Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Ididit 1120320010 Tilt Wheel Steering Column, 32 Inch, Plain

Specs
Material Type:
Steel
Overall Length:
32.00
Sold in Quantity:
Each
Finish:
Natural
MFG. Part #:
1120320010
Output Shaft Type:
1" DD
Shifter Location:
Floor
Column Tilt:
Yes
Key Location:
Dash
Collapsible:
No
Ididit 1120320010 Tilt Wheel Steering Column, 32 Inch, Plain
Product Video
Ididit 1120320010 Tilt Wheel Steering Column, 32 Inch, Plain

Click image to enlarge

Watch the videos below for an overview of the installation process and how to properly synchronize your ididit Tilt Wheel Steering Column.



Details

Reviews

Q & A

What's in the Box

Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube.
  • Self-canceling turn signals
  • 4-way flashers
  • Horn circuit
  • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
  • Plain steel finish

Measures 32" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

446-1232D Instructions (PDF)

Notes

  1. Column Dimensions (Link)
  2. Measures 7-5/8 from the end (steering wheel mount) to the end of the cone where the cone transitions into the 2 shaft.

Customer Reviews

This product has no reviews.

Product Q&A

3 questions : 3 answers

1 answers

will this colum fit a 1966 pontiac lemans/gto

bobmc
Florida, USA
October 20, 2014

will this colum fit a 1966 pontiac lemans/gto

Answers

October 21, 2014
EricM
Column number 4461232D could be used in your 66 Lemans but you will need to be aware that the column does not come with the dash mounting brackets or floor mount. The wiring plug in is the newer style but can still be adapted to your original harness. The output shaft is 1” double D and you would need to use a U-joint or the appropriate rag joint. The upper shaft accepts most GM steering wheels of 1969 and later. Main thing is the length of the column to put the steering wheel in the desired location and we suggest mock up before ordering.
1 answers

Will this column work in a 27 T Bucket and what length should I get 30" ???

Mad Cadder
February 26, 2012

Will this column work in a 27 T Bucket and what length should I get 30" ???

Answers

March 05, 2012
John
This could be used and 30” is the common length. In the Speedway T buckets we use a column with 1 ¾” O.D. and they work with the firewall mount brackets for the column. Number 715201 or 715202 is just one example that can be used.
1 answers

I need to know what steering column I need & what accessories I need for a 69 camaro

July 25, 2011

I need to know what steering column I need & what accessories I need for a 69 camaro

Answers

July 27, 2011
Zach
If your putting this in a 69 Camaro, I would recommend that you get Ididit's steering column meant for a 69 Camaro. We have the 67-68 Camaro columns(4461268), but they do not have an ignition switch on the column. None of the columns that we carry will have an integreated ignition switch.
Page 1 of 1

You may also be interested in:

Ididit 1120280010 Tilt Wheel Steering Column, 28 Inch, Plain
(Part #4461228D)
                        Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
  • Self-canceling turn signals
  • 4-way flashers
  • Horn circuit
  • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
  • Plain steel finish

Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

446-1228D Instructions (PDF)

Ididit 1120300010 Tilt Wheel Steering Column, 30 Inch, Plain
(Part #4461230D)
                        Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
  • Self-canceling turn signals
  • 4-way flashers
  • Horn circuit
  • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
  • Plain steel finish

Measures 30" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

446-1230D Instructions (PDF)

Ididit 1130330010 Tilt Wheel Steering Column w/ Shift, 33 Inch, Plain
(Part #4461333D)
                        Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
  • Self-canceling turn signals
  • 4-way flashers
  • Horn circuit
  • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
  • Plain steel finish

Measures 33" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

446-1333D Instructions (PDF)

Ididit 1120320020 Tilt Wheel Steering Column, 32 Inch, Chrome
(Part #4461232C)
                        Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These non-shift versions feature a 2" O.D. column tube. 
  • Self-canceling turn signals
  • 4-way flashers
  • Horn circuit
  • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
  • Chrome plated steel finish

Measures 32" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

446-1232C Instructions (PDF)

Grant 3196 3-Bolt Steering Wheel Adapter, GM Applications
(Part #4103196)
                        

This steering wheel adapter allows you to put an aftermarket 3-bolt steering wheel on a 1969-1994 GM, Ididit or Flaming River steering column. Horn button not included. Includes black metal cover, horn button spring, plunger spring, lead wire and three mounting bolts. Grant does not include a spacer as it is typically not needed for most applications, but if required, a simple washer will suffice.

Adapter Application Chart (GIF)

Note: When using this adapter, if the column has not previously had a steering wheel mounted, # 910-64049 will also be required.

- This item is no longer included from the vendor.

410-3196 Instructions (PDF)

Sweet Mfg U-Joint, 1 In DD to 3/4 DD, IDIDIT/Flaming River Column
(Part #91032401)
                        

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing.

These steering universal joints are CNC machined from aircraft steel to precision tolerances. The sealed needle bearing design will last ten times longer than a standard pin and block universal joint. The unique nickel plating prevents rust without the hassle of painting.

  • Full compliment bearings
  • Forged Vanadium steel yokes and u-joint
  • Highest quality for racing or street
  • Features needle bearing u-joints
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.

Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Horn Button Wire & Spring for GM Column
(Part #91064049)
                        Needed if you are using an aftermarket GM column and do not have the horn plunger wire and spring.