ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Ididit 2305580040 1932 Ford 5 Inch Steering Column Drop Mount 1.75 In.

SAME DAY SHIPPING! Order within the next 14 hours 27 minutes and receive same day shipping

Specs
Material Type:
Aluminum
Sold in Quantity:
Each
Finish:
Polished
Inside Diameter:
1.75
Drop:
5.00
MFG. Part #:
2305580040
Garage Sale:
No
Ididit 2305580040 1932 Ford 5 Inch Steering Column Drop Mount 1.75 In.

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These column drops are angle cut to fit the 1932 Ford dash. Fits steering columns with 1-3/4" O.D.  For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

  • For 1932 Ford dash
  • 1-3/4 Inch diameter hole
  • 5 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

 

Customer Reviews

Rated 4.5 out of 5 by 2 reviewers.
RATING BREAKDOWN
2 reviews
5 Stars
1
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Geedub
Verified Purchaser

Worked as advertised.

October 19, 2013
Needed to drop my column an additional inch. Found this on line, saw that it had the angle I needed for my 32 dash and the drop of 5 inches. The drop I removed did not have the removable bottom piece that this drop has...if I have to remove the column in the future it will be much easier.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Butch
Verified Purchaser
Wyoming, Mi.

Exactly what I expected, fit was great!

August 06, 2011
Well engineered, great fit.
Pros:
  • Easy To Use
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Ididit 2305280040 1932 Ford 5 Inch Steering Column Drop Mount, GM Van
(Part #4463528)
                        

These column drops are angle cut to fit the 1932 Ford dash. Fits GM van steering columns with 2" O.D. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

  • For GM van steering columns, 1932 Ford dash
  • 2 Inch diameter hole
  • 5 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

Item Details

2 Inch Diameter Hole
Ididit 2305180040 1932 Ford- GM Steering Column Drop Mount-5 Inch Drop
(Part #4463518)
                        

These column drops are angle cut to fit the 1932 Ford dash. Fits GM steering columns with 2-3/8" O.D. For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

  • For GM column, 1932 Ford dash
  • 2-3/8 Inch diameter hole
  • 5 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

Item Details

2-3/8 Inch Diameter Hole
Ididit 2305480040 1932 Ford 5 Inch Steering Column Drop Mount 2 Inch
(Part #4463548)
                        

These column drops are angle cut to fit the 1932 Ford dash. Fits tilt steering columns without column shift (2" O.D. tube). For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

  • For tilt column without column shift, 1932 Ford dash
  • 2 Inch diameter hole
  • 5 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.

 

Ididit 2305380040 1932 Ford 5 Inch Tilt Column Drop Mount 2.25 In Hole
(Part #4463538)
                        

These column drops are angle cut to fit the 1932 Ford dash. Fits tilt steering columns with column shift (2-1/4" O.D. tube). For these swinger style drops, the underdash nuts & bolts are included. Each swinger drop has two screws on either side that when unscrewed will detach the lower half of the mount to slide your column through. They have been buffed so well that there is no noticable gap between the two pieces! Each piece was manufactured in the United States by ididit. A hinge at the upper end permits an infinite choice of mounting angles. Polished billet aluminum construction.

  • For tilt column, 1932 Ford dash
  • 2-1/4 Inch diameter hole
  • 5 Inch drop
  • Two screws on either side will detach to slide your column through
  • Polished aluminum construction
  • Nuts & bolts are included

Note: Column drop lengths are measured from the centerline of the column to the column drop mount surface.

Note: Shift columns will require either a 2-1/4" hole or a 2" hole depending on the manufacturer.  Non-shift columns require a 2" hole.  Please double check application as necessary.