ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Holley 12-834 1958-1976 Small Block Chevy Street Fuel Pump

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Overall Height:
3.75
Sold in Quantity:
Each
Finish:
Chrome
Thread Pitch:
1/4" NPT
Mounted Length:
4.25
Outlet Fitting:
1/4" NPT
Flow Rating:
80 GPH
Gasket(s) Included:
Yes
Hardware Included:
No
MFG. Part #:
12-834
Fuel Pump Type:
Mechanical
Holley 12-834 1958-1976 Small Block Chevy Street Fuel Pump
Holley 12-834 1958-1976 Small Block Chevy Street Fuel Pump
Holley 12-834 1958-1976 Small Block Chevy Street Fuel Pump
Holley 12-834 1958-1976 Small Block Chevy Street Fuel Pump
Holley 12-834 1958-1976 Small Block Chevy Street Fuel Pump
Holley 12-834 1958-1976 Small Block Chevy Street Fuel Pump

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These all-new (not rebuilt) mechanical fuel pumps from Holley have a 7-1/2 psi shut-off pressure and deliver 80 GPH. The adjustable lower housing permits fuel ports (1/4" NPT) to be rotated for best fuel line access. Pump fittings not included and offered separately. These pumps are a flash chrome and not show quality.

  • High Output Fuel Flow
  • Flows 80 GPH Free Flow
  • Shutoff Pressure Pre-set 7.5 PSI
  • Fuel Pressure Regulator is Not Required
  • Heavy Duty Construction For Continuous High RPM Operation
  • Fuel Body Casting Can Be Rotated to Accommodate Various Plumbing Situations
  • Inlet & Outlet Tapped For 1/4" NPT

Holley Pump Tech Info (PDF)

Customer Reviews

Rated 3.8 out of 5 by 4 reviewers.
RATING BREAKDOWN
4 reviews
5 Stars
2
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
1
RECOMMEND THIS PRODUCT:

BigDoggy
Minot, ND, USA

Fuel pump

September 26, 2013
Replaced existing fuel pump. Liked that I could clock the position of the pump to accommodate my fuel line connections. Highly recommend.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Chopped sled
Verified Purchaser
Wa State

Terrible chrome finish

March 25, 2012
The chrome on this pump is the worst I have ever seen. I know it's flash chrome, what I expected, but too ugly to bolt on. I'll save it for a back up part on road trips, nothing else. Very disappointed with the finish.
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

Bobby
Verified Purchaser
Lakeside, Arizona

will buy again

November 19, 2010
Beautiful , just what I wanted!!!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Russ B
Millbrae, CA

adjustable inlet/outlet position great

November 05, 2010
good for tight chassis width installations where a non-standard location for inlet and outlet positions will ease fabrication of fuel lines. A continuously adjustable location would be nicer than the 60 degree minimums; but for me the 60 degree change made all the difference I needed.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

2 questions : 2 answers

1 answers

will this work on any chevy 350 that requirs a mechanical fuel pump 1976 c10 1983 305

DrStick
Minnesota
April 03, 2014

will this work on any chevy 350 that requirs a mechanical fuel pump 1976 c10 1983 305

Answers

April 04, 2014
EricM
Yes this fuel pump will work on your Chevy 350 engine.
1 answers

Will this work with a SBC retro fitted rollercam, I read the pushrod can fail if its the wrong type.

s
new York
April 21, 2015

Will this work with a SBC retro fitted rollercam, I read the pushrod can fail if its the wrong type.

Answers

April 21, 2015
Eric
Expert
For a billet roller camshaft you would need a fuel pump pushrod with a bronze tip such as 91511985. If you have a cast roller camshaft the bronze tip pushrod is not necessary and not recommended. Most hydraulic roller cams that are intended for street use will be a cast material an will work fine with the stock fuel pump pushrod. Check with your camshaft manufacturer if you are uncertain as to the material of your cam and for their recommendation.
Page 1 of 1

You may also be interested in:

Professional Products 10102 Street Rod Fuel Filter
(Part #91011770)
                        

This deluxe fuel filter features a replaceable paper filter, an aluminum painted top and a chrome filter housing. It is 5-3/8" tall by 3-1/4" diameter and has 3/8" NPT inlet and outlet. 

For carbureted systems only. Flows up to 90 GPH @ 7 PSI and filters particles down to 10 microns.

910-11770 Instructions (PDF) 

Small Block Chevy Fuel Pump Seals
(Part #91011853)
                        

This seal was originally developed to contain lubrication inside the fuel pump cavity in order to lubricate the pump arm, but it also allows the pump to deliver cooler fuel to the carburetor. Uses a molded neoprene seal bonded to an alloy plate to seal around the pump arm. A special insulating gasket and sleeved, insulated bolts also cut down on the engine heat transferred to the pump to further reduce fuel temperature. 

  • 91011853-Hol
    • Fits old style Holley/Edelbrock pumps w/ 1/2" NPT ports on opposite end
  • 91011853-Car
    • Fits new style Holley/Carter fuel pumps
Moroso 65750 Lightweight Fuel Pump Pushrod
(Part #54565750)
                        

This lightweight fuel pump push rod helps prevent fuel pump arm float at high RPM and subsequent fuel starvation. Fits both Small Block Chevy (SBC) and Big Block Chevy (BBC).

  • For use in Drag, Oval Track and Street-Performance applications

 

Edelbrock 17000 Victor Billet Small Block Chevy Mechanical Fuel Pump
(Part #32517000)
                        

Edelbrock Victor Series billet aluminum mechanical fuel pumps are for high performance racing applications. The 5/8"-18 inlet and outlet come with -8AN fittings installed to provide increased flow over street fuel pumps, and the base can be rotated to allow for various fuel line configurations. These billet aluminum pumps produce 8.5-9 psi and require a pressure regulator.

  • For use with gasoline or alcohol
  • Flows up to 170 GPH
  • Superior materials: 100% machined from billet 6061-T6 aluminum
  • Quality construction CNC-machined to exact tolerances
  • Tough design with stronger mount for increased durability
  • Clear anodized finish with the Edelbrock logo laser engraved on the pump body
  • Clockable lower housing can be rotated for best inlet/outlet alignment
  • -8 AN fittings installed
  • Includes mount gasket and bolts

325-17000 Instructions (PDF)

Item Details

Gasoline or Alcohol - 170 GPH
Chrome Fuel Filter for 5/16 Inch Hose
(Part #6174506)
                        

Compact, chrome steel fuel filter. Can be unassembled for easy cleaning. Features a sintered metal filter.

Not for use with fuel injection.

Chrome Fuel Filter for 3/8 Inch Hose
(Part #6174512)
                        

Compact, chrome steel fuel filter. Can be unassembled for easy cleaning. Features a sintered metal filter.

Not for use with fuel injection.

Fuel and Oil Line Hose Nipple Fitting Kit, 3/8 Hose to 1/4 NPT
(Part #91023100)
                        This hose end pipe fitting kit includes two brass fitting adapters, 1⁄4" NPT pipe thread to 3⁄8" I.D. hose, and two stainless hose clamps. Kit is very useful when hooking up fuel pressure regulator fittings, fuel block fittings, fuel pump fittings, and carburetor fittings.