Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Hitachi Enforcer Chevy Mini Starter, 1.0 kW

SAME DAY SHIPPING! Most orders ship within 24 hours.

Free Shipping Free Shipping
Specs
Sold in Quantity:
Each
Garage Sale:
No
Overall Height:
4.75
Overall Width:
3.00
Overall Length:
7.00
Weight:
7.50
Hitachi Enforcer Chevy Mini Starter, 1.0 kW

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

There is no starter smaller and lighter than this 100% brand new Hitachi starter. This starter can be rotated 360° and its compact size allows it to fit where no other can. For 153 or 168 tooth flywheels and straight bolt patterns.

  • Up to 10:1 compression
  • 1.0 kw motor
  • 6:1 gear reduction
  • 7-1/2" lbs.
  • Includes ARP bolts and shims

Specs

  • 7" long (not including the drive)
  • 4-3/4" tall (including solenoid)
  • 3" diameter motor

Customer Reviews

Rated 4.7 out of 5 by 3 reviewers.
RATING BREAKDOWN
3 reviews
5 Stars
2
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

ModelAMark123
Verified Purchaser
Wisconsin, USA

Compact is what I needed, and this worke

August 20, 2013
Good fit,shinny and, no problems. I just put it in and it works. Ask me again in three years, and you might get some useful information on reliability.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

JC
Verified Purchaser
Denver, CO

Hitachi Enforcer Chevy Mini Starter, 1.0

September 07, 2012
I had one of these already as it was installed when i bought the car. I had the car for 5 months and the Hitatchi starter died (was extremely hot- guessing heat wash, which is what these are supposed to not have issues with). I replaced it with another and so far so good.
Pros:
  • Easy To Install
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

cornfedbill
Verified Purchaser
Brighton, Michigan

Hitachi Mini Starter, S/B Chevy

December 19, 2010
This is an excellent starter. It is very light and compact. It resolved a problem packaging big headers and a 168 tooth flywheel on my '55 Belair where a stock GM starter would not fit.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

1 questions : 1 answers

1 answers

The 7" measurement does or does not include mounting plate? I do see it says not including drive, and the drive is sticking out however Im looking for overall full mounting plate to back measurement

Bryne
Hesperia CA
July 06, 2015

The 7" measurement does or does not include mounting plate? I do see it says not including drive, and the drive is sticking out however Im looking for overall full mounting plate to back measurement

Answers

July 07, 2015
Eric
Expert
The 7" measurement is from the back of the pinion gear to the front of the starter motor. The pinion gear protrudes out 7/16" from the mounting block so the starter is 6 9/16" from the back of the mounting block to the front of the starter motor.
Page 1 of 1

You may also be interested in:

Speedway Chevy Compact Starter Combo, 1.4 kW
(Part #91067400)
                        

Get our 1.4 kW compact mini starter at the normal price and we throw in a quick disconnect wiring harness and an aluminum heat shield.

  • High-torque, 1-1/2 HP high output, gear reduction motor
  • Spins engine over faster, with 50% more cranking torque and LESS amp draw than a stock starter
  • Compact, offset design gives more header and chassis clearance
  • Works with 153 or 168 tooth flywheels on Chevy V8 or 90° V6
  • Works on blocks with angle bolt starter flange by drilling and tapping one hole

910-67400 Instructions (PDF)

Speedway Chevy Lightweight Starter, 1.0 kW
(Part #91067409)
                        

Feather light, but built to last! Unique gear reduction design is compact but can be rotated 360° and works with 153 and 168 tooth flywheels. Fits Chevy with straight bolt pattern.

  • Weighs 7-1/2" lbs
  • Up to 10:1 compression
  • Includes mounting bolts shims
  • 3" diameter motor
Speedway Chevy Mini Starter, 1.4 kW, Plain
(Part #91067440)
                        High-torque, 1-1/2 HP high output motors and gear reduction drive design spins the engine over faster, with 50% more cranking torque and LESS amp draw than a stock starter! Compact, offset design gives more header and chassis clearance. Perfect for high compression or supercharged Chevy engines. 

Straight mount 6061-T6 aluminum mounting plates work with 153 or 168 tooth flywheels on Chevy V8 or 90° V6. Works on blocks with angle bolt starter flange by drilling and tapping one hole. 

910-67440 Instructions (PDF)

Item Details

180 ft. lbs.
Speedway Chevy Mini Starter, 2.0 kW, Plain
(Part #91066258)
                        High torque, high output motors and gear reduction drive design spins the engine over faster, with 50% more cranking torque and LESS amp draw than a stock starter! Compact, offset design gives more header and chassis clearance. Perfect for high compression or supercharged Chevy engines. 

Straight mount 6061-T6 aluminum mounting plates work with 153 or 168 tooth flywheels on Chevy V8 or 90° V6. Works on blocks with angle bolt starter flange by drilling and tapping one hole. 

Only 1-1/2 lb. heavier and 1" longer than the 1.4 kW version.

From the centerline of the mounting bolt holes to the end of the starter is 7-3/4" 

Chevy Mini Starter Installation Instructions (PDF)

Item Details

190 ft. lbs.
Speedway Chevy Starter
(Part #91066300)
                        

Compact 3 horsepower Speedway Starter by Stephenville Electric. New proprietary design to crank those high compression and big cubic inch Chevy engines. Each starter is dyno tested.

Includes shims and mount bolts. Fits both SBC and BBC engines.