Grant 3196 3-Bolt Steering Wheel Adapter, GM Applications

							                        

                                                        
This polished billet aluminum steering wheel adapter allows you to put common 3-bolt steering wheels on Ididit and most 1969-1994 GM columns. This hub adapter comes with a spring for the horn button and a plunger/spring assembly.
Top is 11/16" x 36 spline I.D. (GM, Ididit, Flaming River columns)
Bottom is 1/2" straight and .753 I.D. to fit a 3/4" shaft
1-3/16" tall
2-1/2" I.D. holes for the horn plunger lead wire
Standard 3-bolt pattern for custom steering wheels in 1/4" fine thread
 
                                                    

						                        

							                        

                                                        
This steering wheel adapter allows you to put an aftermarket 3-bolt steering wheel on a GM, Ididit or Flaming River steering column. Horn button not included. Includes black metal cover, horn button spring, spacer ring, plunger spring, lead wire and three mounting bolts. 
Adapter Application Chart (GIF) 
Note: When using this adapter, if the column has not previously had a steering wheel mounted, # 910-64049 will also be required. 
Steering Wheel Installation Instructions (PDF)
11/16" x 36 spline I.D.
2-1/2" O.D.
1" tall
2-3/8" I.D. holes for the horn plunger lead wire
Standard 3-bolt pattern for custom steering wheels in 1/4" fine thread
Black metal cover is 4" O.D. and 1" tall. Not plastic!
Horn button isolator plate is 2-15/16" O.D.
 
                                                    

						                        

							                        

                                                        
This is the standard Grant steering wheel installation kit for Ford steering columns. These kits may be used to install all Classic Series, Challenger Series or Signature Series steering wheels. Each kit contains complete step-by-step instructions, a die cast hub, Grade 5 hardware and matte black trim pieces.
Adapter Application Chart (GIF)
410-3285 Instructions (PDF)
                                                    

						                        

							                        

                                                        
This is the standard Grant steering wheel installation kit for Ford steering columns. These kits may be used to install all Classic Series, Challenger Series or Signature Series steering wheels. Each kit contains complete step-by-step instructions, a die cast hub, Grade 5 hardware and matte black trim pieces.
Adapter Application Chart (GIF)
410-3294 Instructions (PDF)
                                                    

						                        

							                        

                                                        
This is the standard Grant steering wheel installation kit for Ford steering columns. These kits may be used to install all Classic Series, Challenger Series or Signature Series steering wheels. Each kit contains complete step-by-step instructions, a die cast hub, Grade 5 hardware and matte black trim pieces.
Adapter Application Chart (GIF)
410-3249 Instructions (PDF)
                                                    

						                        

							                        

                                                        
Grant Billet Style Installation Kits are an optional styling upgrade.  The Billet Style Kits have Grant's five-hole mounting pattern. The cool  thing about the Billet Kits is they are designed to put the  wheel back in as close to the stock position as possible. You cannot use  this kit to install a Classic/Challenger/Performance Series Wheel (3  Bolt Pattern wheels).        These adapters let you install Grant Signature Series and Collectors Edition steering wheels on these GM vehicles:
 1969-1994 GM cars
1974-1994 GM trucks
1982-1994 GM vans
The standard shaft size this  adapter fits is .688" or 11/16" by 36 spline.  These are polished billet aluminum adapters. 
Note: Ididit,  Flaming River, and Classic use the same diameter and spline count on  MOST of their aftermarket columns for specific applications as the 69-94  GM but not ALL. For verification we suggest contacting your steering column manufacturer with the  part number of your column to insure correct fit. 
Grant Steering Wheel Adapter Instructions (PDF) 
                                                    

						                        

							                        

                                                        
This steering wheel adapter allows you to put an aftermarket 3-bolt  steering wheel on a 1969-1994 GM, Ididit or Flaming River steering  column. Horn button not included. Includes black metal cover, horn  button spring, spacer ring, plunger spring, lead wire and three mounting  bolts. 
2-3/8" I.D. holes for the horn plunger lead wire.
Standard 3-bolt pattern for custom steering wheels in 1/4" fine thread.
Horn button isolator plate is 2-15/16" O.D.
Adapter Application Chart (GIF) 
Note: When using this adapter, if the column has not previously had a steering wheel mounted, # 910-64049 will also be required. 
91032481 Instructions (PDF)