These polyethylene fuel cells are the best cells on the market! This 100% seamless polyethylene cell features one -8 AN pick-up fitting and one -8 AN vent/tip-over valve fitting. These fuel cells contain a pickup tube. All cells are NHRA, IHRA, SCORE, and DIRT approved.
Note: To meet the IMCA Sport Compact rules regarding the 8 gallon fuel cells, fuel tank flapper valve 458-315 must be purchased and used in conjunction with the fuel cell shown here. Or purchase our 458-2080 with flapper valve already installed.
This bottom sump fuel cell is perfect for all race applications. 8 gallon capacity. Flush mounted aerospace type filler neck. Internal 2" sump with two AN 8 pick-up fittings. An auxiliary AN 6 vent or return line is on the top. Measures 20" long, 15" wide and 7-1/2" deep.Tech Tip: Carefully determine the size of fuel cell needed. Depending on the capacity, a full fuel cell will generally weigh between 100 and 200 lbs. Buy the optimum size fuel cell to best accommodate weight bias and fuel consumption.
This bottom sump fuel cell is perfect for all race applications. 8 gallon capacity. Flush mounted aerospace type filler neck. Internal 2" sump with two AN 8 pick-up fittings. An auxiliary AN 6 vent or return line is on the top. Measures 20" long, 15" wide and 7-1/2" deep.
Tech Tip: Carefully determine the size of fuel cell needed. Depending on the capacity, a full fuel cell will generally weigh between 100 and 200 lbs. Buy the optimum size fuel cell to best accommodate weight bias and fuel consumption.
The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent. Safety foam sold separately.
Note: To meet the IMCA Sport Compact rules regarding the 8 gallon fuel cells, fuel tank flapper valve 458-315 must be purchased and used in conjunction with the fuel cell shown here. Or purchase an IMCA approved cell with a flapper valve already installed.
Seamless, one-piece, polyethylene fuel cell. Install your own fittings. Fuel cell has one 3/8" hole pre-drilled due to the injection mold process (located in the center of the 9" x 24" side).
Note: Meets the IMCA Sport Compact rules regarding the 8 gallon fuel cells with flapper valve.