Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

HANS DK 11233-311 Hans Device Sport II-20 -Med-PA-SAH-Sliding Tether

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge





X

Details

Reviews

Q & A

What's in the Box

  • Rounded collar improves fitting
  • Same performance as all HANS Device models
  • Injection molded – lighter than Sport I, heavier than Pro Series
  • New DuPont polymer reduces weight
  • For SAH helmet applications only
  • Only available for 20 degrees seats

HANS Model and Size Tip (GIF)

You may also be interested in:

HANS DK11241-421 Hans Device Pro w/ Quick Click Anchors, 20 Deg, Large
                        

The HANS device stands for Head and Neck Support. It was designed with you and your family in mind. The goal in racing is to go faster than anyone else on the track and cross the finish line first. And as technology increases speeds, it also increases the risks. Remember, you a have a family to go home to when the night of racing is over.

The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

Hans Device Sizing Chart (Link)

Anchor Instructions (PDF) 

SFI Recertification Notice (Link)

NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

HANS Device Sport Series w/ Quick Click Anchors, 20 Degree, Large
                        

The HANS device stands for Head and Neck Support. It was designed with you and your family in mind. The goal in racing is to go faster than anyone else on the track and cross the finish line first. And as technologies increase speeds, it also increases the risks. Remember, you a have a family to go home to when the night of racing is over.

The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Sport Series weighs approximately 2.25lbs. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

The injection molded super structural gives the same protection as the Pro Series. It weighs about 2.25lbs but has a more attractive price.

Hans Device Sizing Chart (Link)

Anchor Instructions (PDF)

SFI Recertification Notice (Link)

NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

 

HANS Device Sport Series, Post Anchors, 20 Degree, Large
                        

The HANS device stands for Head and Neck Support. It was designed with you and your family in mind. The goal in racing is to go faster than anyone else on the track and cross the finish line first. And as technologies increase speeds, it also increases the risks. Remember, you a have a family to go home to when the night of racing is over.

The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Sport Series weighs approximately 2.25lbs. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

The injection molded super structural gives the same protection as the Pro Series. It weighs about 2.25lbs but has a more attractive price.

Hans Device Sizing Chart (Link)

QuickStart Guide (PDF)

Anchor Instructions (PDF)

SFI Recertification Notice (Link)

NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

 

HANS DK11241-321 Pro Series Device, Post Anchors, 20 Degree Large
                        

The HANS device stands for Head and Neck Support. It was designed with you and your family in mind. The goal in racing is to go faster than anyone else on the track and cross the finish line first. And as technology increases speeds, it also increases the risks. Remember, you a have a family to go home to when the night of racing is over.

The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

Hans Device Sizing Chart (Link)

QuickStart Guide (PDF)

Anchor Instructions (PDF)  

SFI Recertification Notice (Link)

NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

HANS Device Sport Series, Post Anchors, 20 Degree, Medium
                        

The HANS device stands for Head and Neck Support. It was designed with you and your family in mind. The goal in racing is to go faster than anyone else on the track and cross the finish line first. And as technologies increase speeds, it also increases the risks. Remember, you a have a family to go home to when the night of racing is over.

The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Sport Series weighs approximately 2.25lbs. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

The injection molded super structural gives the same protection as the Pro Series. It weighs about 2.25lbs but has a more attractive price.

Hans Device Sizing Chart (Link)

QuickStart Guide (PDF)

Anchor Instructions (PDF)

SFI Recertification Notice (Link)

NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

 

HANS DK11241-311 Hans Device Pro-20LP Post Anchors Sliding SAH Helmets
                        

Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

Hans Device Sizing Chart (Link)

QuickStart Guide (PDF)

Anchor Instructions (PDF)  

SFI Recertification Notice (Link)

NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

 

HANS Device Sport Series with Post Anchors and Sliding SAH, 20LS
                        

Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Sport Series weighs approximately 2.25lbs. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

The injection molded super structural gives the same protection as the Pro Series. It weighs about 2.25lbs but has a more attractive price.

Hans Device Sizing Chart (GIF)

QuickStart Guide (PDF)

Anchor Instructions (PDF)

SFI Recertification Notice (Link)

NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

 

HANS Device Sport Series W/ Post Anchors & Sliding SAH, 20MS
                        

Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Sport Series weighs approximately 2.25lbs. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

The injection molded super structural gives the same protection as the Pro Series. It weighs about 2.25lbs but has a more attractive price.

Hans Device Sizing Chart (GIF)

QuickStart Guide (PDF)

Anchor Instructions (PDF)

SFI Recertification Notice (Link)

NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

 

HANS Device Sport Series SAH W/ Quick Click & Sliding, 20 Deg Large
                        

Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Sport Series weighs approximately 2.25lbs. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

  •   This is SFI 38.1

The injection molded super structural gives the same protection as the Pro Series. It weighs about 2.25lbs but has a more attractive price.

Hans Device Sizing Chart (Link)

Anchor Instructions (PDF)

SFI Recertification Notice (Link)

NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

 

HANS DK11241-411 Hans Device Pro w/ Quick Click & Sliding SAH, 20LP
                        

Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

Hans Device Sizing Chart (Link)

Anchor Instructions (PDF) 

NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

 

 This hans device is garage sale priced because it has been used on a display and can't be sold as a first. 

 

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

HANS Device Sport Series W/ Quick Click & Sliding SAH, 20 Degree Medium
                        

Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Sport Series weighs approximately 2.25lbs. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

  •   This is SFI 38.1

The injection molded super structural gives the same protection as the Pro Series. It weighs about 2.25lbs but has a more attractive price.

Hans Device Sizing Chart (Link)

Anchor Instructions (PDF)

SFI Recertification Notice (Link)

NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

 

HANS DK11233-411 Hans Device Sport II-20 -Med-QC-SAH-Sliding Tether
                        
  • Rounded collar improves fitting
  • Same performance as all HANS Device models
  • Injection molded – lighter than Sport I, heavier than Pro Series
  • New DuPont polymer reduces weight
  • For SAH Helmets that are equipped with an M6 terminal or nut already built into the helmet
  • Only available for 20 degrees seats

HANS Model and Size Tip (GIF)

HANS DK 11243-311 Hans Device Sport II-20 -Large-PA-SAH-Sliding Tether
                        
  • Rounded collar improves fitting
  • Same performance as all HANS Device models
  • Injection molded – lighter than Sport I, heavier than Pro Series
  • New DuPont polymer reduces weight
  • For SAH helmet applications only
  • Only available for 20 degrees seats

HANS Model and Size Tip (GIF)

HANS DK 11243-411 Hans Device Sport II-20 -Large-QC-SAH-Sliding Tether
                        
  • Rounded collar improves fitting
  • Same performance as all HANS Device models
  • Injection molded – lighter than Sport I, heavier than Pro Series
  • New DuPont polymer reduces weight
  • For SAH Helmets that are equipped with an M6 terminal or nut already built into the helmet
  • Only available for 20 degrees seats

HANS Model and Size Tip (GIF)