Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Lightweight Nylon Brake Line Kit

SAME DAY SHIPPING!

Specs
Material Type:
Nylon
Overall Length:
25.00
Sold in Quantity:
Each
Tube O.D.:
.19
Pressure Rating:
1900 lbs
Garage Sale:
No
Notes
Includes an assortment of brass fittings.

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

Kit includes 25 ft. of nylon brake line with all of the necessary fittings. Save time and weight. Will do most modifieds or sprint cars.

  • 3/16" O.D. line
  • 1900 psi burst pressure
  • 1/8" NPT fittings
  • Not for street use

You may also be interested in:

Insulated Brake Line Tube Clamps, Bag/10
                        

You will need these rubber coated fuel line tube clamps and brake line clamps to finish your plumbing job. These tube clamps are made from zinc plated steel, are easy to work with, durable, and corrosion resistant. Choose from a full range of sizes.

10 clamps per package.

Lightweight Nylon Line, 3/16 Inch O.D.
                        Lightweight 3/16" nylon line for use with racing brake systems or gauges. Has a 1900 psi burst pressure.
                    
AFCO Nylon Brake Line Kit
                        25 ft. of line with all necessary fittings. Save time and weight. Will do most modifieds or sprint cars. 1/8" NPT fittings. 1900 psi burst pressure. Not for street use. 
                    
Speedway -3 AN Universal Racing Brake Line System
                        Kit includes everything you need to plumb any type of race car from master cylinder to caliper.

Includes:
  • (2) -3 AN 19" Stainless Steel braided brake lines with 90 deg. end
  • (2) -3 AN 26" Stainless Steel braided brake lines with 90 deg. end
  • (4) Aluminum 3/8"-24 to -3 AN bulkhead frame fittings
  • (3) 8" long 3/16" steel brake lines
  • (3) 20" long 3/16" steel brake lines
  • (3) 40" long 3/16" steel brake lines
  • (4) Removable brake line tabs
  • (4) 3/8"-24 brass unions
  • (2) 3/8"-24 IFF "T" fittings
  • (10) Insulated line clamps
Note: For off-road use only
Speedway -4 AN Universal Racing Brake Line System
                        Kit includes everything you need to plumb any type of race car from master cylinder to caliper.

Includes:
  • (2) -4 AN 19" Stainless Steel braided brake lines with 90 deg. end
  • (2) -4 AN 26" Stainless Steel braided brake lines with 90 deg. end
  • (4) Aluminum 3/8"-24 to -4 AN bulkhead frame fittings
  • (3) 8" long 3/16" steel brake lines
  • (3) 20" long 3/16" steel brake lines
  • (3) 40" long 3/16" steel brake lines
  • (4) Removable brake line tabs
  • (4) 3/8"-24 brass unions
  • (2) 3/8"-24 IFF "T" fittings
  • (10) Insulated line clamps
Note: For off-road use only
Wilwood 290-0632 Hi-Temp 570 Degree Racing Brake Fluid
                        

Wilwood's specially formulated Hi-Temp 570° Racing Brake Fluid has a minimum 570 degree dry boiling point to withstand the severe heat requirements of automotive racing. Hi-Temp 570's low viscosity allows easy bleeding of your brake system, eliminating aeration of the brake fluid caused by foaming due to excessive pumping of the pedal. 

This high temp brake fluid comes in a convenient 12 ounce container hermetically sealed to guarantee against unwanted absorption of moisture which can drastically lower the fluids boiling point (fluid from larger containers tends to become contaminated with moisture, lowering its boiling point and making it unsuitable for racing applications). 

  • Dry Boiling Point:  573° F
  • Wet Boiling Point:  313° F
Gauge Fitting, Straight AN4 Male, 1/8 Inch NPT Female
                        Gauge fittings for Autometer and Stewart Warner. Female 1/8" NPT to AN4 straight.
                    
Gauge Fitting, 90 Degree AN4 Male, 1/8 Inch NPT Female
                        Gauge fittings for Autometer and Stewart Warner. 90° AN4 Male, 1/8" NPT Female.