Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Jiffy-Tite 21306B Quick Connect Fluid Fittings, -6 AN Female Socket

SAME DAY SHIPPING! Order within the next 5 hours 28 minutes and receive same day shipping

Specs
Material Type:
Aluminum
Sold in Quantity:
Each
Finish:
Anodized
Angle:
Straight
MFG. Part #:
21306B
Garage Sale:
No
AN Size:
-6 AN
Jiffy-Tite 21306B Quick Connect Fluid Fittings, -6 AN Female Socket
Jiffy-Tite 21306B Quick Connect Fluid Fittings, -6 AN Female Socket

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Application

SOCKET FOR GAS, COOLANT, OIL
  • 468-21802
  • 468-21404
  • 468-21306
  • 468-21406
  • 468-21506P
  • 468-21606
  • 468-51408
  • 468-51508
  • 468-51410
  • 468-51412
  • 468-51312

SOCKET FOR ALCOHOL

  • 468-21306B
  • 468-21406B
  • 468-21506BP
  • 468-21606B

PLUG FOR GAS, COOLANT, OIL

  • 468-22802
  • 468-22404
  • 468-22406
  • 468-52410
  • 468-52412
  • 468-52312
  • 468-52812
  • 468-52812E

PLUG FOR ALCOHOL

  • 468-22406B
  • 468-22506B
  • 468-22606B

CARB KITS

  • 468-300C1
  • 468-300C1B

 

You may also be interested in:

AN3 Hose Test Fitting
(Part #6176630)
                        

These hose test fittings simply screw into common AN hose ends and allow you to pressurize with air and submerge in water. Easy to use.

Fitting Thread Application Chart (GIF)

Speedway Full Flow Swivel Hose End Fitting, 45 Degree, Anodized, -6 AN
(Part #62010091)
                        

This revolutionary one-piece fitting design offers motorsport enthusiasts uncompromised quality and assurance that they are using the highest performing components available. These compression-style fittings are easier to assemble and offer significantly better seal integrity than out-dated cutter-style fittings.

They are manufactured from the highest quality aluminum and are then black anodized to give them a new sleek look. These full flow hose ends use a swivel head design, allowing the fitting to rotate as you are tightening or assembling the hose. These fittings come in a 45 degree angle and are available in a variety of sizes to fit your specific hose diameter. Upgrade your fittings to these full flow hose ends and see the difference.

  • -6 AN female to push-on adapter
  • 45 degree angle fuel line hose connector
  • Lightweight aluminum hose ends are completely reusable, and interchangeable
  • 37° angled sealing surface guarantees a positive anti-leak seal
  • Available in a Black corrosion resistant finish

Full Swivel Application Chart (GIF)

Jiffy-Tite 21406B Quick Connect Fluid Fittings, -6 AN Male Socket
(Part #46821406B)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 21506BP Quick Connect Fluid Fittings -6 AN Push Lock Socket
(Part #46821506BP)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 21606B Quick Connect Fluid Fittings, -6 AN Reusable Socket
(Part #46821606B)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 22506B Quick Connect Fluid Fittings, -6 AN Push Lock Plug
(Part #46822506B)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 22406B Quick Connect Fluid Fittings, -6 AN Male Plug
(Part #46822406B)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 22606B Quick Connect Fluid Fittings -6 AN Reusable Nut Plug
(Part #46822606B)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 21802 Quick Disconnect Wing Fittings, 1/8 Inch NPT, Male
(Part #46821802)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 21404 Quick Disconnect Wing Fittings, -4 AN Male
(Part #46821404)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 21306 Quick Disconnect Wing Fittings, -6 AN Female
(Part #46821306)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 21606 Quick Connect Fluid Fittings, -6 AN Reusable Nut
(Part #46821606)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 51408 Quick Disconnect Radiator Fittings, -8 AN Male
(Part #46851408)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 21506P Quick Disconnect Fluid Fittings, -6 AN Push Lock
(Part #46821506P)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 51410 Quick Disconnect Radiator Fittings, -10 AN Male
(Part #46851410)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 51412 Quick Connect Fluid Fittings, -12 AN Male Socket
(Part #46851412)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 51312 Quick Connect Fluid Fittings, -12 AN Female Socket
(Part #46851312)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 22802 Quick Connect Fluid Fittings, 1/8 Inch NPT, Male Plug
(Part #46822802)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 22404 Quick Connect Fluid Fittings, -4 AN Male Plug
(Part #46822404)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 22406 Quick Connect Fluid Fittings, -6 AN Male Plug
(Part #46822406)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 52410 Quick Connect Fluid Fittings, -10 AN Male Plug
(Part #46852410)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 52812 Quick Connect Fluid Fittings-3/4 Inch NPT Male Socket
(Part #46852812)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 52412 Quick Connect Fluid Fittings, -12 AN Male Plug
(Part #46852412)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 52312 Quick Connect Fluid Fittings, -12 AN Female Socket
(Part #46852312)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 52812E 90 Male Elbow-3/4 Inch NPT Connect Fluid Fitting
(Part #46852812E)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 51508P Quick Connect Fluid Fittings, -8 AN Push Lock Socket
(Part #46851508P)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)

Jiffy-Tite 51510P Quick Connect Fluid Fittings -10 AN Push Lock Socket
(Part #46851510P)
                        

Tested and proven to have a 100% leak proof seal at 200 psi and 350° F. Made of aluminum, these Jiffy-Tite valved disconnects are compact, durable, and corrosion resistant. High-flow valve technology in the plug and socket assembly automatically interrupts the flow of fluid when disconnected by hand. Not intended for brake systems.

Select a socket and a plug to make a complete coupler. AN sizes are 37° for mating with existing hose ends or bungs.

See Application tab for intended use on each disconnect/plug.

Jiffy-Tite Flow Specs (Link)