Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

Global West Suspension TBF-7 1968-73 Mustang Lower Control Arms


Material Type:
Overall Width:
Overall Length:
Sold in Quantity:
Powder Coated
Tube O.D.:
Hole Diameter:
MFG. Part #:
Control Arm Bushing to Ball Joint Center:

Share by Email


Click image to enlarge

Watch the video below for more information regarding installation of the Global West control arm.


Please NOTE the following about this product:

  • This item is sold as a pair.



Q & A

What's in the Box

Global West tubular lower control arms improve the geometry of the stock Mustang suspension while adding much needed strength. 

  • Stock length, non-adjustable design 
  • Uses screw-in style ball joints
  • Accepts stock strut rods or Global West adjustable strut rods
  • Spherical bearing eliminates suspension bind

You may also be interested in:

Global West Suspension MNR-733 1967-1973 Mustang Upper Control Arms

Global West Negative Roll tubular upper control arms improve the geometry of the stock Mustang suspension while adding additional strength. The arms come pre-assembled and are supplied with billet steel cross shafts, Del-A-Lum low friction bushings, ball joints, and instructions. 

  • Requires drilling new mount holes in your shock tower
  • Includes drill template
  • Changes camber curve when used with Global West lower arms
  • Generates negative camber to keep tire foot print flatter on the pavement
  • Gain improved cornering and longer tire life
Mustang Tubular Control Arms - Strut Bushings

Global West improves the geometry of the stock Mustang suspension and incorporates it into their tublar upper and lower control arms. The upper control arms are pre-assembled and are supplied with billet upper control arm shafts, Del-a-lum ball joints, and instructions. 

Lower arms use a screw-in style ball joint. Can be used with stock strug rods using our high durometer bushings or step up to the high performance strut rods. 

Global West Suspension ASR-6 1968-73 Mustang Adjustable Strut Rods

Stock '68-'73 Mustang strut rods used a flimsy rubber bushing to control fore & aft movement of the wheel during suspension travel. This design was prone to deflection during hard acceleration and braking. A more positive approach to the problem would be to install an adjustable strut rod kit with a spherical rod end in place of the rubber bushing. Global Wests strut rods are designed as a bolt on application. No welding or frame modifications are required. When using a strut rod design of this nature, the deflection is totally eliminated. The suspension no longer deflects fore and aft. The vehicle now sees a lower a-arm rather than a two component system (strut rod & lower arm).

  • Bolt on application, no frame modifications 
  • Allows you to dial-in your front suspension
  • Adjusting sleeve uses standard open-end wrench, no special tools required
  • Rods are powercoated black
  • Hardware included