No items in Shopping Cart
These bolt-in fuel level sending units from Jaz Products feature a positive seal and a 2.3" O.D. bung. For GM gauges with 0-90 ohm range.
I have no negative comments about this product. Would recommend.
Get your questions answered by the community. Ask or answer questions below.
i have a set of dolphin guages in my roadster and i was wondering which sending unit would work with the fuel guage. also do i measure from top to bottom for the length of the unit or do i leave a little space from the bottom. thank you.
Asked on 6/13/2011 3:06:38 PM by the breeze 68 from keystone heights fl.
These fuel cell sending units are ideal for fuel cells where anti slosh foam sticks are used as they run a cylindrical tube float that won’t be hindered by the foam sticks. Normally you calculate the length allowing some space at the bottom of the tube to the bottom of the cell. We offer the senders for Stewart Warner/Auto Meter gauges requiring a 33-240 ohm rating and also for the GM gauges requiring 0-90 ohms. Verify depth of tank and ohm rating of gauge to obtain correct gauge operation.
Answered on 6/16/2011 4:50:09 AM by John from Speedway
Do you have a question about this product?