Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Impact Racing Wizard SA10 Race Helmet


Tear Off Style:
Helmet Size:
Helmet Rating:
Snell SA2010

Share by Email


Click image to enlarge




Q & A

What's in the Box

This Made in the USA racing helmet from Impact Racing has all the features but is easy on the wallet. This Snell SA10 rated Impact Racing Helmet features interchangeable cheek peices for a custom fit for all racers. 

  • Wide eyeport design
  • Two adjustable forehead vents
  • Chin bar vent
  • .125" clear shield with tearoff posts
  • Uses common Style F tearoffs
  • Interchangeable cheek pieces for a custom fit, comes with standard pad only (extra cheek pads not included)
  • Has mounting points for Head and Neck restraints
  • SA10 rated 

You may also be interested in:

Impact Racing 10000000 Shield Installation Hardware Kit
                        These shield pivosts fit all Impact helmets. Sold in pairs.
Racing Optics 10209C F-Style Clear Banana Shape Speedstack 10 Tearoffs

Three stacks of ten laminated together gives same crystal clear view as one traditional tearoff. Can use multiple stacks of ten at one time. Unique design will keep dust and fog from accumulating between layers.  

Fits Simpson Shark, Super Shark (banana), Super Sport, VUDO, Invader, Valor, Sting Ray, Sidewinder, Evolution, K-10, Devil Ray, Impact Air Draft, Spider, Wizard, and Euro Sport. Peg Hole Distance: 12-3/4"

Racing Optics Tearoff Application Guide (PDF)

Speedstack Tearoff Guide

Speedway Tearoff Guide


Impact Racing 71000910 Helmet Bag
                        Impact's helmet bag is extra large to carry your helmet plus accessories and has a soft abrasion-resistant lining to protect your gear. It also features a durable nylon shell and 2/3 radius zipper for easy access. 
Helmet and Steering Wheel Hook, 1-3/4 Inch Tube Clamp

Helmet hanger and steering wheel hook. Clamps to 1-3/4" tubing.

Aluminum Helmet Hook with Tube Clamp
                        Universal mount helmet hanger makes storing your helmet fast and easy. Mount it in a location convenient for you and never worry about what to do with your helmet after the race or between heats. Includes tube clamp.
Impact Racing 10000009 Helmet Dryer
                        Portable, effective, bench top Helmet Dryer. Place on any level surface, position helmet over drying fan, plug it in, and it does the rest. 

Circulates a constant flow of low velocity ambient air throughout the helmet. Because there is no heat element, the dryer may run continuously without damaging helmet upholstery.

Low amp single speed fan. Molded rubber stripping around base protects surfaces.
Helmet Graphics - Drift
  • Vinyl
  • Available in red, blue yellow or orange
  • Applies to any style helmet
  • Helmet NOT included
Racing Helmet Graphics - Downforce
  • Can be easily removed and changed
  • Easy to apply
  • Affordable
  • Glossy finish
  • Single layer vinyl
  • Decals are printed then laminated to help protect print
  • Special material made to work on contours of helmet
  • Decal application won't damage helmet
Helmet Graphics - Apex
  • Can be easily removed and changed
  • Affordable
  • Glossy finish
  • Made from special material made to work with the contours of helmets
  • Printed on special material then laminated with an extra thick layer to help protect the print
  • When applied and removed correctly, decals will not harm helmet
Helmet Graphics - Loud Pedal
  • Can be easily removed and changed
  • Affordable
  • Glossy finish
  • Made from special material made to work with the contours of helmets
  • Printed on special material then laminated with an extra thick layer to help protect the print
  • When applied and removed correctly, decals will not harm helmet
  • Available in red, blue, orange and yellow
G-FORCE SA2010 CFG Full Face Racing Helmet, Carbon Fiber, S-XXL

A new take on the previous design from G-FORCE Racing Gear, the CFG is the new standard in functionality and style. From the outside in you will notice the difference. The outer contact shell is made with a ultra-lightweight, Carbon Fiber and composite blend which weighs 15-20% less than standard models. The shell is then coated with deep, rich protective clear coat outer layer. The rear of the helmet is accented with double ridge lines that add both style and strength to the CFG shell.

Reinforced mounting points for the Hans® Helmet Restraint Devices are built into the shell during production for added durability. The G-FLOW Ventilation System siphons air into the 6 slotted chin bar ports, around the interior and siphons out the 2 top and 2 rear vents to aid in cooling. An optically correct, .125" thick, ProFit Shield encloses the extra wide eye port opening and secures to the rubberized, eye port gasket to keep dust and dirt out. The ProFit Shield is held in place by two aircraft aluminum, wide-head bolts for easy change-out and removal. The thumb indention makes lifting the shield, even with gloves, simple and clean. The pivot kit contains 5 shield ratchet positions so that the driver can adjust to their liking. The front of the helmet is completed with a smooth-slope, auto racing chin bar which is different than a motorcycle, sharp-nosed design.

On the inside, G-FORCE Racing Gear has produced the most user friendly, comfortable helmet on the market. The heart of the CFG helmet is the, multiple density, ConeHead impact liner made to react to differing impact situations. The impact liner is covered by a soft knit, hypoallergenic, padded CoolTec, flame retardant liner for comfort and fit. A SpecFit Channel has been added to secure placement in the use of seeing or sunglasses. The chin strap in the CFG helmet is bolted to the shell with stainless hex-head bolts and is made from durable, flame retardant Kevlar® webbing. The CFG helmet carries the Snell SA2010 rating and at an average of 48 ounces, this is the lightest helmet in the GFORCE line. The G-FORCE Racing Gear CFG is the professional racer's choice for a clean look with unmatched quality and feel.

  • Lightweight Carbon Fiber Shell
  • Flame Retardant Liner
  • G-FLOW Ventilation System
  • Reinforced mounting points for Hans® Helmet Restraint Systems
  • Carbon Fiber gloss black finish with center stripe 
  • Choose from sizes: S, M, L, XL, and XXL

G-Force Helmet Sizing Chart (GIF)

Proper Fitting Guidelines (PDF)

Impact Racing 19300901 Clear Shield, Super Sport & Wizard Helmets

Uses "F" style tearoffs.

Fits: Spider, Super Sport, Super Sport Air & Wizard Helmets

Speedway F Style Tearoffs

Speedway Style F Short Tear-offs are the finest made.  Constructed of high strength 2 mil. plastic, they allow superior visbility.  Fits Simpson Shark, Super Shark, and Invader.

Peg Hole Distance: 12-3/4"
Tearoff Height: 3"
Tearoff Length: 16-1/2"

Speedway Tearoff Guide