Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

KRC Power Steering 91504000 Tank

SAME DAY SHIPPING!

Specs
Material Type:
Aluminum
Overall Height:
8.25
Sold in Quantity:
Each
Finish:
Natural
Overall Diameter:
3.00
Inlet fitting:
-6 AN
Outlet Fitting:
-10 AN
Cap Diameter:
3.20
Capacity:
21.50
MFG. Part #:
91504000
Garage Sale:
No
Notes
Includes mounting bracket.

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

KRC's brushed aluminum finished deluxe power steering reservoir tank is completely TIG welded by the best craftsmen in the country. This tank features a quarter turn non-vented cap and a -6 inlet and -10 outlet fitting. Inside the tank is an internal tee to reduce the aeration of the fluid inside the tank. Included is a bracket to mount the tank to a roll bar, you must provide hose clamps. KRC only recommends using a NON-VENTED cap on KRC power steering pumps.

Round Tank Dimensions

Specs


Item Details

Deluxe round tank with mounting bracket

You may also be interested in:

Aluminum Reservoir Tank
                        

Firewall mounted aluminum tank for sprint car power steering fluid. Has AN 6 return and 1/2" pipe bung outlet, with 1/8" pipe for wing valve.

Holds approximately 24 oz.

GM Power Steering Pump With Chrome Reservoir
                        

We offer this Saginaw power steering pump with a new reservoir, billet cap, chrome hardware and new dipstick. Desirable early style 1965-79 pump with threaded and keyed shaft for easy pulley installation. Available in chrome. Hoses available from local parts stores.

Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included. Use bracket available below.

Pulleys available separately. AN6 fittings shown for racing applications. 

Power Steering Hose Kit, -8 AN Reservoir
                        

This power steering hose kit is just what you need to plumb your driver's side remote reservoir power steering set up. The AN 8 hose kit includes 4' of AN 6 high pressure hose, 5' of AN 6 blue aeroquip hose and 3' of AN8 blue aeroquip hose. One 45° AN 6 and one 90° AN 6 fittings are included as well as an AN 6 straight brass push-on and one AN 6 and two AN 8 90° push-on hose ends.

NOTE: Does NOT contain steering box fittings 

Tuff Stuff GM Saginaw Power Steering Pump with Reservoir
                        These Saginaw power steering pumps from Tuff Stuff come with a new reservoir, billet cap, chrome hardware and new dipstick. Desirable early style 1965-79 pump with threaded and keyed shaft for easy pulley installation. Available in powder coated black or chrome finish. Hoses are available from most local parts stores. 

Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included.

  • Saginaw power steering pump with a new reservoir, billet cap, chrome hardware and new dipstick
  • Powder coated black or chrome
  • Keyed shaft for easy pulley intallation
  • Pulleys available in plain, polished, and chrome
  • 6" diameter pulleys not included

Works well with small block Chevy engine brackets 916-67920 or 913-32902.

AFCO 37152 Power Steering Reservoir (Firewall Mount)
                        
  • Spun aluminum
  • 22 oz. capacity
  • Internal diffuser to prevent fluid aeration
  • Integral firewall mount .75 lbs
  • 3" O.D.- 9" tall
  • -10 AN Outlet / -6 AN Return
All-In-One Accessory Clamps
                        

These billet aluminum clamps are great for mounting and adjusting hood pins. The accessory bracket and 3.5" hose clamps can be added for holding power steering and radiator reservoir tanks.

Available for 1”, 1.25”, 1.375”, or 1.50” tube sizes. Clamp is drilled and tapped ½” – 20 in the center, and 10-32 on the outsides.

Hood pins and brackets sold separately.