Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

JAZ Products 250-008-NF Bottom Sump Fuel Cell, 8 Gallon

SAME DAY SHIPPING! Order within the next 10 hours 34 minutes and receive same day shipping

Free Shipping Free Shipping
Specs
Sold in Quantity:
Each
Material Type:
Plastic
Color:
Black
Fuel Cell Cap Style:
Aircraft Flush Cap
Outlet Fitting:
-8 AN
MFG. Part #:
250-008-NF
Return Fitting:
-6 AN
Overall Height:
10.50
Overall Width:
15.00
Overall Length:
20.00
Capacity:
8.00
Notes
7.5" deep, 9.5" at sump area. Two 8-AN pick up fittings and one 6-AN vent/return fitting.
JAZ Products 250-008-NF Bottom Sump Fuel Cell, 8 Gallon

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

This bottom sump fuel cell is perfect for all race applications.  8 gallon capacity.  Flush mounted aerospace type filler neck.  Internal 2" sump with two AN 8 pick-up fittings.  An auxiliary AN 6 vent or return line is on the top.  Measures 20" long, 15" wide and 7-1/2" deep.

Tech Tip: Carefully determine the size of fuel cell needed. Depending on the capacity, a full fuel cell will generally weigh between 100 and 200 lbs. Buy the optimum size fuel cell to best accommodate weight bias and fuel consumption.

Customer Reviews

Rated 3 out of 5 by 2 reviewers.
RATING BREAKDOWN
2 reviews
5 Stars
0
4 Stars
1
3 Stars
0
2 Stars
1
1 Star
0
RECOMMEND THIS PRODUCT:

shaggy
Verified Purchaser

FUEL CAP PROBLEMS

July 16, 2014
Out of the box, it works fine. However, after it had gas in it the gasket on the lid is swolen and too big to fit back in. You have to work it around with your fingers to get it closed back up. Kind of a pain. Im only using pump gas so it should not have been an issue. I needed a cheap fuel cell to get by for a short time. I got exactly what i paid for.
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Merchant Response:

Speedway Motors Customer Service team has issued this customer a set of replacement gaskets at no cost. We apologize for the troubles experienced with this fuel cell. Please feel free to contact us at 800.979.0122 for further assistance or questions with this item, as we are happy to help in any way.
The Minister of Sinister
Verified Purchaser
Phx AZ

Fuel Tank Review

September 16, 2010
Does the job at a good price
Pros:
  • Well priced
  • Good economical fuel cell
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

4 questions : 4 answers

1 answers

Can this be wired to run in a 93 bmw 525i? Lookin to purchase a beater bmw, and try to build it up... Biggest problem it has is that it won't hold fuel. If I can fix that, I might buy the rig

fourxfun
April 24, 2014

Can this be wired to run in a 93 bmw 525i? Lookin to purchase a beater bmw, and try to build it up... Biggest problem it has is that it won't hold fuel. If I can fix that, I might buy the rig

Answers

April 25, 2014
EricM
This is a universal fuel cell and can be mounted into nearly any vehicle that it will physically fit into. You will have to get the fuel lines and connected as well as mount the fuel level sender in this tank if you want the fuel gauge to work.
1 answers

I need to install a filler neck and a cap what part #do i need Custom hot rod installation

Donnowgta
Angola ny
January 25, 2013

I need to install a filler neck and a cap what part #do i need Custom hot rod installation

Answers

January 28, 2013
Jason
Several options prevail on a neck and fill cap unit when replacing the aircraft style fuel fill cap on the cell. One example is a 45 degree neck under item number 458357 and a fender fill kit number 458359. The neck has a larger diameter bolt circle than the existing cap and would require drilling of the bolt holes in the cell. Another option would be a neck kit such as 6179060-4 and a fuel neck number 91676549.
1 answers

What is the weight of this tank ? Can I get this tank with an-6 fittings in the sump ?

Shag
November 10, 2012

What is the weight of this tank ? Can I get this tank with an-6 fittings in the sump ?

Answers

November 12, 2012
Jason
This cell is approximately 10 pounds. Sorry, we do not offer with AN6 ports but do offer reducer fitting part #472995008
1 answers

I need to install a fuel tank in the bed of my 1953 GMC. Will this work?

Fred
Perrin,Texas
August 11, 2011

I need to install a fuel tank in the bed of my 1953 GMC. Will this work?

Answers

August 12, 2011
John
This fuel cell has many uses and applications including the bed of a 1953 GMC pickup. The bottom is NOT flat so mounting provisions would need to accommodate the drop in the bottom. It is of only 8 gallon capacity and if more capacity is needed we offer many other poly fuel cells form 8 gallon up through 32 gallon in flat bottom style with top pickup hook ups. We also offer aluminum under the box fuel tanks for the ’47-’53 trucks under number 91076047.
Page 1 of 1

You may also be interested in:

Fuel Safe ITRV06 In-Tank Vent Valve, -6 AN Return
(Part #94053436)
                        Fuel Safe has long been the leader in Sprint car tanks and bladders. This vent valve goes in the fuel tank. For use with alcohol fuel only.
                    
Spike Chassis 951060 Fuel Tank Mounting Kit
(Part #9501060)
                        The fuel tank mount kit is fabricated from (4) 1/8" thick 4130 chromoly plate.
                    
T-Bucket Aluminum Fuel Tank, 14 Gallon Capacity
(Part #715750)
                        

This fabricated aluminum fuel cell is built for our 1923 T-bucket kits with a 20" pick-up box. Made from 5051 aluminum and tig welded for strength. Includes mounting tabs to make installation easy and it features a 240-33 ohm sending unit, flush mount fill neck, and AN6 fuel pickup, vent and return ports. Measures 9-1/2" x 12-1/4" x 30-1/4". Designed to be mounted to the left side which leaves room for your battery. Has a 14 gallon capacity. 

This tank will NOT clear the deck lid when used in conjunction with a channeled Speedway body. It will work great with flat floor bodies. Use tank 715-752 if you have a channeled body. 

  • 30-1/4" long
  • 12-1/4" wide
  • 9-1/2" tall
  • 14 gallon
  • Built for our 1923 T-Bucket kits with a 20" pickup box
  • Should be used with the un-channeled bodies
  • Features a 240-33 ohm sending unit
  • Feature a flush mount fill neck/cap
  • Designed to be mounted to the left side, which leaves room for your battery
Universal Aluminum Fuel Tank
(Part #91076051)
                        This 16 gallon tank was designed to be bolted to the floor of a pick-up box, but we're sure you can figure out other applications. It measures 28" long, 10" deep and 16" tall. It accepts the common 240 ohm full - 33 ohm empty sending unit and the filler neck measures 1-1/2". Ports on this tank are 3/8" NPT for the pickup and 1/4" NPT for the vent.
                    
Fuel Safe Fuel Level Indicator Stick
(Part #91011782)
                        

Fuel level indicator stick ideal for checking fuel level in all types of fuel tanks from sprint tanks to off road racing cells. Unique design allows you to insert fuel level stick into any fuel tank, fuel enters the clear fill tube via a one way check valve in the bottom of the stick. Withdraw the stick from the tank and check your fuel level against pre-set fuel level markings on the stick. Once you've determined the fuel level in the tank, simply dump the clean gas back in the tank.

  • No Mess!
  • No Spill!
  • Works in low light conditions!
  • 36" length Comes complete with adjustable fuel level markers that can be calibrated to your system
  • Endorsed by 3 time World of Outlaws Sprint Car Champion Sammy Swindell
Wehrs Machine Fuel Tank Breather
(Part #910452530)
                        

Now you can let your fuel tank breath. No need for line, this just attaches right to the cell and has built in anti-slosh flap.

  • Fuel Tank Breather
  • Anti-Slosh Flap
  • Choose -6AN or -8AN attachment size
  • Sold Individually
Earls 166016ERL Billet Fuel Cell Cap, 6-Bolt Flange
(Part #425166016ERL)
                        

Looking for an alternative to your stock fuel cell cap or maybe you need a fill cap for that custom oil tank or valve cover you are building? Well, look no further! Earl's has created a full line of Billet Fuel Cell Caps and Billet Fill Caps. Earl's caps are CNC machined from 6061-T6 billet aluminum and they feature a bright black anodize for great looks and corrosion protection. Each cap features a laser etched Earl's logo so you know it is quality product. The Earl's Billet Fuel Cell Caps are available for Jaz, Harwood, or RCI fuel cells. The 166016ERL kit features a 4.438 6 bolt flange and has a large 3 opening with an easy to grip screw on cap that utilizes an O-ring seal. Stainless steel hardware is included for an easy installation.

  • Features 4.438'' diameter flange
  • Large 3'' opening
  • Easy to grip screw on cap with o-ring seal
  • Stainless steel hardware included
  • Fits most JAZ style 6 bolt fuel cells
Polyethylene Fuel Cell Mounting Straps, 8 Gallon
(Part #4581208)
                        

Zinc-plated steel mounting straps available for 8 gallon seamless polyethylene fuel cells (non-steel can cell design).

NOTE: These straps do not work with steel can fuel cells.

Item Details

15" wide x 8-1/4" deep
For 458-208 & 458-108 Fuel Cells