Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Ididit 2305380040 1932 Ford 5 Inch Tilt Column Drop Mount 2.25 In Hole

SAME DAY SHIPPING! Order within the next 8 hours 58 minutes and receive same day shipping

Specs
Material Type:
Aluminum
Sold in Quantity:
Each
Finish:
Polished
Inside Diameter:
2.25
Drop:
5.00
MFG. Part #:
2305380040
Garage Sale:
No
Ididit 2305380040 1932 Ford 5 Inch Tilt Column Drop Mount 2.25 In Hole
Ididit 2305380040 1932 Ford 5 Inch Tilt Column Drop Mount 2.25 In Hole

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These column drops are angle cut to fit the 1932 Ford dash. Fits tilt steering columns with column shift (2-1/4" O.D. tube). For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

  • For tilt column, 1932 Ford dash
  • 2-1/4 Inch diameter hole
  • 5 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

 

You may also be interested in:

Ididit 2305280040 1932 Ford 5 Inch Steering Column Drop Mount, GM Van
(Part #4463528)
                        

These column drops are angle cut to fit the 1932 Ford dash. Fits GM van steering columns with 2" O.D. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

  • For GM van steering columns, 1932 Ford dash
  • 2 Inch diameter hole
  • 5 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

 

Ididit 2305180040 1932 Ford- GM Steering Column Drop Mount-5 Inch Drop
(Part #4463518)
                        

These column drops are angle cut to fit the 1932 Ford dash. Fits GM steering columns with 2-3/8" O.D. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

  • For GM column, 1932 Ford dash
  • 2-3/8 Inch diameter hole
  • 5 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

Ididit 2305580040 1932 Ford 5 Inch Steering Column Drop Mount 1.75 In.
(Part #4463558)
                        

These column drops are angle cut to fit the 1932 Ford dash. Fits steering columns with 1-3/4" O.D.  For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

  • For 1932 Ford dash
  • 1-3/4 Inch diameter hole
  • 5 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

 

Ididit 2305480040 1932 Ford 5 Inch Steering Column Drop Mount 2 Inch
(Part #4463548)
                        

These column drops are angle cut to fit the 1932 Ford dash. Fits tilt steering columns without column shift (2" O.D. tube). For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

  • For tilt column without column shift, 1932 Ford dash
  • 2 Inch diameter hole
  • 5 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

 

Speedway Universal Steering Column Mount, 2-1/4 Inch
(Part #91032632)
                        These versatile mounts install at any angle to solidly mount your steering column.
  • Available in 2.25" diameter
  • Choose from black or stainless steel