Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Lightweight Biscuit Bar

SAME DAY SHIPPING!

Specs
Material Type:
Steel
Sold in Quantity:
Each
Finish:
Zinc
Hole Diameter:
.75
Extended Length:
22.00
Compressed Length:
20.00
Bushing Length:
1.38
Bushing Diameter:
2.13
Sleeve Length:
10.00
Notes
If additional length is needed sleeve can be replaced with a longer one (steel: 910-34234, aluminum: 910-34134)

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

This IMCA approved lightweight biscuit pull bar comes with an 10" sleeve that gives you a 22" center to center installed length. If a different length is required, simply order different sleeve listed. 

Replacement rubber bushings are available in multiple durometer ratings (red "medium" rubbers supplied with bar). Two rubber bushings needed per bar.

You may also be interested in:

Swedged Steel Tube, 3/4 Inch Thread
                        Each 3/4" thread steel swedged sleeve has a 1" O.D. tube, 0.095 wall, and 3/4" RH and LH fine threads. Available in 1" increments from 9" to 30" and 37". IMCA appproved. Sold each.
                    
Aluminum Tie Rod Sleeve, 3/4 Inch Thread
                        Each 3/4" Tie Rod Sleeve is made out of 6061-T6 aluminum. 1" O.D. 3/4" RH and LH threads. All tubes have wrench flats and are bright gold anodized. Available in 1" increments from 8" to 27". Sold each.
                    
Biscuit Bar Replacement Rubber Bushings
                        

Replacement rubber bushings are available in multiple durometer ratings. Two rubber bushings needed per bar.

  • Blue = Soft 
  • Red = Medium
  • Black = Hard
Lightweight Spring and Puck Pull Bar
                        These spring and puck pull bars utilize a soft, 4”spring (sold separate) to initiate traction then amplify it as pucks engage.  They feature a smaller size, which reduces unsprung weight and helps with clearance issues. This innovative puck and washer system creates the most tunable, longest lasting pull bar on the market. Includes pull bar housing, (2) 0 deg. washers, (4) 15 deg. washers, and (3) 90 durometer pucks.
  • Utilizes a soft, 4”spring (sold separately) to initiate traction then amplify it as pucks engage
  • Smaller size reduces unsprung weight and helps with clearance issues
  • Innovative puck and washer system creates the most tunable, longest lasting pull bar on the market
  • Washers available in 0, 5, 10, and 15 degree tapers
  • Pucks available in 60, 70, 80, or 90 durometers
  • Washers and pucks will retro fit most any 3/4” shaft pull bar
  • Includes pull bar housing, (2) 0 deg. washers, (4) 15 deg. washers, and (3) 90 durometer pucks
Lightweight Puck Pull Bar
                        These puck pull bars are the only bar on the market that can be with single, double, or triple stage compression.  They utilize pucks to initiate traction then amplify it as bar locks out and more pucks engage.  This innovative puck and washer system creates the most tunable, longest lasting pull bar on the market.
  • Only bar on the market that can be with single, double, or triple stage compression
  • Utilizes pucks to initiate traction then amplify it as bar locks out and more pucks engage
  • Reduces unsprung weight up to 7 lbs. over other triple stage bars and helps with clearance issues
  • Innovative puck and washer system creates the most tunable, longest lasting pull bar on the market
  • Washers available in 0, 5, 10, and 15 degree tapers
  • Pucks available in 60, 70, 80, or 90 durometers
  • Washers and pucks will retro fit most any 3/4” shaft pull bar
  • Includes pull bar housing
  • Includes (2) 0 deg. washers & (6) 15 deg. washers
  • Includes (5) 90 durometer pucks & (2) 80 durometer pucks