Gilmer Drive Belts
Click image to enlarge
Q & A (0)
What's in the Box
InfoGilmer Replacement belts availabe in 1/2" and 1" widths and several lengths: 22-1/2", 24", 25-1/2", 27", 30", 32-1/5", and 34-1/2".
No questions have been asked.
You may also be interested in:
Gilmer Belt Power Steering/Dry Sump Oil Pump Drive KitView$89.99
Brinn 38016 Gilmer Mandrel Drive Pulley, 16 ToothView$29.99
Brinn 38030 Gilmer Water Pump Drive Pulley, 28 ToothView$84.99
Brinn 38032 Gilmer Power Steering Drive Pulley, 32 ToothView$89.99
Small Block Chevy Short Water Pump Gilmer Drive KitView$97.99
Quick ViewQuick View Detailsx
- Both upper and lower pulleys included
- Upper 28 tooth pulley, 16 tooth lower pulley and 22-1/2" Gilmer belt
- 43% reduction to eliminate overheating and belt slippage
- Adjustable water pump 910-15582 is recommended for use with this kit
- Must be used in conjunction with Mandrel Drive Kit # 913-15920 as noted below.
Note: This kit will work with most "short" water pumps, but hub heights do vary slightly depending on manufacturer. Some modification of the mounting holes may be required. This kit WILL NOT work with "long" water pumps as the crankshaft to hub center height is 5/16" greater than that of a "short" pump.
Get the correct pulleys for your application by learning which water pump you have as explained in our tech article. SBC - Short vs Long Water Pump.Compare