Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

JAZ Products 892-010-01 Street Rod Fuel Cell, 10 Gallon

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Sold in Quantity:
Each
Color:
Black
Material Type:
Polyethylene
MFG. Part #:
892-010-01
Safety Foam Included:
No
Pickup Tube Included:
No
Overall Height:
9.00
Overall Width:
12.00
Overall Length:
24.00
Capacity:
10.00
JAZ Products 892-010-01 Street Rod Fuel Cell, 10 Gallon

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Seamless, one-piece, polyethylene fuel cell. Install your own fittings. Fuel cell has one 3/8" hole pre-drilled due to the injection mold process (located in the center of the 9" x 24" side).

Item Details

24" long, 12" wide, 9" deep

Notes

Tech Tip: Carefully determine the size of fuel cell needed. Depending on the capacity, a full fuel cell will generally weigh between 100 and 200 lbs. Buy the optimum size fuel cell to best accommodate weight bias and fuel consumption.

Customer Reviews

Rated 4 out of 5 by 3 reviewers.
RATING BREAKDOWN
3 reviews
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
1
1 Star
0
RECOMMEND THIS PRODUCT:

Hot Rod
Verified Purchaser
Jacksonville Florida

I would buy this product again

October 05, 2011
fuel cell fit great in the back of 1930 model A.The cell was easy to mount and install filler neck.
Pros:
  • Easy To Install
  • Durable
  • Lightweight
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Jim
Verified Purchaser
Ottawa il

i would buy again

October 08, 2010
quality is good but be prepared to do some work on fittings and filler spout. Have to make your own hold down straps.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Mini Formula Indy
Cleveland OH

This is a great value

March 13, 2010
On our custom builds, this tank is a great value. Run it any direction you want, cut your own holes and you're in business.
Pros:
  • Thick and well built
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

8 questions : 9 answers

1 answers

how to install the fuel cap , bolts up or down, how to vent it, can i use your rollover vent as a vent , and pipe it out side, battery box is right next to tank.

Bussie
Longmont, Co.
March 10, 2012

how to install the fuel cap , bolts up or down, how to vent it, can i use your rollover vent as a vent , and pipe it out side, battery box is right next to tank.

Answers

March 12, 2012
Eric
When installing the cap the head of the bolts will be inside the tank and the nuts on the outside of the tank. For venting we recommend a rollover vent like our part number 458364. You would then want to route the hose to a point where fumes will not be a problem.
1 answers

On a 27 t bucket where would you recommend mounting this fuel cell or is there another I could use

February 18, 2012

On a 27 t bucket where would you recommend mounting this fuel cell or is there another I could use

Answers

February 21, 2012
John
Part number 91076050 Customers normally mount the fuel cells in the small pickup bed behind the T bucket body. These cells are offered in different dimensions and capacities to meet customer needs and we also offer the aluminum fuel tanks under numbers 715750 and 715752.
1 answers

It was mentioned that the hole was drilled "in the side, in the center". Which side? For instance the 16 gallon tank is 25" long 17" wide 9" deep On which side is it drilled?

July 15, 2011

It was mentioned that the hole was drilled "in the side, in the center". Which side? For instance the 16 gallon tank is 25" long 17" wide 9" deep On which side is it drilled?

Answers

July 18, 2011
QC
There is only the one 3/8" injection mold hole. It is located right in the center of the 17" wide face of the tank.
1 answers

if I mount this tank below deck what would I use for a filler?

dopey
kenn wa
July 04, 2011

if I mount this tank below deck what would I use for a filler?

Answers

July 06, 2011
John
For remote fill there are several options. For a fender fill type kit you may want to check out 458359 in conjunction with 458357. For vertical mount you could use 91676550 and fill cap number 91012521 or 6179040. The last two numbers are fill caps and will require a reducer hose or using one hose inside the other as a spacer for a tight seal when making the connection. Or you could use a flush mount fill neck such as 91076510 along with one of our billet fuel doors for a custom in trunk or bed application.
1 answers

does this come with a cap or do i need to buy the red assembly

May 08, 2011

does this come with a cap or do i need to buy the red assembly

Answers

May 14, 2011
Shane
This fuel cell does not come with the cap, a part number of 91076510 (Aircraft style cap and neck) would be a cap suited for the fuel cell.
1 answers

Where is the 3/8 pre-drilled hole at?

JLC
Pace, FL
March 10, 2011

Where is the 3/8 pre-drilled hole at?

Answers

March 15, 2011
Tech Support
The pre-drilled 3/8" hole in this unit is in the side in the center.
2 answers

what is involved in installing fittings? do you thread in to the tank it's self or ?

Fort Collins, CO
February 24, 2011

what is involved in installing fittings? do you thread in to the tank it's self or ?

Answers

May 04, 2011
FreterBuilt
Depending on how thick the tank is, that might work but the best way to do it is to use a bulkhead fitting with sealer capable of handing what ever type of fuel your going to run
March 01, 2011
Jason
It's not recommended to try and thread. The best way is to mount fittings from top using sealing washers with bulk head type fittings.
1 answers

How would I go about plugging the hole in the 9x24 side? Is there enough room to mount a remote filler on the top left between the mounting strap and the side of the cell? Also are the dimensions of the cell rounded up or rounded down (as in it actually measures 23 15/16 but they round up to 24 or its actually 24 1/8 and they round down to 24)?

Rob
Sioux Falls, SD
April 25, 2015

How would I go about plugging the hole in the 9x24 side? Is there enough room to mount a remote filler on the top left between the mounting strap and the side of the cell? Also are the dimensions of the cell rounded up or rounded down (as in it actually measures 23 15/16 but they round up to 24 or its actually 24 1/8 and they round down to 24)?

Answers

April 27, 2015
Eric
Expert
The hole can be plugged off with a plug such as 61760181 along with nut 61761881 and a sealing washer 6179061. You should be able to mount the filler in the corner between the strap mount and the edge of the tank as long as the filler is not overly large. The dimensions of this tank are actual measurements. All measurements have a tolerance range of +/- 1/16"
Page 1 of 1

You may also be interested in:

JAZ Products 250-008-NF Bottom Sump Fuel Cell, 8 Gallon
(Part #458108)
                        This bottom sump fuel cell is perfect for all race applications.  8 gallon capacity.  Flush mounted aerospace type filler neck.  Internal 2" sump with two AN 8 pick-up fittings.  An auxiliary AN 6 vent or return line is on the top.  Measures 20" long, 15" wide and 7-1/2" deep.

Tech Tip: Carefully determine the size of fuel cell needed. Depending on the capacity, a full fuel cell will generally weigh between 100 and 200 lbs. Buy the optimum size fuel cell to best accommodate weight bias and fuel consumption.

2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
(Part #91676550)
                        

These filler necks are manufactured from top-quality materials and are available in two sizes to best suit your application. You can count on these fuel cell filler necks to complete your performance fuel setup.

2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly 

This flange bolts to your fuel cell to permit attachment of a 2" I.D. filler hose.

This fill tube comes off of the flange at a 90 degree angle. 

  • O.D. of the flange is 4.88"
  • 6 mounting holes on a 4.36" bolt circle includes mount ring, bolts, and gasket
  • Filler neck is 2" O.D.
  • Aluminum construction

916-76550 (PDF)

 

 

JAZ Products 200-012-NF Polyethylene Fuel Cell, 12 Gallon
(Part #458112)
                        

JAZ makes the best polyethylene fuel cells on the market! This 100% seamless polyethylene cell features one -8 AN pick-up fitting and one -8 AN vent/tip-over valve fitting. These fuel cells contain a pickup tube. All cells are NHRA, IHRA, SCORE, and DIRT approved.

  • Seamless cross-linked polyethylene outer shell 
  • D-ring bail handle cap assembly
  • 360 degree mouting strap recesses
  • Does not include fuel cell safety foam

Item Details

17-1/2" Long, 16" Wide, 10" Deep
JAZ Products 892-016-01 Street Rod Fuel Cell, 16 Gallon, 25 x 17 x 9
(Part #4580458)
                        

Seamless, one-piece, polyethylene fuel cell. Install your own fittings. Fuel cell has one 3/8" hole pre-drilled due to the injection mold process (located in the center of the one side).

Item Details

25" long, 17" wide, 9" deep
JAZ Products 892-116-01 Street Rod Fuel Cell, 16 Gallon, 19 x 19 x 12
(Part #91076054)
                        

Seamless, one-piece, polyethylene fuel cell. Install your own fittings. Fuel cell has one 3/8" hole pre-drilled due to the injection mold process (located in the center of one side).

Note: Aircraft style cap shown in photo is sold separately of the fuel cell listed.

Item Details

19" long, 19" wide, 12" deep
Universal Aluminum Fuel Tank
(Part #91076051)
                        This 16 gallon tank was designed to be bolted to the floor of a pick-up box, but we're sure you can figure out other applications. It measures 28" long, 10" deep and 16" tall. It accepts the common 240 ohm full - 33 ohm empty sending unit and the filler neck measures 1-1/2". Ports on this tank are 3/8" NPT for the pickup and 1/4" NPT for the vent.
                    
45 Degree Fuel Filler Neck
(Part #91009080)
                        
Gas Filler neck is made of heavy aluminum and works with 1-1/2 inch and 2 inch hoses. Includes all hardware, seals, and adaptor.
  • Heavy aluminum construction
  • Hardware and seal included
  • Works with 1-1/2" and 2" hose with included adaptor
Aircraft Style Fuel Filler Neck & Cap
(Part #91076510)
                        

Flush-mount caps offer excellent aerodynamic performance, large fill opening and attractive appearance. Cap features a positive seal, flip-up 1/4-turn handle, and a chain to secure it to the gas filler neck. Includes cap, chain, fuel filler neck, gasket, and all hardware. Polyethylene cap is vented.

Hole in tank needs to be 3-3/4" for cap to sit flush.

Street Rod Fuel Cell -6 AN Pick-up w/ 14 Inch Hose
(Part #91076320)
                        

This fuel cell fuel pick-up kit includes a 14" length of blue rubber -6 AN push-on hose,  a -6 AN push-on hose fitting, -6 AN flared bulkhead fitting w/ nut, and HDPE sealing washers. Works great with our Street Rod Fuel Cells.

Hose Fitting Sizing Chart (GIF)

1-1/2 Inch Aluminum Remote Fuel Cell Filler Neck Flange Assembly
(Part #91676549)
                        

These filler necks are manufactured from top-quality materials and feature common hose size O.D. to best suit your application. You can count on these fuel cell filler necks to complete your performance fuel setup.

1-1/2 Inch Aluminum Remote Fuel Filler Neck Flange Assembly 

  • O.D. of flange is 4.88"
  • 6 mounting holes on a 4.36" bolt circle
  • Filler neck is 1-1/2" O.D.
  • Includes mount ring, bolts and gasket

This flange bolts to your fuel cell to permit attachment of a 1-1/2" I.D. filler hose. Aluminum construction.