Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

LS1 Motor Mount Adapters

SAME DAY SHIPPING! Order within the next 5 hours 24 minutes and receive same day shipping

Specs
Material Type:
Aluminum
Overall Height:
4.375
Overall Length:
7.75
Sold in Quantity:
Each
Finish:
Natural
Bolt Hole Pattern:
LS1: 4.375" horizontal x 3.1625" vertical
Hardware Included:
Yes
Material Thickness:
.383
Notes
5.50" long at bottom of mount. Adapters locate LS engine 1.1875" forward from stock location. From bell housing to center of the engine is 15.875".
LS1 Motor Mount AdaptersLS1 Motor Mount Adapters
LS1 Motor Mount Adapters

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

These billet aluminum adapters allow you to put an LS1 where a S/B Chevy would mount. They bolt to the sides of your LS1 and accept standard S/B Chevy mounts. Metric and Standard hardware included.

  • Constructed from .383" thick aluminum
  • LS1 bolt pattern is 4 3/8” horizontal and 3 1/16” vertical
  • Triangular bolt pattern for the standard SBC motor mount
  • Locates LS engine 1 3/16" forward from the original SBC placement

Note: These motor mounts may require you to move your transmission mount forward in some applications.

916-18016 Instructions (PDF)

You may also be interested in:

LS1-LS6 Chevy Weld-In Motor Mounts
SKU-7204501
                        

These LS1/LS6 Chevy motor mount kits allow you to put that "little bit different" engine in your project. They have urethane bushings and include both the engine and frame brackets. Frame brackets must be cut to fit and welded to frame. 

WARNING:   These mounts CANNOT be used in conjuntion with tight-fit headers 930-0114 & 930-0114H.

Quick Time RM-6036 LS1 Chevy Steel Bellhousing - Mechanical Linkage
SKU-91027011
                        

These strong, lightweight steel bellhousings are just the ticket for installing a manual transmission behind your favorite V8 engine. We're now offering them for LS-Series Chevys.

The compact design allows the bellhousings to fit in tight quarters and most will accommodate 10-1/2" clutches. These bellhousings are set up to use an original style clutch fork and release bearings with a Saginaw, Muncie or Richmond transmission, but can also be used with hyraulic release bearings.  

  •     Height = 6.290
  •     Trans. Bore Ø = 4.685
  •     Engine = Chevy LS-1, LS-2, LS-3, LS-6, LS-7, LS-9
  •     Trans. = Richmond, Saginaw, Muncie, Bert, Brinn, Chevy TKO 500-600, Falcon, Jerico 4-5 Speed
  •     Clutch Ø = 11"
  •     Flywheel = 168 tooth or 153 tooth
  •     Weight = 22#
  •     Stock Shifter fork & throwout bearing
  •     Passed ALL SFI testing
  •     Pivot ball, full engine plate and grade 8 bolts included

 

 

TCI Automotive 399753 LS1 Engine to GM Auto Transmission Adapter
SKU-282399753
                        

If you want to bolt a TH350, TH400, Powerglide, and 700R4 transmission up to your LS-Series engine, you need this kit. The spacer properly positions the flexplate and supports the converter hub. For Turbo 350, Turbo 400, and 700R4 transmission application.

SFI 29.1 approved. Dual bolt patterns: stock LS-Series and small GM bolt pattern.

Kit includes:

  • dual bolt pattern SFI rated flexplate
  • flexplate spacer
  • flexplate to crankshaft bolts
  • instructions

Note: Requires a 10-1/2" bolt circle converter.

Hooker Headers 12621HKR LS Swap Engine Mount Adapter 1.25 In-Clamshell
SKU-91618017
                        

Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount.

  • Moves engine forward 1.25" and up 1/2" from original early style V8 position
  • Designed for applications that use the clamshell type mount such as a G–body
  • Constructed of sturdy 3/8” thick hot rolled steel
  • Designed for lightweight, rigidity and a clean appearance
  • Precision machined for perfect alignment
  • Zinc plated for durability and corrosion resistance
  • Come complete with counter sink machine screws and instructions
  • Work with all S/B Chevy clamshell mounts & frame towers
  • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

LS Swap Engine Mount Adapter Instructions (PDF)

Hooker Headers 12622HKR LS Swap Engine Mount Adapter, 3 Inch Forward
SKU-91618018
                        

Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount.

  • Constructed of sturdy 3/8” thick hot rolled steel
  • Designed for lightweight, rigidity and a clean appearance
  • Precision machined for perfect alignment
  • Zinc plated for durability and corrosion resistance
  • Come complete with counter sink machine screws and instructions
  • Work with all small-block Chevy mounts and frame towers
  • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

916-18018 Instructions (PDF)

Hooker Headers 12623HKR LS Swap Engine Mount Adapter, 1-1/4 In Forward
SKU-91618019
                        

Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount.

  • Constructed of sturdy 3/8” thick hot rolled steel
  • Designed for lightweight, rigidity and a clean appearance
  • Precision machined for perfect alignment
  • Zinc plated for durability and corrosion resistance
  • Come complete with counter sink machine screws and instructions
  • Work with all small-block Chevy mounts and frame towers
  • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

916-18019 Instructions (PDF)

Hooker Headers 12611HKR LS Swap Engine Mount Adapter, Stock Location
SKU-91618021
                        

Hooker LS engine swap mounts are designed to make the task of swapping an LS engine into your classic muscle car or truck as easy as possible. With five different mount kits available, you are sure to find the mounts needed to position the engine and transmission assembly in the appropriate location. Plates are available for use with stock small–block Chevy engine mounts to place the engine and transmission in the stock location or move it forward up to 3", depending on the mount. 

  • Constructed of sturdy 3/8” thick hot rolled steel
  • Designed for lightweight, rigidity and a clean appearance
  • Precision machined for perfect alignment
  • Zinc plated for durability and corrosion resistance
  • Come complete with counter sink machine screws and instructions
  • Work with all small-block Chevy mounts and frame towers
  • Perfect for use with Hooker’s growing family of Gen III/IV (LS1/LS2/LS6/LS7) engine swap header

916-18021 Instructions (PDF)

Universal Engine Mount Kits
SKU-91018033
                        

Available for small block Chevy, GM LS or Ford applications.

Each kit includes:

  • Weld on frame pads
  • Rubber bolt through cushion
  • Engine pads
  • Hardware
Adjustable LS Engine Motor Mount Adapter Bracket Kit
SKU-9104870
                        These engine mount adapter kits are specially designed for use on LS engines with a variety of applications.  They come adjustable to provide up to 3" of total range.
  • Provides up to 3" of total adjustment range
  • For GM LS engines
  • Includes all hardware
  • Includes polyurethane mounts

Installation Instructions (PDF)

Prothane 7-504-BL Polyurethane S/B or B/B Chevy Motor Mounts
SKU-91018015
                        

These black polyurethane motor mounts for S/B and B/B Chevy are much stronger than OE rubber mounts but still reduce vibration.

  • Limits unwanted movement thereby putting more power to the wheels
  • Tough like solid metal mounts without the vibration and noise
  • Resistant to oil, chemicals and road contaminants that typically deteriorate rubber