Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Ididit 3000313449 Steering Coupler, 3/4 Inch-36 Spline to 3/4 Inch DD

Price:$51.99
3000313449 - Steering Coupler - 3/4"-36 Spline to 3/4" DD
Price:
$51.99
EA
In Stock
Item #:
4463449
Ididit 3000313449 Steering Coupler, 3/4 Inch-36 Spline to 3/4 Inch DD
Click image to enlarge Click image to enlarge
No video at this time.
 

No-shift columns use 1" DD u-joints, while shift columns use 3/4"-36 spline u-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

Steering U-Joints and Couplers Application Chart (GIF)

Steering Box/Rack/Spline Chart (Link)

Spline Size (Link)

 

  • 4463449
    MFG. Part #
    3000313449
    Sold in Quantity
    Each
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
You May Also Be Interested In...
  • Sweet Mfg. Steering Coupler, 9/16 Inch 26 Spline to 3/4 Inch Round Non-Flex
    Sweet Mfg. Steering Coupler, 9/16 Inch 26 Spline to 3/4 Inch Round Non-Flex
    (1 Rating)
    Price: $14.99
    More Info
    Sweet Mfg. Steering Coupler, 9/16 Inch 26 Spline to 3/4 Inch Round Non-Flex
    x 
    							                        
    
                                                        Steel coupler is splined on one end and has a 3/4" round hole on the other.  
    When ordering, select applicable hole size/spline needed.
    Coupler = 2" L x 1.060" D
  • Ididit 1140550010 1955-56 Chevy Tilt & Shift Steering Column, Plain
    Ididit 1140550010 1955-56 Chevy Tilt & Shift Steering Column, Plain
    Price: $649.99
    More Info
    Ididit 1140550010 1955-56 Chevy Tilt & Shift Steering Column, Plain
    x 
    							                        
    
                                                        Make your 1955-1956 Chevy more comfortable to drive by installing a new Ididit steering column. These tilt columns with shift move the steering wheel back 2" while the non-tilt leaves it in the stock location. 
    Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. Column uses 3/4"-36 spline U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.
    446-1455 Instructions (PDF) 

     
  • Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 5-1/2 Inch Drop
    Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 5-1/2 Inch Drop
    Price: $68.99
    More Info
    Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 5-1/2 Inch Drop
    x 
    							                        
    
                                                        
    These billet polished aluminum column drops fit Speedway Nostalgia   columns, Hot Rod columns, our stainless steel columns, or your custom   1-3/4" O.D. column. For    these swinger  style drops, the  underdash nuts & bolts are    included. Each swinger  drop has two  screws on either side that when    unscrewed will detach the  lower half  of the mount to slide your  column   through.  A hinge at the upper end  allows multiple choices of    mounting angles.
    • 1-3/4 Inch diameter hole
    • 5-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included
    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.
     
  • Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 6-1/2 Inch Drop
    Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 6-1/2 Inch Drop
    Price: $68.99
    More Info
    Street Rod Steering Column Drop Mount, 1-3/4 Inch Hole, 6-1/2 Inch Drop
    x 
    							                        
    
                                                        
    These billet polished aluminum column drops fit Speedway Nostalgia   columns, Hot Rod columns, our stainless steel columns, or your custom   1-3/4" O.D. column. For    these swinger  style drops, the  underdash nuts & bolts are    included. Each swinger  drop has two  screws on either side that when    unscrewed will detach the  lower half  of the mount to slide your  column   through.  A hinge at the upper end  allows multiple choices of    mounting angles.
    • 1-3/4 Inch diameter hole
    • 6-1/2 Inch drop
    • Two screws on either side will detach to slide your column through
    • Polished aluminum construction
    • Nuts & bolts are included
    Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.
     
  • Ididit 3000315249 Steering Coupler-3/4 In. Double D to 1 In. Double D
    Ididit 3000315249 Steering Coupler-3/4 In. Double D to 1 In. Double D
    Price: $51.99
    More Info
    Ididit 3000315249 Steering Coupler-3/4 In. Double D to 1 In. Double D
    x 
    							                        
    
                                                        
    No-shift columns use 1" DD u-joints, while shift columns use 3/4"-36  spline u-joints. When using the original steering box, the input shaft  will need to be cut and modified into a 3/4" DD.
    Steering U-Joints and Couplers Application Chart (GIF) 
    Steering Box/Rack/Spline Chart (Link)
    Spline Size (Link)