Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Ididit 2302270040 GM Van 2.5 Inch Steering Column Drop Mount 2 In Hole

SAME DAY SHIPPING! Order within the next 2 hours 54 minutes and receive same day shipping

Specs
Material Type:
Aluminum
Sold in Quantity:
Each
Finish:
Polished
Slot Width:
1.40
Inside Diameter:
2.00
Thread Length:
.85
Stud Diameter:
.25
Thread Pitch:
1/4"-20
Drop:
2.50
Material Thickness:
.47
MFG. Part #:
2302270040
Mounting Bolt Center to Center:
2.68
Garage Sale:
No
Notes
The column mount will swivels.
Ididit 2302270040 GM Van 2.5 Inch Steering Column Drop Mount 2 In Hole
Ididit 2302270040 GM Van 2.5 Inch Steering Column Drop Mount 2 In Hole

Click image to enlarge

Speeday Motors Logo
X
Ididit 2302270040 GM Van 2.5 Inch Steering Column Drop Mount 2 In Hole

Details

Reviews

Q & A

What's in the Box

Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM van steering columns (2" diameter).

  • For stock GM van steering columns (2" diameter)
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary. 

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

You may also be interested in:

Ididit 2303270040 GM Van 3.5 Inch Steering Column Drop Mount 2 In Hole
                        

Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM van steering columns.

  • For stock GM van steering column
  • 2 Inch diameter hole
  • 3-1/2 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

 

Ididit 2304270040 GM Van 4.5 Inch Steering Column Drop Mount 2 In Hole
                        

Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM van steering columns (2" diameter).

  • For stock GM van steering columns (2" diameter)
  • 2 Inch diameter hole
  • 4-1/2 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

 

Ididit 2305270040 GM Van 5.5 Inch Steering Column Drop Mount 2 In Hole
                        

Underdash Mounts are designed for several different applications. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished aluminum construction. These are for stock GM van steering columns (2" diameter).

  • For GM Van column
  • 2 Inch diameter hole
  • 5-1/2 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

Lokar ACA-1800 Billet Adjustable Column Arm Kit, GM Transmissions
                        

Simplify connecting your column shift to your transmission with a Lokar machined billet aluminum Adjustable Column Shift Linkage Kit. Works with all aftermarket GM style columns and most GM factory columns. Our rigid, clean line design allows the proper ratio adjustment between the transmission and the indicator on the column.

  • Billet aluminum offers rigidity
  • 3/4-48 spline designed for 3600 rotation allowing proper ratio
  • Both 3/8-16NC and metric 10-1.50mm threaded nuts for mounting electrical accessories
  • Kit includes all hardware, including column bushing and rod ends
  • "U-Cut-to-Fit" Stainless Connecting Rod
  • No threading necessary
  • Fits GM TH-350, TH-400, 700-R4, TH-200, 200-4R, 4L60, 4L60E and 4L80E transmissions

Ordering Idea:  You can use the Backup Light or Neutral Safety Switch Kit # 491-1400 with GM Column Shift Linkage, except for 4L60E and 4L80E transmissions.

Tech Tip:  If you don't have a direct line of sight between the column shift arm and the transmission shift arm, consider using column cable shift linkage # 491-1804 or # 491-1805