Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Heavy Duty Rear 4-Link Kit

Price:$349.99
Heavy Duty 3/4" Rod End Rear 4-Bar Kit
Price:
$349.99
EA
In Stock
Item #:
91649069
Heavy Duty Rear 4-Link Kit
Click image to enlarge Click image to enlarge
No video at this time.
 
This heavy duty adjustable rear four-link kit is just the ticket for heavy or serious horsepower applications. Includes frame brackets, rear axle brackets, upper and lower shock brackets, 3/4” rod ends, jam nuts and 14” threaded 1” o.d. tubes, bolts and washers.

Four bar rear suspensions will require the use of a panhard bar or watts type component to control side to side movement.

  • Axle Bracket Height:  11-5/8"
  • Axle Bracket Width:  4-1/8"
  • Axle Bracket Thickness:  .172"
  • Frame Bracket Height:  11-5/8"
  • Frame Bracket Width:  4-3/4" max
  • Frame Bracket Thickness:  .172"
  • Max Assembled Length, Bracket-to-Bracket:  24"
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
Our Techs also Suggest the Following:
Panhard Bar Kit
Price:
$69.99
KT
In Stock
Item #:
91649022
BOLT-ON REAR PANHARD BAR
Item #:
91049800
You May Also Be Interested In...
  • Watts Link
    Watts Link
    (1 Rating)
    Price: $69.99
    More Info
    Watts Link
    x 
    							                        
    
                                                        Gives you better control than a Panhard Bar. Perfect for coil spring or coil-over rear suspension. For chassis widths of 46" or less. Threaded approximately 2 “ on each end. 
    Kit includes:
    • mounting brackets
    • rod (19" threaded for 1/2" rod ends)
    • jam nuts
    • all required hardware 
    Watts Link Illustration
  • Universal Rear Sway Bar Kit
    Universal Rear Sway Bar Kit
    Price: $359.99
    More Info
    Universal Rear Sway Bar Kit
    x 
    							                        
    
                                                        
    Universal rear sway bar fits frame up to 45" wide, which makes it ideal for many 1928-1948 street rod applications. Both the 1-1/4" diameter shaft and the 2" O.D. weld-in frame tube can be shortened for narrower frames. The billet aluminum arms are not splined - they are held on by drilling the shaft and inserting a bolt all the way through the end of the shaft.
    Includes bushings, 3/8" adjustable rod ends and all hardware. Welding required.