(0)
Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image

Hyperco Chrysler Composite Leaf Springs

Price:$314.99
Sale:$309.99
Click image to enlarge Click image to enlarge
No video at this time.
 

Hyperco Composite Leaf Springs are significantly lighter than steel, retain their design arch, and provide more side bite off the corner. The Hyperco CLS is truly a cost effective, high performance alternative to steel. It allows teams running leaf springs to be consistent night after night without having to constantly measure, monitor and change their springs for loss of arch / sagging. The initial cost is a value based on the incredible service life. Leave the steel on the street, hook up with the Hyperco CLS performance advantage.

  • On average 70% lighter than steel
  • No sagging or chassis inconsistency
  • More durable = greater value
  • Quicker off the corner compared to steel springs

Composite Spring Dimensions (GIF)

  1. U-bolts should never come in contact with the composite portion of the leaf spring. Hyperco recommends a heavy gauge rubber or plastic hose be fitted over the U-bolts to ensure that there is no metal to composite contact.
  2. U-bolts should be tightened evenly to a torque value of 80 to 100 ft. lbs., or until the center mounting plate yields/deflects. The torque value should be checked on a regular basis to ensure adequate and consistent clamping force.
  3. The mounting pad must extend a minimum of ¼" past the steel mounting plate.
  4. Additional protection for the composite leaf can be obtained by wrapping all exposed surfaces with high quality duct tape.
  5. When installing springs it is important to check the alignment. The inner sleeves must not bind inside the spring bushings on both the front and rear mounting brackets.
Reviews for Item #: 44410203
Be the first to review this product. Write a Review
 

Questions and Answers for Item #: 44410203

Get your questions answered by the community. Ask or answer questions below.

1 Question | 1 Answer
Displaying Questions
Processing

Q:

What is the length: bolt hole to bolt hole? How wide is the spring?

Asked on 9/17/2011 6:37:12 PM by 1963RamblerWagon from Denton, TX

Answers (1) Know the answer? Answer this question
Displaying Questions

Do you have a question about this product?

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Hyperco Composite Chrysler Leaf Spring
Price:
$314.99
EA
Sale Price:
$309.99
In Stock
Item #:
44410203
Item Details:
Front Bolt: 0.625"
Rear Bolt: 0.5"
Arch: 4.5"
Rate: 175#
 
(0 Rating)
Hyperco Composite Chrysler Leaf Spring
Price:
$314.99
EA
Sale Price:
$309.99
In Stock
Item #:
44410231
Item Details:
Front Bolt: 0.625"
Rear Bolt: 0.5"
Arch: 4.5"
Rate: 200#
 
(0 Rating)
You May Also Be Interested In...