Call: 800.979.0122
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
x
Help Center

sales@speedwaymotors.com

Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

LED 1157 Tail Light Bulb, 1 Inch, Red

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Sold in Quantity:
Each
Overall Diameter:
1.000
L.E.D. Color:
Red
Notes
Measures 1-1/2" from contact pins to top of bulb and 3/8" from bottom of cluster to first pin.
LED 1157 Tail Light Bulb, 1 Inch, Red
LED 1157 Tail Light Bulb, 1 Inch, Red
LED 1157 Tail Light Bulb, 1 Inch, Red
LED 1157 Tail Light Bulb, 1 Inch, Red

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear, but are red when illuminated.

LED taillight bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LEDs will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)

 

Customer Reviews

Rated 3 out of 5 by 2 reviewers.
RATING BREAKDOWN
2 reviews
5 Stars
0
4 Stars
1
3 Stars
0
2 Stars
1
1 Star
0
RECOMMEND THIS PRODUCT:

rich71
Verified Purchaser
bak ca.

to short

May 24, 2013
wont work in my blub holders the will not lock in they dont lock in holder they made lights to short
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

mrfaatmann
Verified Purchaser
Phoenix Az.

wanted them to work

May 10, 2011
when I tried to install the bulbs I found they did not fit the older (1975) bulb sockets on my Chevy truck . Too bad as they would have done a great deal for road safety especially in Phoenix traffic .
Pros:
  • A good saftey tool
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Merchant Response:

Please measure your lights before ordering. These bulbs measure 1-1/2" from the contact pins to the top of the bulb and 3/8" from the bottom of the cluster to the 1st pin.
Page 1 of 1

Product Q&A

3 questions : 5 answers

2 answers

How bright are these? How bright are these? I want to use them as tail lights for my motorcycle but want them a lot brighter than standard bulbs and I only have a small amount of space to put them so can't go bigger, thanks.

Rossco
Florida, USA
August 26, 2014

How bright are these? How bright are these? I want to use them as tail lights for my motorcycle but want them a lot brighter than standard bulbs and I only have a small amount of space to put them so can't go bigger, thanks.

Answers

October 02, 2014
SillySally
Had same problem. These are 1/2" shorter that regular bulb and not match wider. Very bright
August 28, 2014
EricM
These are LED replacements for an 1157 bulb. Many of our customers use these in older vintage applications where the lens is really dark and the standard bulbs are not bright enough for good visibility at distance. We have had many customer comments stating the improvement in light output over the standard bulbs which should help in your application as well.
1 answers

Is this a 6 volt led or a 12 volt led?

anthony
culver city, ca
November 07, 2011

Is this a 6 volt led or a 12 volt led?

Answers

November 08, 2011
Jason
These are a 12 volt light
2 answers

I have a 75 chevy 1/2 ton pu . Do I need to buy the flasher to have these LED bulbs work ??

Faatmann
Phoenix Az.
April 21, 2011

I have a 75 chevy 1/2 ton pu . Do I need to buy the flasher to have these LED bulbs work ??

Answers

April 22, 2011
Clark
A special low-load flasher (such as our 91064110) or a pair of “dummy load” resistors( 91003030) will almost always be needed. LED lights require so little “juice” that the conventional flasher can’t cope.
May 12, 2011
mrfaatmann
Yes you need to have the flasher
Page 1 of 1

You may also be interested in:

1157 LED Tail Light Bulb, 1-3/4 Inch, Red
(Part #91131024)
                        

These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The tail light bulbs appear to be clear, but are red when illuminated.

LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.) 

LED 1157 Tail Light Bulb, 1 Inch, Amber
(Part #91131023)
                        

These LED tail light bulbs put out the light you're after, but don't get hot like normal bulbs. 1157 bulbs have staggered pins and 2 contacts on the plug. The bulbs appear to be clear, but are amber when illuminated.

LED bulbs are quite efficient and use such small amounts of power that a normal flasher will not work correctly. The use of LED's will almost always require the use of a special "low load" flasher like our 910-64110 (2-prong) or 910-64112 (3-prong.)

 

LED Flasher Unit, 2-Prong
(Part #91064110)
                        

The technology of LED replacement blubs has come a long way the last few years. The problem is that they have gotten so efficient, that even electronic flashers that once worked, now don't. So now we offer a new flasher made specifically for LED bulbs. These flashers do not need a grounded connection. 

LED Flasher Unit, 3-Prong
(Part #91064112)
                        The technology of LED replacement blubs has come a long way the last few years. The problem is that they have gotten so efficient, that even electronic flashers that once worked, now don't. So now we offer a new grounded flasher made specifically for LED blubs.