ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

Harmonic Balancer Pull and Installer

SAME DAY SHIPPING! Order within the next 58 minutes and receive same day shipping

Harmonic Balancer Pull and Installer

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Installs and removes engine balancer quickly and easily without causing damage. Features a roller thrust bearing which allows the drive nut to rotate freely so the balancer is pressed on or pulled off smoothly and evenly.

Bolts of various lengths in sizes of 1/4, 5/16, 3/8, and 8mm are included along with adapters to 7/16, 1/2, 9/16, 5/8, 3/4 and 12, 14, and 16mm.  Kit works on most domestic vehicles and includes the 78 and up metric chassis cars.

Insert adapters are included to fit most popular engines including Chevrolet, Ford, Mopar, KB Hemi, Pontiac, Oldsmobile and Buick. 

Customer Reviews

Rated 4.5 out of 5 by 2 reviewers.
RATING BREAKDOWN
2 reviews
5 Stars
1
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

dennis23
Verified Purchaser
Des Moines, Ia, USA

One slick tool

September 23, 2014
I had another installer I used but a piece came up missing for it so I needed a new puller / installer an went with this one from Speedway. This does so much more than the old one did and is easier too. I used it on a BBC for my 31 Ford Sedan and couldn't be happier.
Pros:
  • remove & install with ease.
Cons:
  • none so far.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Flattie Man
Salt Lake City, Ut

I would buy this product again

May 28, 2010
It a great tool, but I had to come up with my own bolts to remove the balancer from a flathead engine I am building, all the bolts for pulling off the balancer have course thread. I had to come up with fine thread bolts.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Small Block Ford 302-351 4-Bolt Balancers
(Part #91015334)
                        

This Small Block Ford balancer features billet steel forgings, a durable elastomer bond. The 50 oz. balance factor is common to 1981-95 302.

Has a 4-bolt pulley hub.  Has a anodized black finish.

Professional Products Small Block Ford Harmonic Balancers
(Part #91015365)
                        

These PowerForce series balancers from Professional Products are available in 28 oz. or 50 oz. balance. They both measure 6.4" in diameter, are 3" in total length, and are marked to 40 degrees at three locations. Plus, they feature both 3 and 4 bolt pulley holes, which allows the use of late model serpentine drive systems on early engines if desired. Counter weight is removable for zero balanced cranks. Fits most 260/289/302/351W/5.0L Ford engines.  6500 RPM max limit.

See Notes tab for spacer requirements.

28 oz. Balancer (S/B Ford V8 1963-80)

  • Matches O.D. and thickness of the stock early (1963-69) dampers
  • Counterbalance weight matches the stock 28 ounce inches
  • Overall balance specifications are held tighter than the original O.E. tolerances
  • Dual Bolt Pattern - both the "early" 3-bolt and the "late" 4-bolt patterns
  • Removeable Counterweight - if building a neutral balance engine simply remove the bolt-in counterweight on the back of the damper

50 oz. Balancer (S/B Ford V8 1981-95)

  • Made to the early short length of 3" - allows the use of a late 5.0L engine with a 50 oz. in. damper to be used in an early chassis where front clearance is at a minimum
  • To fit in late vehicles, use spacers to provide the correct front pulley alignment
  • Dual Bolt Pattern - both the "early" 3-bolt and the "late" 4-bolt patterns
  • Plastic insert shown in photos can be used to center 3-bolt pulleys with a female pilot, or it can be removed to accept 3-bolt pulleys with a male pilot
  • Very versatile and can be used on many different Ford engines

Harmonic Balancer Technical Notes (PDF)

910-15365 Instructions (PDF)

Small Block Chevy Harmonic Balancer, 6-3/4 Inch, Black
(Part #91015358)
                        

Small block Chevy stock-type replacement 6-3/4" diameter harmonic balancer. For internal balance engines.

  • NOT recommended for RPMs in excess of 6500
  • NOT SFI certified
  • Internal balance

Item Details

Not SFI Certified
Small Block Chevy 400 Harmonic Balancer, 8 Inch, Plain Steel
(Part #91015400)
                        

Small block Chevy 400 c.i. V-8 stock-type replacement 8" harmonic balancers. External Balanced. Dampers are designed for press fit.

  • Ring and hub are bonded (vulcanized) to the elastomer
  • Surpasses the reliability and strength of OEM
  • NOT SFI-Approved
Professional Products 80010 Chevy 350 Lightweight Balancer, 6 Inch
(Part #91015363)
                        

This 6" harmonic balancer fits 350 c.i. Small Block Chevys and only weighs 5.1 lbs. Plus, the balancing cut out is on the backside so they cant tell what crank youre running. Damper is a press-on fit.

  • For internally balanced engines
  • Durable nodular iron construction
  • High temperature elastomer bond
  • Engraved timing marks every 90° 
  • Includes 60° of easy-to-read timing marks 
  • Rated to 10,000 RPM
  • NOT SFI approved

910-15363 Instructions (PDF) 

Technical Notes (PDF) 

Item Details

Internally Balanced
Chevy 383-400 Lightweight Balancer, 6-3/4 Inch
(Part #91015364)
                        

This 6-3/4" balancer fits 383/400 c.i. Small Block Chevys and only weighs 7-3/4 lbs. Plus, the balancing cut out is on the backside so they cant tell what crank youre running. Damper is a press-on fit.

  • Durable nodular iron construction
  • High temperature elastomer bond
  • This balancer is 1.20" thick
  • Rated to 6,500 RPM
  • NOT SFI approved 

Item Details

Externally Balanced
Speedway Chrome SB Chevy 400 Fluid Crank Damper, 7-1/4 Inch
(Part #91015329)
                        

Chrome plated steel balancer for S/B Chevy 383/400 c.i. V-8. Degreed from 10° ATDC to 50° BTDC. SFI serial number and timing marks are engraved on the outer ring.

  • Forged from 1025 low carbon steel  
  • Injected with high viscosity silicone fluid
  • External Balance 
  • Rated to 12,500 RPM
  • SFI 18.1 certified
  • 1.53" thickness excluding hub

Item Details

SFI 18.1 Certified
Speedway Chrome SB Chevy 350 Fluid Crank Damper, 6.25 Inch
(Part #91015330)
                        

Chrome plated steel balancer for S/B Chevy 350 c.i. V-8. Degreed from 10° ATDC to 50° BTDC. SFI serial number and timing marks are etched on the outer ring.

  • Forged from 1025 low carbon steel  
  • Injected with high viscosity silicone fluid
  • Rated to 12,500 RPM
  • SFI 18.1 certified
EngineQuest BA289N Small Block Ford 3-Bolt Balancer, 28 oz.
(Part #91015359)
                        This all new "early" style 28 oz. balancer works with 3-bolt pulleys. The 28 oz. balance factor is common to 1965-69 289, 1970-80 302, and 1970-96 351W.

Item Details

'''65-''69 289, ''70-''80 302, ''70-''96 351W'
Speedway Small Block Chevy 350 Fluid Crank Damper, 6.25 Inch
(Part #91015342)
                        

Balancer for Small Block Chevy 350 c.i. V-8. Degreed from 10o ATDC to 50o BTDC.  SFI 18.1 certified.

Item Details

6.25" SFI 18.1
Chevy 350 Harmonic Balancer, 8 Inch, Stainless Steel
(Part #91015348)
                        

Small block Chevy 350 c.i. V-8 stock-type replacement 8" harmonic balancers. Internal balanced. Dampers are designed for press fit.

  • Ring and hub are bonded (vulcanized) to the elastomer
  • Surpasses the reliability and strength of OEM
  • Stainless steel version features a show quality polish
  • NOT SFI-Approved
Small Block Chevy 400 Harmonic Balancer, 8 Inch, Stainless Steel
(Part #91015415)
                        

Small block Chevy 400 c.i. V-8 stock-type replacement 8" harmonic balancers. External Balanced. Dampers are designed for press fit.

  • Ring and hub are bonded (vulcanized) to the elastomer
  • Surpasses the reliability and strength of OEM 
  • Features a show quality polish
  • NOT SFI-Approved
Professional Products Small Block Chevy 6 Inch Harmonic Balancer, SFI
(Part #91090010)
                        

This is a SFI certified 6" internally balanced Small Block Chevy harmonic balancer. It has 60 timing marks plus engraved marks every 90 degrees.

  • 18.1 SFI Rating
  • Steel
  • Painted
  • Sold Individually 

 

Professional Products 2430208 S/B Ford 289-351W 28 oz Balancer
(Part #57524302)
                        

Small Block Ford 28 ounce steel damper works great for the experienced racer or for the weekend warrior. Constructed from high quality billet steel forgings with elastomer injected between component parts, they are manufactured with inner and outer ridgelines that secure the outer ring to the inner hub. These engine balancers include accurate crank bore for a proper pressed fit and meets SFI 18.1 specifications.

  • 18.1 SFI rating
  • 1968-97 Small Block Ford 289-351W
  • 6-1/2" O.D.
  • Billet steel construction
  • Laser engraved timing marks
  • Accurate crank bore for a proper pressed fit 
  • Elastomer injected between inner hub and outer ring

Installation Instructions