Products to Compare (max of 3)
Compare These Parts
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Help Center
How to Contact Us

U.S.Order Line:


(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:


International Order Line:

Since 1952

Kirkey Junior 24 Series 8 Degree Aluminum Racing Seat

Free Shipping Free Shipping
Material Type:
Sold in Quantity:
Garage Sale:
Overall Height:
Overall Width:
Material Thickness:
Inside Width:
Kirkey Junior 24 Series 8 Degree Aluminum Racing Seat

Click image to enlarge



Q & A

What's in the Box

All of the benefits of KIRKEYs professional racing seats mean better lap times for you. Full size comfort and safety. All of KIRKEY Racing Fabrications smaller sized 24 Series seats are designed and manufactured with the same care and attention to detail as our other professional racing seats. TIG and MIG welded and reinforced in critical areas. Includes multi-level shoulder harness and sub belt cutouts.

  • TIG welded .100" thick 5052 grade aluminum
  • 8 Degree Layback Style
  • MIG welded inside for added strength
  • Headrest is reinforced with offset aluminum extrusion
  • Water resistant nylon upholstery is double stitched around belt openings and all stress points
  • Multi-level shoulder harness cutouts and submarine belt opening are standard
  • This seat has rib supports and headrest lowered one inch for smaller children 

Your choice of 8 Degree Layback in 10", 11", 12", 13" or 14" widths. Includes black cover. 

Kirkey Seat Design Illustration (GIF)

960-24000 Instructions (PDF)

Item Details

24 Series - 8 Degree Layback

Customer Reviews

Rated 4 out of 5 by 1 reviewers.
1 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star

Verified Purchaser
Millville, NJ

Great starter seat

February 16, 2012
Seat can be mounted in many fashions, and is very sturdy for racing. Needs more holes for belts to pass through on shoulder area.
  • Reliable
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

1 questions : 1 answers

1 answers

Could I use a regular Hans or Simpson 20 degree head and neck restraint with this seat?

Arizona, USA
August 18, 2014

Could I use a regular Hans or Simpson 20 degree head and neck restraint with this seat?


August 19, 2014
This is a fairly upright style seat being an 8 degree. More than likely if you have it mounted in the car at 8 degrees then you will need closer to a 10 degree Hans device. Use an angle finder to get the angle of the back of the seat when mounted in the car to determine seat angle, then order the Hans that is closest to that angle.
Page 1 of 1

You may also be interested in:

Simpson Individual Arm Restraints
(Part #63031506)
                        These Simpson individual arm restraints have padded arm bands and stainless steel hardware. 14" attachment straps. Available in red, blue or black.
Simpson Quarter Midget Cage Net
(Part #6303605)

Just the right size for quarter midgets.

The simpson quarter midget cage net can be adjusted from 23" to 28" in length. It is 7-1/2" wide at widest point.

Choose either black, blue, or red. 

RCI Junior Racing Suit Jacket Only
(Part #6009160)

This is garage sale priced because it has been discontinued.


**No Warranty, No Returns On Garage Sale Items**


RCI offers the same big protection in smaller junior sizes with these SFI approved single-layer junior jackets. Made from flame-retardant Proban cotton, they meet SFI 3.2A/1 specifications, have a Velcro neck closure, expansion-style pockets, function up or down collar design, and are available in a variety of colors. 

Simpson 5-Point Harness, Wrap Around, Quarter Midget Seat Belt
(Part #63029025)

Built specifically for Quarter Midget racers. Wrap around style (pull down) with latch & link buckle.

  • Crotch strap - 15"
  • Should Strap - 33"
  • Waist Strap - 44"

Item Details

Wrap-around Style
Simpson JR Speedway Shark Helmet
(Part #630178)

The Jr. Speedway Shark supports the next generation of racers with the same great features and safety requirements you have come to expect from the Shark family of helmets.

Available Colors: White, Black, Matte Black, Red, Yellow, Safety Orange, Silver, Metallic Blue, Metallic Bronze, Metallic Maroon, Metallic Pearl White, & Rattlesnake

Available Sizes : Youth M, Youth L

Simpson Sizing Chart (GIF)

Kirkey 27 Series Micro/Mini Sprint Racing Seat
(Part #96069000)

The latest innovation from Kirkey to grant Micro/Mini sprint racers the same protection as sprint car drivers.  Designed to be used in smaller open wheel race cars.  Black vinyl padding with three cloth color options: Black, Red, & Gray

  • Compact design allows easy installation in all types of chassis
  • Detachable left-front section allows clearance for use in all engine classes
  • Reinforced shoulder restraints for extra strength
  • Vertically adjustable reinforced head restraint allows unobstructed peripheral vision
  • Compatible with all head and neck restraints
  • 7 sizes available: 12", 13", 14", 14.5" 15", 15.5", 16" (measured at drivers' hips)

960-69000 Instructions (PDF)

960-69000 Dimensions

Zoombang ZB-6000FRB Seat Padding, Seat Back Pads
(Part #4416000)

Adapt a seat for a better fit with added protection! The specially engineered polymer is soft at rest and instantly stiffens on impact absorbing the shock and dissipating energy. 3/8” thick pads will not wear out, melt, or freeze. Attach permanently with adhesive or temporarily with Velcro. Fits any seat and works with existing seat covers and padding.

Sold in pairs.

Bell K1 Sport SA10 Racing Helmet
(Part #210210)
                        The Bell K1 Sport is a multi-use, full featured racing helmet with aero styling and Bells innovative Dominator chin bar design. The K1s aerodynamic features enhance the helmets stability in high-speed racing environments. The Snell SA2010 rated K1 Sport is a great race helmet for open wheel racers or kart racers who plan on moving into other forms of racing that require fire retardant helmets.

The K1 Sport features a lightweight composite shell, comfortable interior fit and maximum ventilation with full chin bar, forehead and top vents. The K1 Sport Racing Helmet takes a 276 SRV Shield and each helmet comes with a clear shield and Bell visor strip as standard equipment.

The K1 Sport Helmet also features Bells redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can customize the fit of the K1 Sport Helmet by using Bells Cheek Pad Inserts in 5mm, 10mm, 15mm and 20mm sizes to tighten the fit in the cheek area. The race helmet is available in White and flat black finish - the rubberized surface is more resistant to finger prints and smudges than traditional flat finishes. The K1 Sport is pre-drilled for use with head and neck restraint devices.

Bell Helmet Sizing Chart (PDF)

Proper Fitting Guidelines (PDF)

Item Details

Multi-use, full featured helmet.
Bell GP2K Kart Racing Helmet
(Part #210906)

The GP2K racing helmet is certified to the Snell K2010 standard which requires the helmet to be tested to the Snell SA2010 standard test criteria but does not require the helmet to be fire retardant.

The GP2K race helmet takes a 287 SRV Shield which features the SRV-1 pivot system and thumb tab on the drivers left side to allow for easy shield operation. Each helmet comes with a clear shield and Bell visor strip as standard equipment. The GP.2K also features Bells redesigned face piece with recessed areas that allow for seamless radio integration and easy installation. Racers can also customize the fit of the GP2K by using Bells Cheek Pad Inserts to tighten the fit in the cheek area. In addition, replacement face piece kits are available for the GP2K in the event the front interior chin piece needs to be replaced. Available in White.

Bell Helmet Sizing Chart (PDF)

Proper Fitting Guidelines (PDF)

Item Details

This is the karting only version of the GP.2 helmet.
Bell Vador SA2010 Racing Helmet
(Part #210930)

The Vador is a complete design departure for Bell, incorporating an aggressive blunt nose design and pilot style shield. Designed primarily for use in drag racing, karting and dirt track, the Vador is certified to the Snell SA10 standard.

The Vador features a lightweight composit shell, comfortable interior fit and rear facing vents to prevent dirt from entering the helmet. The Vador takes a 289 SRV (3MM) shield with thumb tab on the left side to allow shield operation, SRV-1 visor system and new rubber eyeport gasket for improved visor seal. Comes with a clear shield and visor strip.

The Vador features Bells redesigned face piece with recessed areas that allow for seamless radio integration and installation. Racers can also customize the fit by using Bells Cheek Pad Inserts to tighten the fit in the cheek area. The helmet is available in a flat black surface that is more resistant to finger prints and smudges.

The Vador is set up for use with Head and Neck Restraint devices and features Bells M6 terminal hardware that is incorporated into the helmet. It accepts anchor system hardware. (Consult with the Head and Neck Restraint manufacturer to select an anchor system that allows the user to index the hardware in the proper location for use with the device.)

Size Chart

Item Details

Aggressive blunt nose design and pilot style shield. Designed primarily for drag racing, karting, and dirt track racing.
Bell GP2 Youth Racing Helmet, Youth Series
(Part #210901)

The GP.2 Youth helmet is designed for young racers who need an extra small size helmet that is fire retardant. The GP.2 Youth has the same design features as the adult GP.2 model. The GP.2 Youth is SFI 24.1 certified – the SFI 24.1 standard is accepted by various youth racing and karting organizations including the Quarter Midget Association of America (QMA). Metallic Silver

  • Formula Style Helmet
  • Advanced Aerodynamic Styling
  • Air Intake To Maximize Forehead Ventilation
  • Direct Flow Chin Bar Ventilation
  • Youth Size Shell
  • Lightweight Composite Shell Technology
  • Standard Eyeport
  • Positive Seal Visor System
  • 287/3MM SRV Shield (SRV-1 Pivot System)
  • E-Max Plus Multi Density Liner
  • Pro Style Comfort-Plus Interior
  • Removable/Replaceable Cheek Pads
  • SFI 24.1 Youth Certification
  • Available in sizes 4XS to XS

Item Details

Same design features as the adult
GP.2 helmet. SFI 24.1 certified.
Impact NecksGen REV Head and Neck Restraint System
(Part #44991002)
                        The Impact NecksGen is a revolutionary head and neck restraint designed specifically with adjustablilty, angular impact protection, comfort, and affordability in mind.  Manufactured from a lightweight carbon fiber DuPont composite material, the Impact NecksGen weighs a mere 1.8 pounds and features unique body forming shoulder pads minimizing the pressure points on the collarbones.  Designed with a single adjustable lateral helmet tether, the Impact NecksGen unit provides an alternate load path for superior side on impact protection.
  • SFI 38.1
  • Comes with one helmet post kit
  • Patent pending tension neutralizing tether provides superior lateral and frontal support
  • Weighs just over 1 lb.
  • Allows for quick entry and exit of the car
  • Ergonomic design offers little to no interference with seat or helmet
  • Carbon fiber composite construction
  • Works in any race car and every seat angle
  • Available in Small, Medium, or Large

Sizing Specifications

Impact NecksGen REV Features (PDF)

Sparco Kart Anatomic Neck Brace Collar, 360-Degree
(Part #6741602)

These kart racing collars from Sparco were engineered to offer safety and comfort at a reasonable price. This neck brace/collar features variable density padding for firm support where the helmet rests and softer support under the driver's chin.

  • Anatomic 360-degree collar
  • Extensively tested for proven effectiveness of neck support during crash tests
  • Rear "spoiler" reduces weight of helmet on back
  • Velcro closure
  • Sold Individually
  • Available in colors: Black/Blue, Black/Gray, and Black/Red
  • Choose from sizes: Small (S) youth or Standard (STD) adult