Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
CLOSE [X]

Garage Sale - Universal Pull Type Slave Cylinder, 7/8 Inch Bore

Price:$56.99
Sale:$46.99
We're sorry, this item is not available.
Garage Sale - Universal Pull Type Slave Cylinder, 7/8"
Price:
$56.99
EA
Sale Price:
$46.99
Discontinued
Item #:
556NP102U
Item Details:
Clearance!
Garage Sale - Universal Pull Type Slave Cylinder, 7/8 Inch Bore
Click image to enlarge Click image to enlarge
No video at this time.
 

Universal pull type slave cylinder for clutch use. Features a 7/8" bore, 1" of travel, and a female 1/8" NPT inlet. For most multi-disc clutch set-ups we recommend the use of a 3/4" master cylinder. For Stock and Ram couplers, use a 7/8" master cylinder.

It is supplied with a 90 degree inlet fitting that will accept a typical 3/16" steel brake line. That fitting can be removed and can be replaced with a 1/8 NPT to AN3 or AN4 adapter so that you could use one of our braided stainless lines.

556-NP102U Instructions (PDF)

 

This cylinder is garage sale priced because it is new old stock.

 

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • 556NP102U
    Overall Length
    13.000"
    Body Length
    4.090"
    Extended Length
    11.500" (11 1/2")
    Compressed Length
    10.750" (10 3/4")
    Shaft Diameter
    0.380"
    Travel
    1.000"
    Bore Size
    0.875" (7/8")
    Inlet fitting
    1/8" NPT
    Thread Pitch
    5/16"-24
    Threads
    RH Male
    Finish
    Anodized
    Material Type
    Aluminum
    Color
    Purple
    Sold in Quantity
    Each
    Notes
    We suggest using with a 3/4" bore M.C. 3/8"-24 IFF adapter inlet fitting included attaches to 3/16" brake line. Fitting can be removed and replaced with an AN fitting for use with our braided stainles
  • Length is retained by a lock nut
  • Bleeder adapter and bleeder are included
  • Cylinder body is 1-7/16" O.D. at end by fittings
  • Cylinder body is 1-3/8" at opposite end of fittings
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Print Page
You May Also Be Interested In...
  • Wilwood 340-1290 Forward Swing Mount Single Master Cylinder Pedal
    Wilwood 340-1290 Forward Swing Mount Single Master Cylinder Pedal
    (3 Ratings)
    Price: $62.99
    More Info
    Wilwood 340-1290 Forward Swing Mount Single Master Cylinder Pedal
    x 
    							                        
    
                                                        
    This pedal is often used as a clutch pedal with a single outlet master cylinder, or as a brake pedal in conjunction with dual outlet, tandem master cylinders on four wheel brake equipped vehicles. The pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad. 
    Swing mount has a 7.00 to 1 pedal ratio.
    Pedal Dimensions (Link)
    Detailed Schematic of Pedal 
  • Speedway GM Standard Clutch Throwout Fork
    Speedway GM Standard Clutch Throwout Fork
    (4 Ratings)
    Price: $17.99
    More Info
    Speedway GM Standard Clutch Throwout Fork
    x 
    							                        
    
                                                        Standard style fork with a pocket for the clutch pushrod. Fork fits 1973-1984 GM 6 & 8 cylinder cars and trucks. May fit earlier vehicles with slight modification.
  • Speedway Pull Type Slave Cylinder
    Speedway Pull Type Slave Cylinder
    (3 Ratings)
    Price: $34.99
    More Info
    Speedway Pull Type Slave Cylinder
    x 
    							                        
    
                                                        
    Speedway pull type slave cylinder with 7/8" bore for clutch use. Works great with stock-style hydraulic throwout bearings or Ram Couplers. Has a 3/8"-24 inverted flare female inlet. Bleeder adapter and bleeder are included.
    • Ram shaft is 3/8" O.D.
    • Cylinder body is 4.09" long
    • Cylinder body is 1-7/16" O.D. at end by fittings
    • Cylinder body is 1-3/8" at opposite end of fittings
    A 5/16” heim will fit both ends of cylinder (not included). Our heim part number is 1750202.

    Note: For most multi-disc clutch set-ups we recommend the use of a smaller 3/4" bore master cylinder.
  • Wilwood 260-1304 Clutch & Small Brake Master Cylinder
    Wilwood 260-1304 Clutch & Small Brake Master Cylinder
    (5 Ratings)
    Price: $49.99
    More Info
    Wilwood 260-1304 Clutch & Small Brake Master Cylinder
    x 
    							                        
    
                                                        
    This popular, lightweight, compact design is used for clutch and small master cylinder requirements and is well known for its dependability. It incorporates an improved plastic screw-on filler cap which protects the fluid in the 1.4 ounce reservoir.
    • Includes fitting to accept 3/8"-24 inverted flare from 3/16" hard line
    • If AN-3 or AN-4 flex line is to be used, the following adapters will work: 
      • 910318-3/8  (3/8"-24 to AN-3 Male Brake Fitting)
      • 6174030  (3/8"-24 Inverted Flare to AN-4 Fitting)
    External Dimensions (Link) 
    Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 
  • Wilwood 260-1333 Slave Cylinder
    Wilwood 260-1333 Slave Cylinder
    (1 Rating)
    Price: $73.99
    More Info
    Wilwood 260-1333 Slave Cylinder
    x 
    							                        
    
                                                        
    • “Pull Type” slave cylinder with 7/8" bore
    • Billet aluminum for high strength 
    • Plated with a tough anti-corrosion finish
    • Stainless steel push rod has a longer stroke than most cylinders assuring a full release of the clutch 
    • Ideal for Drag Racing, Late Model Stock, Pro Series and Off Road applications 
    • Recommended master cylinder sizing is 3/4”
    • Overall length:  11.70"
    • Inlet size:  1/8-27 NPT
    • Inletfit:  3/8-24 IF Female
    • Stroke:  1.38
    • Volume:  0.60