Head Mount Power Steering Pump Bracket for Short Water Pump
Click image to enlarge
Q & A
What's in the Box
ApplicationFits Profile/Sweet type pump and the Gen II type pumps.
You may also be interested in:
Red Line 30404 Power Steering FluidMore Info
KSE Racing Products KSM1086 KSE Elixer Power Steering FluidMore Info
Power Steering Pump Combo, -8 AN FittingsMore Info
Lubrication Engineers 7500 LE Power Steering Fluid, 1 Qt.More Info
Block Mount Power Steering Pump Bracket for Short Water PumpMore Info
AFCO 37190 Small Block Chevy Power Steering Pump Mount (Bolts to Head)More Info
Speedway Steel Power Steering Pump V-Belt Pulley AN8 InletMore Info
Sweet Mfg. 30560331 Aluminum Power Steering Pump with PullyMore Info
Power Steering Hose Kit, -8 AN ReservoirMore Info
Red Line Oil’s team of chemists and blenders formulate fully-synthetic oils and chemically-advanced additives using only the world’s finest base stocks. This makes Red Line Oil the premium product on the shelf. It’s not designed to be the cheapest – it’s built to be the best. Rather than cutting cost by blending into polyalphaolefin base stock for it’s motor oil, Red Line Oil only uses superior polyester-based products – resulting in lubricants that are extremely stable at high temperatures while providing superior film strength at lower viscosities where more power can be produced.
The world’s top racing team and most discriminating enthusiasts use Red Line Oil products exclusively. There may be a different sponsor on the outside, but chances are it’s Red Line Oil on the inside.
- Helps prevent high-temperature steering fade
- Helps prevent difficult low-temperature steering
- Greater heat resistance
- Helps prevent high-temperature boil-over
- 50% greater high-temperature viscosity
- 1/5th the high-temperature evaporation
- Helps prevent leakage and squealing
- 1/4th the oxidation of petroleum power steering fluids
- Compatible with petroleums and synthetics
- Also satisfies API 75W GL-4 gear requirements
With the frequency and pressure of racing power assist being twice that of stock power systems, it’s obvious that stock power steering fluid is not adequate. Would you use 10W30 motor oil in a racing engine? Of course not! That is why KSE has developed a power steering fluid designed to handle the stresses of racing power steering.
The Elixer has a higher viscosity index, anti-foaming, anti-wear, and anti-oxidation capabilities to handle the racing power steering stresses. The Elixer will minimize power assist fade, low-corner- speed assist loss, and decrease heat generation. We also have made the color a “cool” blue to help in identifying oil leak origins.
The Elixer completes the total racing power steering system. When it comes to steering, go with a name you can trust...KSE!
Power steering pump combos include:
- Sweet Mfg. cast iron power steering pump
- Block mount bracket with hardware
- Standard weight aluminum reservoir tank
- Tank mounting bracket
Reservior bracket can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.
910-32912 Instructions (PDF)
This power steering fluid is compatible with all racing power steering systems. Non-foaming, even at high temperatures. The best we have found. 1 quart.
- Lowers operating temperatures
- Controls rust and corrosion
- Foam prevention
- Seal compatibility
- Reduces pump & gear wear
- Resists oxidation
- Contains MONOLEC, LE's exclusive wear-reducing additive
These power steering pump brackets are for short water pumps. For mounting Profile or Sweet Pump to small block Chevy V8. Bolt kit included. Anodized purple.
- CNC-machined lightweight aluminum
- Mounts racing type power steering pumps
- Fits Small Block Chevy V8
Cast iron power steering pump has aluminum V-belt pulley. These pulleys are popular for use on late models and IMCA modifieds. Comes with AN6 pressure fitting. Order AN8 or AN10 supply fitting. These power steering pumps have a pressure relief valve.
Mounting brackets available for head or block mounting.
Cast iron power steering pump has aluminum V-belt pulley. These pulleys are popular for use on late models and IMCA modifieds. Comes with -6 AN pressure fitting and a -10 AN supply fitting. These power steering pumps have a pressure relief valve.
- Operates at 1000 psi
- Minimum operating speed of 1500 RPM
- Mounting brackets available for head or block mounting.
This power steering hose kit is just what you need to plumb your driver's side remote reservoir power steering set up. The AN 8 hose kit includes 4' of AN 6 high pressure hose, 5' of AN 6 blue aeroquip hose and 3' of AN8 blue aeroquip hose. One 45° AN 6 and one 90° AN 6 fittings are included as well as an AN 6 straight brass push-on and one AN 6 and two AN 8 90° push-on hose ends.
NOTE: Does NOT contain steering box fittings