Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image

K&N Filters HP3001 Performance Oil Filter, Ford

Price:$11.99
HP3001 - K&N Performance Oil Filter, Ford V8
Price:
$11.99
EA
In Stock
Item #:
465070008
K&N Filters HP3001 Performance Oil Filter, Ford
Click image to enlarge Click image to enlarge
  • K&N Filters HP3001 Performance Oil Filter, Ford
  • K&N Filters HP3001 Performance Oil Filter, Ford
No video at this time.
 

These filters feature thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. Comes with a 1” nut welded to the top of the canister so they can be easily wrenched-off with a standard tool. Plus, the filter media is unaffected by racing gas, methanol and nitromethane fuels.

  • Thicker shell provides 550 psi burst strength
  • Withstands higer oil pressures
  • 12 gpm flow
  • 1 quart capacity
  • Drilled for safety wire attachment

 

HP-3001 Cross Reference (Link)

  • Height: 5.7 in
  • Outside Diameter: 3.65 in
  • Thread Inside Diameter: 0.75
  • Thread Number: 16UNF-2B
  • PSI Relief Valve: 8-11
  • Anti Drain Back Valve: Yes
  • Style: Canister
  • Removal Nut: Yes
  • Gasket Material: Nitrile Rubber
  • Filter Material: High Flow Premium Media
  • Bypass Valve: No
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
You May Also Be Interested In...
  • Price: $9.99
    More Info
    Fram HP1 High Performance Racing Oil Filter, Ford
    x
    							                        

    Fram Racing oil filters have a heavy-duty steel body construction to resist high pressure surges and external impact. Rated at 10 GPM with a maximum 200 psi operating pressure. The HP1 has a pressure relief valve and a 25 micron rating.

    • Low-restriction racing media designed for high oil flow
    • Spiral-shaped center tube to provide protection against collapse
    • Heavy gauge steel tapping plate to withstand high pressure flexing
    • Screen-over bypass valve to provide additional protection against larger contaminants
    • Relief valve developed uniquely for high oil flow racing conditions

  • Price: $14.99
    More Info
    Moroso 23845 Engine Save Pre-Filter Oil Filter Screen
    x
    							                        

    Stainless steel screen locates between the block and the oil filter to stop debris before it enters the filter element. Periodic inspections serve as early warning of engine failure. Fits S/B, B/B and 90° V-6 Chevy engines with spin-on oil filters. Does not affect oil pressure.

    • Unique stainless steel screen locates on top of spin-on oil filters to trap debris before it enters the filter element undetected
    • Particulate matter trapped in the screen and detected during periodic inspections serves as an "early warning signal" for impending engine failures
    • 304 stainless steel filtration-grade screen traps contaminants down to the 280 micron range without affecting oil flow or oil pressure
    • Crimped rings at both outside and inside diameters provide increased strength and extended durability

  • Price: $3.99
    More Info
    AC Delco Duraguard Oil Filter, Ford/Mopar
    x
    							                        

    Protect your Ford or Mopar engine with this premium quality oil filter. Outstanding filter capacity, enhanced efficiency, consistent flow management and high-durability design help provide exceptional filtering performance.

    • 98% single-pass efficiency at 25-30 microns
    • Patented cellulose media traps particles 1/3 the width of a human hair
    • Designed with 5x greater burst strength than most engine oil operating pressures