Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Garage Sale - Wilwood 1964-74 GM Front Disc 10.75 Inch Pro Series Brake Kit

Price:$682.99
Sale:$580.99
$102.00 off
We're sorry, this item is not available.
Garage Sale - Wilwood 10.75" Pro Series Brake Kit
Price:
$682.99
EA
Sale Price:
$580.99
Discontinued
Item #:
8351402285
Item Details:
Clearance!
Garage Sale - Wilwood 1964-74 GM Front Disc 10.75 Inch Pro Series Brake Kit
Click image to enlarge Click image to enlarge
  • Garage Sale - Wilwood 1964-74 GM Front Disc 10.75 Inch Pro Series Brake Kit
  • Garage Sale - Wilwood 1964-74 GM Front Disc 10.75 Inch Pro Series Brake Kit
No video at this time.
 

Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders.

10.75" Pro Series Brakes feature:

  • Forged 4-pistonDynalite Calipers - black finish
  • 10.75" diameter Ultralite HP 30 Vane rotors - plain finish
  • Wilwood BP-10SmartPads - low noise, low dust
  • Lightweight anodized aluminum Pro Street hubs
  • Kit mayfit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.

All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.

835-1402285 Instructions (PDF)

 

Applications include:

  • 1967-1969 Camaro
  • 1967-1974 Nova
  • 1967-1972 Chevelle
  • 1964-1966 Chevy II*
  • 1964-1966 Chevelle*

*Drilling and tapping of spindle top anchor pin holes, as well as enlarging one of the lower spindle bolt holes, is required. These modifications can be easily performed by the average builder.

Rotors in both kits accept both 5 x 4.5" and 5 x 4.75" bolt patterns.

  1. OEM rubber brake hoses generally cannot be adapted to Wilwood calipers. The caliper inlet fitting is a 1/8-27 NPT. The preferred method is to use steel adapter fittings at the caliper, either straight, 45 or 90 degree and enough steel braided line to allow for full suspension travel and turning radius, lock to lock.
  2. Kit fits some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.

  3. Wilwood Kit Information (all kits):

    • OE Hub Offset: +.18"
    • Spindle Type: Disc
    • Piston Area (Inches Squared): 4.8"
    • Piston Type: Stainless
    • Brake Pad Area (Inches Squared): 6.36"
    • Brake Pad Volume (Inches Cubed): 2.1"
    • Rotor Material: Iron
    • Rotor Width: .81"
    • Wheel Stud Diameter - 1/2"-20

 

Wilwood Kit Information (all kits):

  • OE Hub Offset: +.18"
  • Spindle Type: Disc
  • Piston Area (Inches Squared): 4.8"
  • Piston Type: Stainless
  • Brake Pad Area (Inches Squared): 6.36"
  • Brake Pad Volume (Inches Cubed): 2.1"
  • Rotor Material: Iron
  • Rotor Width: .81"
  • Wheel Stud Diameter - 1/2"-20

 

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
Our Techs also Suggest the Following:
120-6816 - Wilwood 1.75" Piston - .810" Rotor
Price:
$124.99
EA
In Stock
Item #:
8351206816
You May Also Be Interested In...
  • Braided Stainless AN 12 Inch Brake Line
    Braided Stainless AN 12 Inch Brake Line
    (6 Ratings)
    Price: $9.99
    More Info
    Braided Stainless AN 12 Inch Brake Line
    x 
    							                        
    
                                                        
    Braided stainless covering over a Teflon inner liner. These are perfect for brake lines, clutch lines and gauge lines. These have straight AN3 or AN4 fittings on both ends. Sold each. 
                                                 
                                                                                              
                                                     AN 3 O.D. is .265 and AN 4 O.D. is .305
    Select applicable length. AN size is the "-#" at the end of each part number.
  • Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    (4 Ratings)
    Price: $239.99
    More Info
    Speedway Deluxe 1964-74 GM Car Front Disc Brake Kit
    x 
    							                        
    
                                                        
    Front disc brakes provide a significant improvement in braking performance versus the drum brakes your car came with. This complete front disc brake conversion kit fits 1964-72 GM A-Body, 1967-69 GM F-Body and 1968-74 X-Body using your stock disc brake spindles or our new replacement stock height disc brake spindles # 910-34900.
    Kit includes 11" diameter vented brake rotor with 5 on 4-3/4" wheel bolt pattern, '69-'77 GM style calipers (7/16"-20 inlets), caliper brackets, brake pads, backing plates, rubber brake lines, and all necessary bearings, seals and hardware for an easy, complete installation onto factory disc brake spindles.
    Note:  Brake kit will not fit our 2" dropped spindles or stock drum brake spindles. Must be used with stock style disc brake spindles and 15" diameter or larger wheels.
    910-31958 Instructions (PDF)
  • Straight 3/8 Inch-24 IFF to AN 4 Male Adapters
    Straight 3/8 Inch-24 IFF to AN 4 Male Adapters
    (1 Rating)
    Price: $9.99
    More Info
    Straight 3/8 Inch-24 IFF to AN 4 Male Adapters
    x 
    							                        
    
                                                        AN male all Steel adapters sold in pairs.
  • Wilwood 140-7675 1964-74 GM Front Disc 12.19 Inch Big Brake Kit
    Wilwood 140-7675 1964-74 GM Front Disc 12.19 Inch Big Brake Kit
    Price: $737.99
    More Info
    Wilwood 140-7675 1964-74 GM Front Disc 12.19 Inch Big Brake Kit
    x 
    							                        
    
                                                        
    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders. 
    12.19" Big Brake Series features:
    • Forged 4-pistonDynalite Calipers - black finish
    • 12.19" diameter Ultralite HP 32 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Minimum wheel diameter of 16"
    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.
    835-1407675 Instructions (PDF)
  • Wilwood 140-10996 1964-74 GM Front Disc 11 Inch Pro Series Brake Kit
    Wilwood 140-10996 1964-74 GM Front Disc 11 Inch Pro Series Brake Kit
    Price: $687.99
    More Info
    Wilwood 140-10996 1964-74 GM Front Disc 11 Inch Pro Series Brake Kit
    x 
    							                        
    
                                                        
    Need a big brake package that can scrub off serious speed and look great doing it?Wilwood's Forged Dynalite Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditionaldisc brakespindle applications onclassic Chevymuscle cars. All kits can be used with manual or power boost master cylinders. 
    11.00" Pro Series Brakes feature:
    • Forged 4-pistonDynalite Calipers - black finish
    • 11.00" diameter Ultralite HP 30 Vane rotors - plain finish
    • Wilwood BP-10SmartPads - low noise, low dust
    • Lightweight anodized aluminum Pro Street hubs
    • Provides plenty of clearance inside popular 15” wheels. 
    All kits include calipers, hubs, rotors, brackets and hardware needed. Brake hoses sold separately.
    835-14010996 Instructions (PDF)
  • SSBC 1964-74 GM Competition Drum to Disc Brake Conversion
    SSBC 1964-74 GM Competition Drum to Disc Brake Conversion
    Price: $599.99 - $669.99
    Selected items on sale
    Up to $65.00 off
    More Info
    SSBC 1964-74 GM Competition Drum to Disc Brake Conversion
    x 
    							                        
    
                                                        
    Bolt-in ultra high performance disc brake conversion kit for 1964-74 GM A, F, & X Body. Kit includes street 4-piston aluminum calipers with 45mm stainless pistons, performance brake pads, mounting brackets, 11" Big Bite cross drilled rotors, and hardware. 
    • 100% Made in the USA 
    • 15" wheel compatible 
    • Calipers are constructed from 6061-T6 billet aluminum
    • Assembled with stainless steel pistons and bleeder screws
    • 25% more pad contact area than other calipers with this mount
    • 20% thicker pads than other calipers with this mount
    • Dual pad pin design with o-rings to eliminate pad chatter
    • Use any off-the-shelf D43 pad from any local parts store
    Calipers are available in plain finish (clear coated) billet, fully polished, red powder coat, or black powder coat.