Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
We're sorry, this item is not available.
We're sorry, this item is not available.
Garage Sale - HANS DK11131-411 Hans Device Pro w/ Quick Click & Sliding SAH, 10MP
Click image to enlarge Click image to enlarge




 

Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

Hans Device Sizing Chart (Link)

Anchor Instructions (PDF) 

NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

 

This is garage sale priced because it has been discontinued.

 

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Our Techs also Suggest the Following:
HANS DK11131-421 Hans Device Pro w/ Quick Click Anchors, 10 Deg-Medium
Price:
$1,045.99
EA
Sale Price:
$995.99
Item #:
Item Details:
Quick Click anchors w/ sliding tether
You May Also Be Interested In...
  • Price: $985.99
    Sale Price: $885.99
    $100.00 off
    More Info
    Garage Sale - HANS Device Pro Series SAH, Post Anchors & Sliding, 20MP
    x
    							                        

    Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

    This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

    The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

    Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

    Hans Device Sizing Chart (Link)

    QuickStart Guide (PDF)

    Anchor Instructions (PDF)  

    SFI Recertification Notice (Link)

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

     

  • Price: $985.99
    Sale Price: $885.99
    $100.00 off
    More Info
    HANS DK11241-411 Hans Device Pro w/ Quick Click & Sliding SAH, 20LP
    x
    							                        

    Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

    This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

    The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

    Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

    Hans Device Sizing Chart (Link)

    Anchor Instructions (PDF) 

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

     

     This hans device is garage sale priced because it has been used on a display and can't be sold as a first. 

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS 

  • Price: $985.99
    Sale Price: $885.99
    $100.00 off
    More Info
    Garage Sale - HANS Device Pro Series with Quick Click and Sliding SAH, 20MP
    x
    							                        

    Being the leader in head restraint technology HANS has answered the call with new devices designed specifically for the new SAH2010 helmets. This will affect the BELL Pro and ULTRA series helmets and any other helmet that has the 6mm attachement nut installed from the manufacturer. For the standard post and anchor style of device they come with a post that can be indexed. All parts and devices sold for the SAH2010 helmets will not require the nutwashers so you save on the cost of the post kits and/or devices.

    This is built specifically for SAH Helmets and does not come with the nutwashers. Will not work on SA rated helmets.

    The primary difference between the Pro Series and the Sport Series is the weight. There is no difference in the safety protection offered with either one. The Pro Series weighs approx 1 lb. less than the Sport. We offer both models with quick disconnect sliding tethers. This gives you the most mobility and vision. You will need a 1/4" drill bit and a measuring tape to install the HANS device anchors to your helmet. Complete instructions and a special tool are included.

    Made with high modulous carbon fiber this is the ultimate in lightweight protection.  Includes quick disconnect and sliding tethers.

    Hans Device Sizing Chart (Link)

    Anchor Instructions (PDF) 

    NOTE: These items will only be shipped to an address in the US, Canada and Mexico.

     

    This is garage sale priced because it has been discontinued.

     

    NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS  

  • Price: $685.99
    Sale Price: $589.99
    $96.00 off
    More Info
    HANS DK 11243-411 Hans Device Sport II-20 -Large-QC-SAH-Sliding Tether
    x
    							                        

    • Rounded collar improves fitting
    • Same performance as all HANS Device models
    • Injection molded – lighter than Sport I, heavier than Pro Series
    • New DuPont polymer reduces weight
    • For SAH Helmets that are equipped with an M6 terminal or nut already built into the helmet
    • Only available for 20 degrees seats

    HANS Model and Size Tip (GIF)