Products to Compare (max of 3)
X
Compare These Parts
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Help Center
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
Shop By
Support
Account
Add to Cart
$49.99
$34.99
Garage Sale - Speedway 1979-Up GM Metric Brake Rotor, 5 on 4-3/4 Inch, 10-1/2 Inch
Garage Sale - Speedway 1979-Up GM Metric Brake Rotor, 5 on 4-3/4 Inch, 10-1/2 Inch

Garage Sale - Speedway 1979-Up GM Metric Brake Rotor, 5 on 4-3/4 Inch, 10-1/2 Inch

0 Reviews | 0 Answered Questions
In Stock
Can Ship FREE
Garage Sale - Speedway 1979-Up GM Metric Brake Rotor, 5 on 4-3/4 Inch, 10-1/2 Inch
Image Gallery
Garage Sale - Speedway 1979-Up GM Metric Brake Rotor, 5 on 4-3/4 Inch, 10-1/2 Inch Garage Sale - Speedway 1979-Up GM Metric Brake Rotor, 5 on 4-3/4 Inch, 10-1/2 Inch Garage Sale - Speedway 1979-Up GM Metric Brake Rotor, 5 on 4-3/4 Inch, 10-1/2 Inch
Garage Sale - Speedway 1979-Up GM Metric Brake Rotor, 5 on 4-3/4 Inch, 10-1/2 Inch
Zoomed In Image
Part # UP61977
Save 30%
$34.99
$49.99
each
Quantity:
Add to Cart
Call to Order
Add to Buildlist
Compare

Details
Reviews
Q&A
Articles

Important Messages:

  • Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.

Details

Info

These rotors are garage sale priced because the centers have some casting flaws.

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

This 1979-up GM Metric front disc brake rotor will work with a Set # 6 inner bearing/race which fits most spindles. 5 on 4-3/4" with 7/16"-20  studs installed. 10.5" diameter x 1".  Must be used with 912-TS3 outer bearings for 1982-1987 spindle applications.  IMCA Approved.

This is a 1979-1981 Metric GM rotor with the bolt pattern changed to 5 on 4-3/4". It can be used on 1982-1987 GM metric spindles if you use our bearing/seal kit 91031048, or use at least the 1979-1981 style outer bearing 912TS3.

This rotor is designed for dirt track applications and should NOT be used for asphalt racing.

Notes

Proper Break-In Procedure for Steel or Cast Iron Rotors

New steel/iron rotors should be bedded in before being used in racing conditions. Proper bedding will prepare the rotor surface, prolong the rotor's life, and make it more resistant to thermal checking or cracking under severe braking conditions. The following procedures should be performed when bedding in both steel and cast iron rotors. It is best to bed in a new rotor using a used set of pads, preferably ones which will not create heat rapidly. Generating heat too rapidly will thermal shock the rotors. Likewise, when bedding in a new set of brake pads it is best to perform the process on a used rotor. This new/used bedding process permits controlled bedding of each individual component.

Make sure rotor surfaces are free from oils, grease, and brake fluid. Run vehicle up to a moderate speed and make several medium deceleration stops to heat up the rotor slowly. This will help reduce the chance of thermal shock caused by uneven heating of the rotor. Pull into the pits and allow the rotor to cool to ambient air temperature. Care should be taken not to ride the brakes into the pits as this may hot spot the rotor causing premature wear to the surface or structural damage.

Specs

Material Type:
Steel
Sold in Quantity:
Each
Bolt Pattern:
5 on 4.75"
Finish:
Natural
Rotor Diameter:
10.50
Rotor Construction:
Vented
Rotor Location:
Front
Rotor Shape:
Round
Thread Pitch:
7/16"-20
MFG. Part #:
1015549
Garage Sale:
Yes
Drilled:
No
Slotted:
No
Stud Length:
0.92
Stud Diameter:
0.44
Rotor Thickness:
1.04
Weight:
19.30

More Like This

Reviews

Q & A

Articles

You May Also Like

Suggestions
Error
Note
Ok