with rubber inserts and a brushed finish. Lokar's billet aluminum brake pedal cover is designed with a 1/2 - 20 thread and includes a 1/2 - 20 stud in kit. These pedals can be mounted centered or off center.

  • Billet aluminum 
  • Machined to fit over the stock steel pads
  • No drilling is needed
  • Quick and easy installation
  • Rubber inserts
  • 3" x 2"

XL and Standard Pedal Comparison Chart (Link) 

49106005 Installation Instructions (PDF)

Lokar XBFG-6013 XL Series Billet Aluminum Brake Pedal Pad w/Rubber
                        

Billet aluminum brake pedal covers are designed to match the throttle pedal assemblies and are machined to fit over the stock steel pads with Lokar's exclusive mounting design, no drilling is needed and installation is simple. Traditional brake pedal pads are available with rubber inserts and a brushed finish. Lokar's billet aluminum brake pedal cover is designed with a 1/2 - 20 thread and includes a 1/2 - 20 stud in kit. These pedals can be mounted centered or off center.

  • Billet aluminum 
  • Machined to fit over the stock steel brake pedal pads
  • No drilling is needed
  • Quick and easy installation
  • Rubber inserts
  • 3-3/4" wide x 2-3/4" tall

XL and Standard Pedal Comparison Chart (Link) 

49106013 Installation Instructions (PDF)

 

Lokar GPS-6016 1/2 Inch Billet Alum Floor Mount Throttle Pedal Spacer
                        

Lokar's throttle pedal spacer is designed for use if the throttle pedal and mounting base need to be mounted further away from the firewall.  They are made specially for Lokar's billet aluminum floor mount Eliminator throttle pedals.

  • 1/2" Thick
  • Designed for extra clearance
  • Quality steel construction
  • For billet aluminum floor mount Eliminator throttle pedals

Instructions (PDF)

Lokar BFG-6013 Billet Aluminum XL Series Brake Pedal Pad w/Rubber
                        Lokar's billet aluminum brake pedal cover is EXTRA LARGE for those  seeking  more substance under foot.  These brake pedal pads mount with  a 1/2 - 20  stud built into the back of the pad. 
  • XL Series Pad Size, measures 3-3/4" wide x 2-3/4" tall
  • Rubber Insert Design Pad
  • Brushed Aluminum Finish

Brake and Clutch Pedal Pad Installation Instructions (PDF)

Lokar DP-1000U36 36 Inch Duo-Pak Black Throttle Cable Kit, Stainless
                          

Save with Lokar's Duo-Pak Hi-Tech Throttle Cable Kits. The kit is equipped with a Throttle Cable in a black housing plus our Stainless Steel Carburetor Bracket and Return Spring Kit. Duo-Pak only available for carbureted applications with Holley, Edelbrock, AFB, Quadrajet and In-Line Dual Quad carbs.  They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with aluminum fittings and aluminum ferrules to eliminate fraying. "U-Cut-to-Fit" outer housing is 36" in length with a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals.

Throttle Body and Carb End Fittings Guide (Link)

Universal Throttle Cable Installation Instructions (PDF)