Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Hagan Street Rods 4-3RDLED 4 Inch Flush-Fit Third Brake Light

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge

X

Please NOTE the following about this product:

  • This item is sold as a kit.

Details

Reviews

Q & A

What's in the Box

There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

  • Housing is stainless steel
  • Has a electronic LED strip with 15 super bright red LED's
  • Lens is 1/2" by 4"
  • Comes with T bolts to hold housing in place

You may also be interested in:

Stainless Steel Lighted License Plate Bolts
                        These lighted stainless steel bolts were designed to be used with license plates but with a little imagination, the options are endless. Fully-sealed waterproof design is also shock and vibration-proof.   
  • Map light
  • Dash light
  • Courtesy lamp

Sold by the pair. White color bulb only.

Billet Aluminum LED Third Brake Light
                        Wire this third brake light in conjunction with tail lights. Billet aluminum with red lens. 

This LED third brake light is 2" tall and 7" wide. There is one wire coming through the base for power. A ground wire would be attached to the bottom of the mounting bolts at the base.


LED Cat Eye Tail Light
                        

This 12-volt, 12-LED tail light can be used as a stop/turn/tail or just use as a third stop light. Measures 7.25" long x 1-50" tall x .730" thick with a chrome bezel. Light is flat on the back side and comes with a mounting gasket.

10-32 mounting bolts (not) included.

LED Cat Eye Tail Light Installation Instructions (PDF) 

Oval LED Tail Light
                        

This 12-volt LED tail light has a stop/turn/tail and can be mounted on a flat surface. Measures 4-1/2" long x 2-9/16" tall.  Includes a rubber mounting gasket.

Requires 10-32 mounting bolts (not included).

LED Tail Light Installation Instructions (PDF) 

Hagan Street Rods 6-3RDLED 6 Inch Flush-Fit Third Brake Light
                        

There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

  • Housing is stainless steel
  • Has a electronic LED strip with 20 super bright red LED's
  • Lens is 1/2" by 6"
  • Comes with T bolts to hold housing in place
Hagan Street Rods fm8 3rdLED 8 Inch Flush-Fit Third Brake Light
                        

There's no cleaner way to integrate a third brake light into your street rod than with one of these flush-fit kits. These lights are designed to be mounted into the body, and then the lens is sanded down and polished flush with the body surface. Each light has a stainless steel housing and comes with a roll of super bright LED lights.

  • Housing is stainless steel
  • Has a electronic LED strip with 30 super bright red LED's
  • Lens is 1/2" by 8"
  • Comes with T bolts to hold housing in place