Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Howe Racing 22412 60-66 Chrysler K727 Style Lower Ball Joint/Alum Cap

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

NOT IMCA Approved.

Precision Ball Joint Illustration

Precision Lower Ball Joint Application Chart

Application

Fits:

  • Most stut cars, 1971-1976 Impala spindles and most wide-type dirt cars.
  • Speedway "strut-type" tubular lower control arms such as 910-343-16, -17, -18, -19.
  • Aluminum adjuster makes this ball joint lighter than steel, but not IMCA legal.

Specs

Lower 917-22412

  • Screw-in style and cross reference with MOOG #K727.

Item Details

Moog # K727
1960-66 Chrysler - Aluminum Cap

You may also be interested in:

Howe Racing 22412S 1960-66 Chrysler K727 Style Lower Ball Joint/Steel Cap
                        

Howe Precision Ball Joints offer the precision of a spherical bearing with the misalignment range of a ball joint. Their rugged steel housings will withstand impacts that can destroy other ball joints. Plus, even if you manage to damage the joint, they are fully rebuildable. The alloy steel ball studs are process coated for low friction and long wear. You will feel the difference in smooth travel and easy steering effort.

IMCA Approved.

Precision Ball Joint Illustration

Precision Lower Ball Joint Application Chart

Howe Racing 22440 Repl Ball Joint Stud for 917-22412 K727 Style
                        

The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

  • 1960-1966 Chrysler Imperial

For Howe Precision Ball Joints ONLY.

Steel Lower Ball Joint Sleeve, K727 Style 1960-66 Chrysler
                        

This plain finish, mild steel ball joint sleeve is used to build or repair control arms. Screw in style.

AFCO 20036LF Low Friction 1960-66 Chrysler-Type Lower Ball Joint
                        

AFCO Low Friction Ball Joints are designed with 2 ft. lbs. of resistance, the force required to move the stud of the ball joint.  Compare this with standard replacement joints, with as high as 50 ft. lbs. of resistance.  A difference you can feel!

It is critical to handling that suspension components be as free as possible to move.  Low friction ball joints allow the suspension to give rather than allowing the tire to bounce over rough surfaces.  Low tire pressures magnify the need to minimize friction in the suspension. 

  • Precision machined to tight tolerances, providing consistent resistance throughout the travel of the ball joint to deliver consistent performance
  • Improves weight transfer and Frees up suspension for more consistent, repeatable chassis tuning
  • Removes suspension rigidity and allows shock and spring to have more precise wheel control
  • Adjustments are controlled more effectively by the shock and spring instead of the tire which improves traction
  • Provides more accurate set-ups during vehicle scaling
  • Stock appearing, Meets or exceeds standard ball joint strength
  • Lower input steering efforts and faster steering wheel return

Checking Ball Joint Wear (PDF)

Howe Racing Enterprises 22399 Ball Joint Boot
                        These protective ball joint boots fit both upper and lower joints.
                    
Howe Racing 22430 Repl Ball Joint Stud for 917-22413 K6141 Style
                        

The alloy steel ball studs are process coated for low friction and long wear.  You can feel the difference in smooth travel and easy steering effort.

The rugged steel housing will withstand impacts that would destroy a standard automotive ball joint; typically only the ball stud will need replacement. Our standard ball studs are dimensionally the same as OEM and different length ball studs are available to allow easy geometry changes.

  • 1971-1976 Chevy Impala 

For Howe Precision Ball Joints ONLY.

Speedway 1960-66 Chrysler K727 Style Lower Ball Joint
                        

Lower screw-in ball joint fits most strut cars, 1960-66 Chrysler, 1971-1976 Impala and most wide-type dirt cars. Also fits Speedway "strut-type" tubular lower control arms such as 910-343-16, -17, -18, -19.

  • The measurements for the wrench area is 2.125"  
  • The flat area and the round area is 2.320."
  • The threaded area on the ball joint is 2.025."